Carbon-based Catalysts by Structural Manipulation with Iron for Oxygen Reduction Reaction

Yao Wang,Wei Chen,Yong Chen,Bin Wei,Linhui Chen,Lishan Peng,Rui Xiang,Jing Li,Zhongchang Wang,Zidong Wei

DOI: https://doi.org/10.1039/c8ta02166j

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:A facile structural manipulation of carbon-based catalysts by iron is reported, producing a catalyst superior to Pt/C in ORR activity.

What problem does this paper attempt to address?

Contracted Fe-N5-C11 Sites in Single-Atom Catalysts Boosting Catalytic Performance for Oxygen Reduction Reaction.

Chao Xu,Yan-Ping Zhang,Tian-Long Zheng,Zhi-Qiang Wang,Ye-Min Zhao,Peng-Peng Guo,Chen Lu,Kun-Zu Yang,Ping-Jie Wei,Qing-Gang He,Xue-Qing Gong,Jin-Gang Liu

DOI: https://doi.org/10.1021/acsami.3c03982

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:Promoting the catalyst performance for oxygen reduction reaction (ORR) in energy conversion devices through controlled manipulation of the structure of catalytic active sites has been a major challenge. In this work, we prepared Fe-N-C single-atom catalysts (SACs) with Fe-N5 active sites and found that the catalytic activity of the catalyst with shrinkable Fe-N5-C11 sites for ORR was significantly improved compared with the catalyst bearing normal Fe-N5-C12 sites. The catalyst C@PVI-(TPC)Fe-800, prepared by pyrolyzing an axial-imidazole-coordinated iron corrole precursor, exhibited positive shifted half-wave potential (E1/2 = 0.89 V vs RHE) and higher peak power density (Pmax = 129 mW/cm2) than the iron porphyrin-derived counterpart C@PVI-(TPP)Fe-800 (E1/2 = 0.81 V, Pmax = 110 mW/cm2) in 0.1 M KOH electrolyte and Zn-air batteries, respectively. X-ray absorption spectroscopy (XAS) analysis of C@PVI-(TPC)Fe-800 revealed a contracted Fe-N5-C11 structure with iron in a higher oxidation state than the porphyrin-derived Fe-N5-C12 counterpart. Density functional theory (DFT) calculations demonstrated that C@PVI-(TPC)Fe-800 possesses a higher HOMO energy level than C@PVI-(TPP)Fe-800, which can increase its electron-donating ability and thus help achieve enhanced O2 adsorption as well as O-O bond activation. This work provides a new approach to tune the active site structure of SACs with unique contracted Fe-N5-C11 sites that remarkably promote the catalyst performance, suggesting significant implications for catalyst design in energy conversion devices.
Single-Atom Iron Catalysts on Overhang-Eave Carbon Cages for High-Performance Oxygen Reduction Reaction

Chun-Chao Hou,Lianli Zou,Liming Sun,Kexin Zhang,Zheng Liu,Yinwei Li,Caixia Li,Ruqiang Zou,Jihong Yu,Qiang Xu

DOI: https://doi.org/10.1002/anie.202002665

2020-01-01

Abstract:Single-atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang-eave structure decorated with isolated single-atom iron sites via a silica-mediated MOF-templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state-of-the-art Pt/C catalyst and superior to most precious-metal-free catalysts reported to date. This activity originates from its edge-rich structure, having more three-phase boundaries with enhanced mass transport of reactants to accessible single-atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.
Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

