Abstract:Under the background of "carbon peaking and carbon neutrality" goals, the proton exchange membrane fuel cell (PEMFC) vehicle attracts extensive attention due to its high energy conversion efficiency, long range and zero emission. However, the challenge of cold start in low temperature environments becomes a large obstacle to its commercialization and application. The current cold start performance of typical commercial fuel cell vehicles cannot reach the optimal target yet. Several problems such as the lack of complete mechanical systems of water transport and phase change and the absence of simulation models for on-board fuel cells at system level still exist. Thus, researchers have carried out a great number of experiments and simulations to study the mechanism of degradation, water transport, phase change and heat transfer as well as start-up strategy optimization of PEMFC cold start. By measuring the output performance, it is found that the degradation of performance is attributed to the formation of ice which covers the reaction active region, blocks the gas channel and increases the electrical contact resistance. Researchers also believe that the reduction of durability is owing to the volume change of water-ice phase change which leads to the damage of the structure by characterizing the microstructure of the fuel cell. With the help of transparent cells, neutron imaging and simulations of multiphase PEMFC models, the distribution, transport and phase change of water and ice during cold start have been studied. The results indicate that the electrochemical product water first saturates the PEM and the catalyst layer (CL) as membrane water. Then the water remains liquid in the form of supercooled water at low temperatures, and finally flows out of the cell or freezes suddenly. By studying the heat transfer process both in plane and through plane during cold start, researchers find that at central regions of the single cell and in the middle part of the stack, the temperature rises fastest. They also find that the irreversible reaction heat generated by cathodic oxygen reduction reaction (ORR) is the main source of heat generation. Based on the cold start mechanism of PEMFCs, researchers have developed various self-start and auxiliary start strategies. The start-up mode and control strategies have been optimized. The internal structure and materials of each part have been improved. And a series of auxiliary startup strategies such as gas purging, heater heating, reaction heating, gas heating as well as coolant heating have been proposed. A large number of simulations and experiments are carried out to verify the advantages of these strategies. Through these excellent cold start strategies, the commercialization and promotion process of PEMFC vehicles can be accelerated.

Comparison Between the Constant Dummy Load and Step Load Shut‐Down Strategy for PEMFCs

Study of the Two-Phase Dummy Load Shut-Down Strategy for Proton Exchange Membrane Fuel Cells

Impact of Dummy Load Shut-Down Strategy on Performance and Durability of Proton Exchange Membrane Fuel Cell Stack

Experimental Study of the Influence of Dynamic Load Cycle and Operating Parameters on the Durability of PEMFC

Investigating the Effect of Start-Up and Shut-Down Cycles on the Performance of the Proton Exchange Membrane Fuel Cell by Segmented Cell Technology

Effect of Gas Shutoff Sequences on the Degradation of Proton Exchange Membrane Fuel Cells with Dummy Load During Startup and Shutdown Cycles

Investigation of Dynamic Driving Cycle Effect on Performance Degradation and Micro-Structure Change of PEM Fuel Cell

Local resolved investigation of PEMFC performance degradation mechanism during dynamic driving cycle

Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test

Comparison of Degradation Behaviors for Open-Ended and Closed Proton Exchange Membrane Fuel Cells During Startup and Shutdown Cycles

Effect of driving cycle on the performance of PEM fuel cell and microstructure of membrane electrode assembly

Performance Degradation and Strategy Optimization of PEMFCs Under Sub-freezing Temperature

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

Investigation Of Three System Shut-Down Strategies Alongside Optimization Suggestion For Proton Exchange Membrane Fuel Cells Via In-Situ Measurements

Driving cycle test of single PEMFC operated under elevated temperature and low humidity

Investigation of Performance Degradation and Control Strategies of PEMFC under Three Typical Operating Conditions

An Effective PEMFC System Shutdown Purge Strategy for Improving the Purging Effect of Liquid Water and the Dehydration of Stack

Strategy Optimization of Proton Exchange Membrane Fuel Cell Cold Start

Study on Carbon Corrosion Induced Crack Propagation on Cathode Catalyst Layer in Polymer Electrolyte Membrane Fuel Cell under Startup-Shutdown Operating Condition

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Enhanced PEMFC Durability with Graphitized Carbon Black Cathode Catalyst Supports under Accelerated Stress Testing.