Abstract:During rover lunar exploration missions (such as China's “Chang'e”), rovers are required to move autonomously on the loose lunar soil. Control methods based on the rigidity hypothesis can hardly be expected to satisfy these requirements practically so wheel-soil interaction mechanics should be taken into account. The currently used integral model based on wheel-soil interaction mechanics, however, is complicated, and it cannot be directly applied to the design of a lunar rover's controller. This paper presents a new simplified method of determining the wheel-soil interaction of lunar rovers by introducing a normal stress factor and the ratio of the forward region to the rear region, based on an analysis of the integral model and lunar soil parameters. As an example, numerical analysis is performed for a lunar rover wheel with a width of 165 mm and a radius of 135 mm. Based on a slip ratio as high as 0.4 and an entrance angle that varies from 10° to 40°, the results show that the maximum errors of the model for the calculation of normal force and drawbar pull force are less than 2%, while the maximum error of resistance torque is approximately 5%. When designing a rover's controller, the relationship between the driving torque of wheel T and the drawbar pull of wheel FDP is T = FDPr according to the rigidity hypothesis, a relationship that contradicts the terramechanics model. The proposed simplified model, which is verified by experiments, provides an important basis for the design of a control algorithm for a lunar rover that takes into account lunar wheel-soil interaction mechanics.

Design and Analysis of a Compliant Variable-Diameter Mechanism Used in Variable-Diameter Wheels for Lunar Rover

Design of a Variable-Diameter Wheel with a Novel Distributed Compliant Mechanism

Development of a Novel Variable-Diameter Wheel

Mechanical Analysis and Performance Optimization for the Lunar Rover’s Vane-Telescopic Walking Wheel

Research on a New Analysis Method of Traction Performance for Variable-Diameter Wheels

Research on Climbing Performance of Lunar Rover's Driving Wheel and Analysis of Affecting Factors

A Mechanical Model for Deformable and Mesh Pattern Wheel of Lunar Roving Vehicle

Kinematic modeling and analysis of variable diameter wheeled lunar rover

Design of Wheel of Manned Lunar Rover and Research on Terramechanics Model for Wheel-terrain Interaction Based on Elastic Wheel

Prediction of Traction Performance of Lunar Rover's Driving Wheel on Slope Terrain

The Wheel End Closure Optimization of Two-Wheeled Lunar Rover

Influence analysis of rim radius on motion performance of lunar rover wheel

Mechanism Based Creative Design and Optimum of Wheeled Space Rover

Research on starting capacity of lunar rover in extreme environment

Analysis of Wheel-Soil Interaction of Rolling Wheels with Different Diameters on a Lunar Rover

Design and Analysis of a Lunar Crewed Vehicle with a Novel Versatile Compliant Suspension Mechanism

Mechanical Analysis and Measurement of Parameters of Wheel-Soil Interaction for A Lunar Rover

Mobility Performance Analysis of Lunar Rover with Center of Mass Varied Based on the Theory of Terramechanics

Configuration design and kinematic performance analysis of a parallel wheelset suspension for a multi-wheeled pressurized lunar rover

Motion-control-based analytical model for wheel-soil interaction mechanics of lunar rover

Optimum design of planetary wheel of lunar rover