Jun Liu,Zhou Peng Li,Bin Hong Liu

DOI: https://doi.org/10.1016/j.jallcom.2023.169166

IF: 6.2

2023-01-01

Journal of Alloys and Compounds

Abstract:We report our facile and efficient approach for synthesizing Co-Fe alloy based oxygen reduction reaction (ORR) catalysts, in which alloy nanoparticles are encapsulated in nitrogen-doped carbon nanostructures. The catalysts with high hierarchical porosities are fabricated at an appropriate temperature of 775 degrees C without a further acid leaching treatment after pyrolysis due to the use of ZnO nanoparticles as auto -removable templates. Co/Fe atomic ratio is found to greatly influence the ORR catalytic activity. The catalyst with Co/Fe = 1 exhibits the best catalytic performance by showing an ORR onset potential of 0.99 V and a half-wave potential of 0.87 V (vs. RHE) in 0.1 M KOH, as well as 0.98 V and 0.83 V (vs. RHE) in 0.5 M H2SO4, better than or approaching the performance presented by a commercial 28.6 wt% Pt/C catalyst. The Zn-air battery using the synthesized CoFe@N-C catalyst delivers a higher power density at ambient conditions by air-breathing than the one using the 28.6 wt% Pt/C catalyst. Relatively higher atomic concentrations of both Fe and Co as well as more graphitic nitrogen in the surface of CoFe@N-C detected by X-ray photoelectron spectroscopy (XPS) may account for its excellent ORR catalytic activities both in alkaline and acidic en-vironments.
Simple-Cubic Carbon Frameworks with Atomically Dispersed Iron Dopants toward High-Efficiency Oxygen Reduction

Biwei Wang,Xinxia Wang,Jinxiang Zou,Yancui Yan,Songhai Xie,Guangzhi Hu,Yanguang Li,Angang Dong

DOI: https://doi.org/10.1021/acs.nanolett.7b00004

2017-03-08

Abstract:Iron and nitrogen codoped carbons (Fe-N-C) have attracted increasingly greater attention as electrocatalysts for oxygen reduction reaction (ORR). Although challenging, the synthesis of Fe-N-C catalysts with highly dispersed and fully exposed active sites is of critical importance for improving the ORR activity. Here, we report a new type of graphitic Fe-N-C catalysts featuring numerous Fe single atoms anchored on a three-dimensional simple-cubic carbon framework. The Fe-N-C catalyst, derived from self-assembled Fe3O4 nanocube superlattices, was prepared by in situ ligand carbonization followed by acid etching and ammonia activation. Benefiting from its homogeneously dispersed and fully accessible active sites, highly graphitic nature, and enhanced mass transport, our Fe-N-C catalyst outperformed Pt/C and many previously reported Fe-N-C catalysts for ORR. Furthermore, when used for constructing the cathode for zinc-air batteries, our Fe-N-C catalyst exhibited current and power densities comparable to those of the state-of-the-art Pt/C catalyst.
Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework

Zhengping Zhang,Junting Sun,Feng Wang,Liming Dai

DOI: https://doi.org/10.1002/anie.201804958

2018-06-19

Angewandte Chemie International Edition

Abstract:Single Fe atoms dispersed on hierarchically structured porous carbon (SA-Fe-HPC) frameworks are prepared by pyrolysis of unsubstituted phthalocyanine/iron phthalocyanine complexes confined within micropores of the porous carbon support. The single-atom Fe catalysts have a well-defined atomic dispersion of Fe atoms coordinated by N ligands on the 3D hierarchically porous carbon support. These SA-Fe-HPC catalysts are comparable to the commercial Pt/C electrode even in acidic electrolytes for oxygen reduction reaction (ORR) in terms of the ORR activity (E1/2 =0.81 V), but have better long-term electrochemical stability (7 mV negative shift after 3000 potential cycles) and fuel selectivity. In alkaline media, the SA-Fe-HPC catalysts outperform the commercial Pt/C electrode in ORR activity (E1/2 =0.89 V), fuel selectivity, and long-term stability (1 mV negative shift after 3000 potential cycles). Thus, these nSA-Fe-HPCs are promising non-platinum-group metal ORR catalysts for fuel-cell technologies.

chemistry, multidisciplinary
Boosting the activity of non-platinum group metal electrocatalyst for the reduction of oxygen via dual-ligated atomically dispersed precursors immobilized on carbon supports

Yu Zhou,Talha Al-Zoubi,Yanling Ma,Haw-Wen Hsiao,Cheng Zhang,Chengjun Sun,Jian-Min Zuo,Hong Yang

