Abstract:Currently, there is great demand for automated assembly of equipment inside spacecraft module, which would require an assembly robot with small size, large workspace, high load capacity, and high flexibility. To meet this demand, a redundant seven-degree-of-freedom (7-DOF) assembly robot with three prismatic joints and four rotating joints is proposed in this study. First, a kinematic model of the assembly robot is established, and the positional forward kinematics are derived. Then, the positional inverse kinematic equations are derived by using the fixed joint method and the coordinate inverse transformation method for the characteristics of the robot with redundant degrees of freedom. The inverse solution optimization model of the assembly robot is designed based on genetic algorithm, and B-spline interpolation algorithm is used for joint trajectory planning. Next, NSGA-2 algorithm is used to construct the trajectory optimization model, and the time-pulsation multi-objective Pareto optimal frontier is obtained. Finally, the joint simulation model of mechatronics and the prototype experiment are established to verify the effectiveness of the optimization results. Analysis shows that the proposed assembly robot has better load-bearing capacity and dynamic characteristics than similar existing assembly robots. Furthermore, the segmented trajectory optimization strategy for the assembly robot using inverse solution optimization, interpolation algorithm, and NSGA-2 based multi-objective optimization gets each motion joint to realize the trajectory tracking function quickly and stably, and the trajectory tracking error is small enough to meet the requirements of end positioning accuracy.

MOTION PLANNING FOR 6-DOF ASSEMBLY PART POSITIONING AND ALIGNMENT ADJUSTMENT

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

A Novel Posture Alignment System for Aircraft Wing Assembly

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Motion Planning for Posture Alignment Machine Tool Oriented Fuselage Panel

Design and motion planning of a 7-DOF assembly robot with heavy load in spacecraft module

Kinematics, dynamics, and load distribution analysis of a 4-PPPS redundantly actuated parallel manipulator

Kinetostatic Modeling Of Redundantly Actuated Planar Compliant Parallel Mechanism

A new type of four supporting points parallel redundant action mechanism for attitude adjustment

Synergic Motion Trajectory Planning for Airplane Docking Based On6puru Parallel Mechanism

Development of a Novel 6-DOF Hybrid Serial-Parallel Mechanism for Pose Adjustment of Large-Volume Components

Motion planning analysis and simulation of a six D.O.F 3-PRPS parallel manipulator

Control of Automatic Assembly Platform for a Large Unit Based on Equivalent Parallel

The Design and Kinetostatic Modeling of 3PPR Planar Compliant Parallel Mechanism Based on Compliance Matrix Method.

Assembly Sequence Planning for Motion Planning

A 5-DOF redundantly actuated parallel mechanism for large tilting five-face machining

Design and Analysis of a 3-DOF Planar Flexure-based Parallel Mechanism with Large Motion Range

Workspace analysis and size optimization of planar 3-DOF redundantly actuated parallel mechanism

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Coordinated motion planning of the mobile redundant manipulator for processing large complex components

A 6-DOF compliant joints-based precision parallel positioner system driven by dual piezoelectric actuators