Abstract:Phase change material (PCM) microcapsules are gaining increasing attention because it can overcome the shortage of PCM macrocapsules and increase the heat transfer area, while the pore-scale thermal performance of the PCM microcapsule packed-bed systems, as well as the influence of packing methods and microcapsule sizes on thermal storage, is still poorly understood. This paper introduces various spherical PCM microcapsule pack models, including single-layered, diameter-changed two-layered, and three-layered packing models, to investigate the charging process at pore scale. The indices of thermal storage properties such as charging time, temperature distribution, phase change fraction, pressure drop and thermocline degradation are studied with the finite element method. In the single-layered thermal storage system, the results show that the charging process can be improved by reducing the capsule size and using cross-packing methods. When the capsule size is reduced from 2 to 0.5 mm with cross packing, the charging time can be shortened by 72.97%, but remarkable pressure drop is created. The results indicate that the overall thermal storage performance of multi-layered packed-bed systems is better than that of single-layered packed-bed systems. The charging time of the diameter-changed two-layered and three-layered thermal storage systems can be reduced up to 16.21% and 24.32%, respectively, compared to the single-layered in-line pack with a d = 2 mm. The filling sequence plays a key role in multi-layered thermal systems. A packed-bed system with a diameter decreasing along the heat transfer fluid (HTF) flow direction has a better capacity to reduce thermocline degradation than other packed-bed systems.

Experimental and numerical study on the performance of a new high-temperature packed-bed thermal energy storage system with macroencapsulation of molten salt phase change material

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

A New Model of Phase Change Process for Thermal Energy Storage

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental and numerical study of cylindrical encapsulated phase change material in packed bed thermal energy storage with expansion and shrinkage effects

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material

Pore-scale numerical investigation on the thermal storage properties of packed-bed systems with phase change material microcapsules

An investigation on the thermal energy storage in an enclosure packed with micro-encapsulated phase change material

An Experimental and Numerical Investigation of Constrained Melting Heat Transfer of a Phase Change Material in a Circumferentially Finned Spherical Capsule for Thermal Energy Storage

Experimental study on the performance of packed-bed latent thermal energy storage system employing spherical capsules with hollow channels

Dynamic Performances of Solar Heat Storage System with Packed Bed Using Myristic Acid As Phase Change Material

Experimental Study on Thermal Performance of a Mobilized Thermal Energy Storage System: A Case Study of Hydrated Salt Latent Heat Storage

Experiments on Comparative Performance of Water Thermocline Storage Tank with and Without Encapsulated Paraffin Wax Packed Bed

An experimental study of melting behavior of the phase change material in cylindrical capsules for thermal energy storage

Performance investigation on the cascaded packed bed thermal energy storage system with encapsulated nano-enhanced phase change materials for high-temperature applications

Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger

Experimental investigation on high energy-density and power-density hydrated salt-based thermal energy storage

Microencapsulation of Molten Salt in Titanium Shell for High‐Temperature Latent Functional Thermal Fluid