DOI: https://doi.org/10.1016/j.nanoen.2021.106547

IF: 17.6

2021-12-01

Nano Energy

Abstract:This paper describes the use of both atomically dispersed precursors (ADPs) and conductive carbon dispersion towards the synthesis of iron-based single atom electrocatalysts for the oxygen reduction reaction (ORR). For non-platinum group metal (non-PGM) catalysts, single iron, cobalt or manganese atoms coordinated with nitrogen are the most active structures towards the ORR. Achieving a high density of active sites made of single atoms is still challenging, requiring careful controls of pyrolysis to reduce the sintering of metal active sites. Herewith, we present a new strategy to synthesize iron-based single atom ORR electrocatalysts using a two-pronged approach. We first designed a dual-ligated metal organic framework (MOF) precursor. This MOF was then immobilized onto Ketjen black carbon that serves as a conductive dispersion medium for creating the highly dispersed single atom sites. We demonstrate a near complete dispersion of the iron sites without obvious formation of nanoparticles. The activity of the resulting electrocatalyst exhibited an onset potential of 0.96 V and a half-wave potential of 0.84 V vs. reversible hydrogen electrode (RHE).

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Iron Single Atoms Anchored on Nitrogen-Doped Carbon Matrix/Nanotube Hybrid Supports for Excellent Oxygen Reduction Properties

Yining Jia,Chunjing Shi,Wei Zhang,Wei Xia,Ming Hu,Rong Huang,Ruijuan Qi

DOI: https://doi.org/10.3390/nano12091593

IF: 5.3

2022-05-07

Nanomaterials

Abstract:Single-atom non-precious metal oxygen reduction reaction (ORR) catalysts have attracted much attention due to their low cost, high selectivity, and high activity. Herein, we successfully prepared iron single atoms anchored on nitrogen-doped carbon matrix/nanotube hybrid supports (FeSA-NC/CNTs) by the pyrolysis of Fe-doped zeolitic imidazolate frameworks. The nitrogen-doped carbon matrix/carbon nanotube hybrid supports exhibit a specific surface area of 1626.814 m2 g−1, which may facilitate electron transfer and oxygen mass transport within the catalyst and be beneficial to ORR performance. Further electrochemical results revealed that our FeSA-NC/CNTs catalyst exhibited excellent ORR activity (half-wave potential: 0.86 V; kinetic current density: 39.3 mA cm−2 at 0.8 V), superior to that of commercial Pt/C catalyst (half-wave potential: 0.846 V; kinetic current density: 14.4 mA cm−2 at 0.8 V). It also has a great stability, which makes it possible to be a valuable non-noble metal electrode material that may replace the latest commercial Pt/C catalyst in the future.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Large-scale Synthesis of N-doped Carbon Capsules Supporting Atomically Dispersed Iron for Efficient Oxygen Reduction Reaction Electrocatalysis

Hui Yang,Yanfang Liu,Xiaolu Liu,Xiangke Wang,He Tian,Geoffrey I. N. Waterhouse,Paul E. Kruger,Shane G. Telfer,Shengqian Ma

DOI: https://doi.org/10.1016/j.esci.2022.02.005

2022-01-01

eScience

Abstract:The large-scale synthesis of platinum-free electrocatalysts for the oxygen reduction reaction (ORR) remains a grand challenge. We report the large-scale production of stable and active ORR electrocatalysts based on iron, an earth-abundant element. A core-shell zeolitic imidazolate framework-tannic acid coordination polymer composite (ZIF-8@K-TA) was utilized as the catalyst precursor, which was transformed into iron atoms dispersed in hollow porous nitrogen-doped carbon capsules (H-Fe-Nx-C) through ion exchange and pyrolysis. H-Fe-Nx-C features site-isolated single-atom iron centers coordinated to nitrogen in graphitic layers, high levels of nitrogen doping, and high permeability to incoming gases. Benefiting from these characteristics, H-Fe-Nx-C demonstrated efficient electrocatalytic activity (E1/2 1/4 0.92 V, vs. RHE) and stability towards the ORR in both alkaline and acidic media. In ORR performance, it surpassed the majority of recently reported Fe-N-C catalysts and the standard Pt/C catalyst. In addition, H-Fe-Nx-C showed outstanding tolerance to methanol.
Molecular Architectures of Iron Complexes for Oxygen Reduction Catalysis-Activity Enhancement by Hydroxide Ions Coupling.

