Abstract:Palladium (Pd), a well-known noble metal for its exceptional physical and chemical properties, finds widespread applications in sectors including automotive, hydrogen purification, dentistry, coinage, and jewelry. The growing demand for Pd has led to resource scarcity. This feature necessitated upon the economically and environmentally viable means for the reclamation of the precious metal ions from secondary sources. This article delves into the Pd adsorptive-desorption trends associated with the triethylenetetramine cross-linked chitosan (CH-TETA) derivative in moderately complex solutions. The effect of moderate solution chemistry complexity, incorporating ammonium hydroxide (NH 4 OH) and ethylenediaminetetraacetic acid (EDTA), within the synthetic electroless plating (ELP) solutions was investigated. Batch adsorption experiments were conducted through a variation of process parameters namely solution pH, CH-TETA dosage, adsorption duration, initial Pd concentration, and temperature. CH-TETA demonstrates an impressive Pd adsorption capacity ranging from 43.53 to 117.08 mg g−1 and is correspondingly accompanied by the metal removal efficiency range of 87.05% to 39.03%. Such promising performance has been ascertained for an initial Pd constitution of 50 to 300 mgL−1. Despite constituting other additives in the adsorbate system, utilizing simple acidic and basic eluents, the CH-TETA derivative exhibited a reasonable recovery efficacy of 39.68%. Thereafter, recovery of Pd can be further enhanced into two approaches. In these, the first refers to the utilization of various other methods such as thermal, electrochemical, ultrasound, and microwave-assisted regeneration from spent adsorbents. Secondly, a pre-treatment method can be adopted to remove the additives prior to the adsorption process. In summary, the recovery of precious metal ions from the spent adsorbents has been a challenging task. Based on the discussion, further improvements based on the findings of this article are possible by targeting relevant research methodologies in resin chemistry and regeneration methods.

Recovery of ultra-trace palladium using chitosan and its sulphur-containing derivative in HCl medium

Selective chelating precipitation of palladium metal from electroplating wastewater using chitosan and its derivative

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Synthesis of Carbon Disulfide Modified Chitosan Resin and Its Adsorption Properties for Palladium(ⅱ) in Wastewater

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Preparation of chitosan resin by two-step crosslinking method and its adsorption for palladium in wastewater

Fabrication of Kaolin Loaded Chitosan Hybrid Nanofibers for Recovery of Precious Palladium Cations from Aqueous Solution

Adsorption performance of thiourea-modified chitosan microspheres to Pt4+ and Pd4+ I. adsorption equilibrium and kinetics

Evaluation of a triethylenetetramine-chitosan derivative for the removal of palladium ion from an intricate adsorbate system

Recovery of Pd(II) in chloride solutions by solvent extraction with new vinyl sulfide ploymer extractants

Adsorption performance of thiourea-modified chitosan microspheres to Pt4+ and Pd2+ II. Adsorption thermodynamics and desorption

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Adsorption of Platinum(iv) and Palladium(ii) from Aqueous Solution by Magnetic Cross-Linking Chitosan Nanoparticles Modified with Ethylenediamine.

Silica-supported thiourea resin for efficient recovery of Pd(II): Batch, column and mechanism study

Spherical Cu2O-Fe3O4@chitosan Bifunctional Catalyst for Coupled Cr-organic Complex Oxidation and Cr(VI) Capture-Reduction

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Aliquat-336 impregnated chitosan microspheres for Au(I) extraction from thiosulfate solution: Preparation, adsorption mechanism, and application

Recovery of Pd from electroless plating solution using glyoxal cross-linked chitosan derivatives and its valorization as efficient heterogeneous catalyst for multifarious applications

Biosorption of palladium(II) from aqueous solution by grafting chitosan on persimmon tannin extract

Highly Selective Adsorption and Recovery of Palladium from Spent Catalyst Wastewater by 1,4,7,10-Tetraazacyclododecane-Modified Mesoporous Silica

Selective capture of palladium from acid wastewater by thiazole-modified activated carbon: Performance and mechanism