Poe Ei Phyu Win,Jiahui Yang,Shuwang Ning,Xiang Huang,Gengtao Fu,Qiming Sun,Xing - Hua Xia,Jiong Wang

DOI: https://doi.org/10.1073/pnas.2316553121

2024-01-01

Abstract:Developing cost-effective and high-performance electrocatalysts for oxygen reduction reaction (ORR) is critical for clean energy generation. Here, we propose an approach to the synthesis of iron phthalocyanine nanotubes (FePc NTs) as a highly active and selective electrocatalyst for ORR. The performance is significantly superior to FePc in randomly aggregated and molecularly dispersed states, as well as the commercial Pt/C catalyst. When FePc NTs are anchored on graphene, the resulting architecture shifts the ORR potentials above the redox potentials of Fe2+/3+ sites. This does not obey the redox-mediated mechanism operative on conventional FePc with a Fe2+-N moiety serving as the active sites. Pourbaix analysis shows that the redox of Fe2+/3+ sites couples with HO- ions transfer, forming a HO-Fe3+-N moiety serving as the ORR active sites under the turnover condition. The chemisorption of ORR intermediates is appropriately weakened on the HO-Fe3+-N moiety compared to the Fe2+-N state and thus is intrinsically more ORR active.
Single-Atom Iron Catalyst Based on Functionalized Mesophase Pitch Exhibiting Efficient Oxygen Reduction Reaction Activity

Xianrui Gu,Meng Wang,Hongpeng Peng,Qian Peng,Wei Wang,Houpeng Wang,Junjun Shi,Xuetao Qin,Zhijian Da,Wenhong Yang,Yuchao Wu,Ding Ma,Houliang Dai

DOI: https://doi.org/10.3390/catal12121608

IF: 3.9

2022-12-09

Catalysts

Abstract:Designing highly efficient and low-cost electrocatalysts is of great importance in the fields of energy conversion and storage. We report on the facile synthesis of a single atom (SA) iron catalyst via the pyrolysis of a functionalized mesophase pitch. Monomers of naphthalene and indole underwent polymerization in the presence of iron chloride, which afterwards served as the pore-forming agent and iron source for the resulting catalyst. The SA-Fe@NC catalyst has a well-defined atomic dispersion of iron atoms coordinated by N-ligands in the porous carbon matrix, exhibiting excellent oxygen reduction reaction (ORR) activity (E1/2 = 0.89 V) that outperforms the commercial Pt/C catalyst (E1/2 = 0.84 V). Moreover, it shows better long-term stability than the Pt/C catalyst in alkaline media. This facile strategy could be employed in versatile fossil feedstock and develop promising non-platinum group metal ORR catalysts for fuel cell technologies.

chemistry, physical
Single Atom Catalysts: Designed Iron Single Atom Catalysts for Highly Efficient Oxygen Reduction Reaction in Alkaline and Acid Media (Adv. Mater. Interfaces 8/2021)

Shiyong Zhao,Lianji Zhang,Bernt Johannessen,Martin Saunders,Chang Liu,Shi‐Ze Yang,San Ping Jiang

DOI: https://doi.org/10.1002/admi.202170044

IF: 5.4

2021-04-01

Advanced Materials Interfaces

Abstract:In article number <a href="https://doi.org/10.1002/admi.202001788">2001788</a>, Chang Liu, San Ping Jiang, and co‐workers demonstrate a well‐characterized and scalable method to synthesize atomically dispersed iron atoms coordinated with nitrogen on graphene interface with high atomic loading (≈4.6 wt%) through a pyrolysis process. This work demonstrates an efficient design pathway for active and stable single atom catalysts for high‐performance and promisingly practical oxygen reduction reaction (ORR) application. 

materials science, multidisciplinary,chemistry
Asymmetric Coordination Regulating D‐orbital Spin‐electron Filling in Single‐atom Iron Catalyst for Efficient Oxygen Reduction

Yizhe Li,Hao Sun,Longtao Ren,Kai Sun,Liyao Gao,Xiangrong Jin,Qingzhen Xu,Wen Liu,Xiaoming Sun

DOI: https://doi.org/10.1002/anie.202405334

2024-05-10

Angewandte Chemie International Edition

Abstract:The single-atom Fe-N-C catalyst has shown great promise for the oxygen reduction reaction (ORR), yet the intrinsic activity is not satisfactory. There is a pressing need to gain a deeper understanding of the charge configuration of the Fe-N-C catalyst and to develop rational modulation strategies. Herein, we have prepared a single-atom Fe catalyst with the co-coordination of N and O (denoted as Fe-N/O-C) and adjacent defect, proposing a strategy to optimize the d-orbital spin-electron filling of Fe sites by fine-tuning the first coordination shell. The Fe-N/O-C exhibits significantly better ORR activity compared to its Fe-N-C counterpart and commercial Pt/C, with a much more positive half-wave potential (0.927 V) and higher kinetic current density. Moreover, using the Fe-N/O-C catalyst, the Zn-air battery and proton exchange membrane fuel cell achieve peak power densities of up to 490 and 1179 mW cm-2, respectively. Theoretical studies and in situ electrochemical Raman spectroscopy reveal that Fe-N/O-C undergoes charge redistribution and negative shifting of the d-band center compared to Fe-N-C, thus optimizing the adsorption free energy of ORR intermediates. This work demonstrates the feasibility of introducing an asymmetric first coordination shell for single-atom catalysts and provides a new optimization direction for their practical application.

chemistry, multidisciplinary
Highly Active and Stable Single Iron Site Con Fi Ned in Graphene Nanosheets for Oxygen Reduction Reaction

Xiaoqi Chen,Liang Yu,Suheng Wang,Dehui Deng,Xinhe Bao

DOI: https://doi.org/10.1016/j.nanoen.2016.12.056

IF: 17.6

2016-01-01

Nano Energy

Abstract:Exploring high performance non-precious metal catalysts to substitute Pt for oxygen reduction reaction (ORR) has stimulated wide research interest recently, but it remains a great challenge. Herein, we report a single iron site confined in graphene catalyst via 4N atoms, forming flat FeN4 structure in the matrix of graphene. The optimized catalyst shows a high ORR activity, almost coming up to the activity of commercial 40% Pt/C catalyst, but a significantly higher stability and tolerance to SOx, NOx and methanol with respect to 40% Pt/C. This well-defined structure provides an ideal model to study the catalytic origin of iron-based catalysts. DFT calculations indicate that the high ORR activity origins from highly dispersed and high-density coordinatively unsaturated Fe centers, and the excellent stability origins from the unique confinement of the graphene matrix via 4N atoms. This reaction can proceed easily to H2O via a four electron transfer path way on the single iron site, which is further confirmed by the experiment. This experimental and theoretical study provides a further insight into the nature of the Fe/N/C catalyst and also introduces a reference for designing high efficient catalysts in electrocatalysis.
Simultaneously Engineering the Coordination Environment and Pore Architecture of Metal–Organic Framework‐Derived Single‐Atomic Iron Catalysts for Ultraefficient Oxygen Reduction

Feng Liu,Lei Shi,Shaofeng Song,Kai Ge,Xiaopeng Zhang,Yingchun Guo,Dong Liu

DOI: https://doi.org/10.1002/smll.202102425

IF: 13.3

2021-09-08

Small

Abstract:Designing highly efficient and durable electrocatalysts that accelerate sluggish oxygen reduction reaction kinetics for fuel cells and metal–air batteries are highly desirable but challenging. Herein, a facile yet robust strategy is reported to rationally design single iron active centers synergized with local S atoms in metal–organic frameworks derived from hierarchically porous carbon nanorods (Fe/N,S-HC). The cooperative trithiocyanuric acid-based coating not only introduces S atoms that regulate the coordination environment of the active centers, but also facilitates the formation of a hierarchically porous structure. Benefiting from electronic modulation and architectural functionality, Fe/N,S-HC catalyst shows markedly enhanced ORR performance with a half-wave potential (E1/2) of 0.912 V and satisfactory long-term durability in alkaline medium, outperforming those of commercial Pt/C. Impressively, Fe/N,S-HC-based Zn–air battery also presents outstanding battery performance and long-term stability. Both electrochemical experimental and density functional theoretical (DFT) calculated results suggest that the FeN4 sites tailored with local S atoms are favorable for the adsorption/desorption of oxygen intermediate, resulting in lower activation energy barrier and ultraefficient oxygen reduction catalytic activity. This work provides an atomic-level combined with porous morphological-level insights into oxygen reduction catalytic property, promoting rational design and development of novel highly efficient single-atom catalysts for the renewable energy applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Enhanced oxygen reduction with single-atomic-site iron catalysts for a zinc-air battery and hydrogen-air fuel cell

Yuanjun Chen,Shufang Ji,Shu Zhao,Wenxing Chen,Juncai Dong,Weng-Chon Cheong,Rongan Shen,Xiaodong Wen,Lirong Zheng,Alexandre I. Rykov,Shichang Cai,Haolin Tang,Zhongbin Zhuang,Chen Chen,Qing Peng,Dingsheng Wang,Yadong Li

DOI: https://doi.org/10.1038/s41467-018-07850-2

IF: 16.6

2018-12-01

Nature Communications

Abstract:Abstract Efficient, durable and inexpensive electrocatalysts that accelerate sluggish oxygen reduction reaction kinetics and achieve high-performance are highly desirable. Here we develop a strategy to fabricate a catalyst comprised of single iron atomic sites supported on a nitrogen, phosphorus and sulfur co-doped hollow carbon polyhedron from a metal-organic framework@polymer composite. The polymer-based coating facilitates the construction of a hollow structure via the Kirkendall effect and electronic modulation of an active metal center by long-range interaction with sulfur and phosphorus. Benefiting from structure functionalities and electronic control of a single-atom iron active center, the catalyst shows a remarkable performance with enhanced kinetics and activity for oxygen reduction in both alkaline and acid media. Moreover, the catalyst shows promise for substitution of expensive platinum to drive the cathodic oxygen reduction reaction in zinc-air batteries and hydrogen-air fuel cells.

multidisciplinary sciences
Xanthine-derived 3D porous iron–nitrogen-carbon catalysts for enhanced oxygen reduction reaction

Baobing Huang,Qianyi Liu,Yaxiang Li,Yixin Peng,Zailai Xie

DOI: https://doi.org/10.1016/j.fuel.2024.131970

IF: 7.4

2024-05-24

Fuel

Abstract:Iron-nitrogen-carbon (Fe-N-C) catalyst has emerged as highly promising contender for oxygen reduction reaction (ORR), yet challenges such as limited active site accessibility and intricate synthesis procedures impede their commercialization as a replacement for the benchmark Pt/C catalyst. Herein, we present an innovative approach to in situ fabricate a unique iron and nitrogen co-doped 3D porous carbon material. The material is synthesized through a straightforward one-step pyrolysis of xanthine, oxidized carbon nanotubes and iron nitrate nonahydrate mixture. During the high temperature pyrolysis, the nucleobase xanthine undergoes gradually transformation into an efficient N-doped graphene-like material. Simultaneously, it assembles with carbon nanotubes (CNTs), resulting in the formation of a unique 3D graphene-CNTs composite structure composed of graphene and CNTs. This exceptional 3D porous structure serves as an excellent scaffold, ensuring firm anchoring, uniform dispersion, and optimal exposure of numerous FeN x active sites. Leveraging this well-engineered framework, the optimized Fe-N-C catalyst (NC/CNT/Fe 0.04 ) shows excellent ORR performance with an onset potential of 1.03 V vs. RHE, a half-wave potential of 0.87 V vs. RHE, and a diffusion-limited current density of −5.59 mA cm −2 , even better than those of the commercial Pt/C catalyst. This work provides valuable insights into the design of efficient electrocatalysts with 3D channel.

energy & fuels,engineering, chemical
Suppressing Thermal Migration by Fine-Tuned Metal-Support Interaction of Iron Single-Atom Catalyst for Efficient ORR

Jingwen Wang,Chuangang Hu,Liguang Wang,Yang Yuan,Kai Zhu,Qing Zhang,Lin Yang,Jun Lu,Zhengyu Bai

DOI: https://doi.org/10.1002/adfm.202304277

IF: 19

2023-01-01

Advanced Functional Materials

Abstract:Atomically dispersed iron-nitrogen-carbon (Fe-N-C) catalysts have sparked great interest by virtue of the highly active isolated FeN4 sites. The catalysts with pyrolysis treatment usually induce inevitable FeN4 sites agglomeration, leading to fast degradation in catalytic activity. Herein, a pre-coordinated protection strategy is proposed to eliminate the aggregation of Fe atoms by suppressing the thermal migration during the pyrolysis process. To this end, the S atom is introduced into the graphitic support by enhancing the metal-support interaction. The proposed atomic structure is revealed by multiple advanced characterizations including Fe Mossbauer spectroscopy, X-ray absorption spectroscopy, and theoretical calculations. By employing S atom into the structure, the center atom Fe is oxidized to a higher valence, improving the bonding energy with the graphitic support, which accordingly endows catalyst anti-sintering capacity and improved catalytic activity. Compared to commercial Pt/C and the reported catalyst with secondary pyrolysis, the proposed catalysts exhibit enhanced ORR activity in alkaline media (E-1/2 = 0.91 V). This work provides a new avenue toward optimizing and improving ORR performance of atomically dispersed Fe catalysts.
Polyhedral Carbon Anchored on Carbon Nanosheet with Abundant Atomic Fe‐N x Moieties for Oxygen Reduction

Dong Liu,Chenxi Huyan,Yuanyuan Zhao,Terence Xiaoteng Liu,Ding Wang,Jining Sun,Sheng Dai,Fei Chen,Ben Bin Xu

DOI: https://doi.org/10.1002/admi.202200276

IF: 5.4

2022-04-07

Advanced Materials Interfaces

Abstract:A novel carbon‐based single‐atom iron electrocatalyst with nitrogen coordination (CSAIN) catalyst strategy is developed by pyrolyzing a precursor of metal–organic framework and conductive polymer hybrid. The unique structure endows CSAIN with expedited electron transfer and mass transport, as well as a large exposed surface to host atomically dispersed iron active sites, thus achieving unique enhancement on oxygen reduction activity in acidic media.Carbon‐based single‐atom iron electrocatalysts with nitrogen coordination (CSAIN) have recently shown enormous promise to replace the costly Pt for boosting the cathodic oxygen reduction reaction (ORR) in fuel cells. However, there remains a great challenge to achieve highly efficient CSAIN catalysts for the ORR in acidic electrolytes. Herein, a novel CSAIN catalyst is synthesized by pyrolyzing a precursor mixture consisting of metal–organic framework and conductive polymer hybrid. After pyrolysis at a high temperature, the CSAIN with a structure of carbon nanosheet supported polyhedral carbon is achieved, where the unique structure endows CSAIN with expediting electron transfer and mass transport, as well as largely exposed surface to host atomically dispersed iron active sites. As a result, the optimal CSAIN catalyst shows a high ORR activity with its half‐wave potential of 0.77 V (vs RHE) and a Tafel slope of 74.1 mV dec–1, which are comparable to that of commercial Pt/C catalyst (0.80 V and 81.9 mV dec–1).

materials science, multidisciplinary,chemistry
Isolated Single Iron Atoms Anchored on N‐Doped Porous Carbon As an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Yuanjun Chen,Shufang Ji,Yanggang Wang,Juncai Dong,Wenxing Chen,Zhi Li,Rongan Shen,Lirong Zheng,Zhongbin Zhuang,Dingsheng Wang,Yadong Li

DOI: https://doi.org/10.1002/anie.201702473

2017-01-01

Angewandte Chemie International Edition

Abstract:AbstractThe development of low‐cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single‐atom Fe/N‐doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half‐wave potential (E1/2) of 0.900 V, which outperformed commercial Pt/C and most non‐precious‐metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk) of 37.83 mV cm−2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.
Unveiling the high-activity origin of single-atom iron catalysts for oxygen reduction reaction

Liu Yang,Daojian Cheng,Haoxiang Xu,Xiaofei Zeng,Xin Wan,Jianglan Shui,Zhonghua Xiang,Dapeng Cao

DOI: https://doi.org/10.1073/pnas.1800771115

IF: 11.1

2018-06-11

Proceedings of the National Academy of Sciences

Abstract:Significance We propose a surfactant-assisted method to synthesize single-atom iron catalysts (SA-Fe/NG) supported on nitrogen-doped graphitic carbons, and experimentally demonstrated that the SA-Fe/NG catalyst possesses extremely outstanding catalytic activities for oxygen reduction reaction (ORR) in both acidic and alkaline media. Impressively, both the SA-Fe/NG-based acidic proton exchange membrane fuel cell and Zn-air battery show excellent performance. Combining experimental results and density-functional calculations, we reveal that the origin of high-ORR activity of SA-Fe/NG is from the Fe-pyrrolic-N 4 active species. The universal surfactant-assisted method can be easily extended to synthesis of other single-atom catalysts, and unveiling the origin of high-ORR activity of SA-Fe/NG will open an approach for developing other heterogeneous catalysts.

Carbon-based Catalysts by Structural Manipulation with Iron for Oxygen Reduction Reaction

Contracted Fe-N5-C11 Sites in Single-Atom Catalysts Boosting Catalytic Performance for Oxygen Reduction Reaction.

Single-Atom Iron Catalysts on Overhang-Eave Carbon Cages for High-Performance Oxygen Reduction Reaction

Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

Simple-Cubic Carbon Frameworks with Atomically Dispersed Iron Dopants toward High-Efficiency Oxygen Reduction

Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework

Boosting the activity of non-platinum group metal electrocatalyst for the reduction of oxygen via dual-ligated atomically dispersed precursors immobilized on carbon supports

Iron Single Atoms Anchored on Nitrogen-Doped Carbon Matrix/Nanotube Hybrid Supports for Excellent Oxygen Reduction Properties

Large-scale Synthesis of N-doped Carbon Capsules Supporting Atomically Dispersed Iron for Efficient Oxygen Reduction Reaction Electrocatalysis

Molecular Architectures of Iron Complexes for Oxygen Reduction Catalysis-Activity Enhancement by Hydroxide Ions Coupling.

Single-Atom Iron Catalyst Based on Functionalized Mesophase Pitch Exhibiting Efficient Oxygen Reduction Reaction Activity

Single Atom Catalysts: Designed Iron Single Atom Catalysts for Highly Efficient Oxygen Reduction Reaction in Alkaline and Acid Media (Adv. Mater. Interfaces 8/2021)

Asymmetric Coordination Regulating D‐orbital Spin‐electron Filling in Single‐atom Iron Catalyst for Efficient Oxygen Reduction

Highly Active and Stable Single Iron Site Con Fi Ned in Graphene Nanosheets for Oxygen Reduction Reaction

Simultaneously Engineering the Coordination Environment and Pore Architecture of Metal–Organic Framework‐Derived Single‐Atomic Iron Catalysts for Ultraefficient Oxygen Reduction

Enhanced oxygen reduction with single-atomic-site iron catalysts for a zinc-air battery and hydrogen-air fuel cell

Xanthine-derived 3D porous iron–nitrogen-carbon catalysts for enhanced oxygen reduction reaction

Suppressing Thermal Migration by Fine-Tuned Metal-Support Interaction of Iron Single-Atom Catalyst for Efficient ORR

Polyhedral Carbon Anchored on Carbon Nanosheet with Abundant Atomic Fe‐N x Moieties for Oxygen Reduction

Isolated Single Iron Atoms Anchored on N‐Doped Porous Carbon As an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Unveiling the high-activity origin of single-atom iron catalysts for oxygen reduction reaction