Abstract:Functionally graded materials (FGMs) with continuously varied composition effectively reduce the mismatch at bonding surface between different constituents. As thermal protection structures, functionally graded panels (FGPs) eliminate the internal thermal stress concentration which arises from aerodynamic heating. The aeroelastic flutter bound-ary of an FGP is analyzed considering the structural geometric nonlinearity due to thermal post-buckling deflection. The effective FGM properties are calculated using the rule of mixture homogenization with the power law distribution assump-tion. The first-order shear deformable plate theory, von Karman strain-displacement relations and the first-order piston theory are adopted to formulate the nonlinear aeroelastic finite element equations of FGPs in supersonic flow according to the principle of virtual work. The numerical simulation results of thermal post-buckling response are obtained using the Newton-Raphson iterative method, and the mechanism of post-buckling deflection affected by the airflow is discussed. The panel flutter boundary is determined by analyzing the stability of post-buckling equilibriums. It is concluded that the symmetry of a ceramic-metal FGP is destroyed by through-the-thickness material distribution, and the panel tends to buckle to the metal side under in-plane thermal stresses. The position of maximum post-buckling deflection moves to the down-stream in the supersonic airflow, and the post-buckling deflection decreases with the increase of flow dy-namic pressure. The geometric nonlinearity increases the flutter critical dynamic pressure of post-buckled FGPs when the large post-buckling deflection is occurred at relative high temperature and low non-dimensional dynamic pressure flow. However, the geometric nonlinearity is not so important at high non-dimensional dynamic pressure flow because the post-buckling deflection is restrained to a small one by the supersonic airflow.

Nonlinear Flutter Response of Pre-Heated Functionally Graded Panels

The Influence of Initial Deflection on Nonlinear Flutter Response of Functionally Graded Plates

New Look at Nonlinear Aerodynamics in Analysis of Hypersonic Panel Flutter

Nonlinear Flutter Response of Heated Curved Composite Panels with Embedded Macrofiber Composite Actuators

AEROELASTIC FLUTTER OF POST-BUCKLED FUNCTIONALLY GRADED PANELS

3-D Laminated Model and Dynamic Response Analysis of FGM Panels in Thermal-acoustic Environments

Nonlinear Panel Flutter Analysis Based on an Improved Cfd/Csd Coupled Procedure

Nonlinear Aeroelastic Analysis of Heated Curved Panels in Supersonic Air Flow

Post-Buckling and Panel Flutter of Pre-Heated Functionally Graded Plates

Nonlinear Thermal Flutter Response of Two Dimensional Panels in Supersonic Flow

Investigation of Aerothermoelastic Behaviors of Functionally Graded Panels in Supersonic Flows

Nonlinear thermal flutter of heated curved panels in supersonic air flow

Proper Orthogonal Decomposition Method for Analysis of Nonlinear Panel Flutter with Thermal Effects in Supersonic Flow

Nonlinear electro-thermo-mechanical dynamic behaviors of a supersonic functionally graded piezoelectric plate with general boundary conditions

Nonlinear aeroelastic analysis and active flutter control of functionally graded piezoelectric material plate

Nonlinear Aeroelastic Panel Flutter Based on Proper Orthogonal Decomposition

Post-flutter Response of a Flexible Cantilever Plate in Low Subsonic Flows

Effect of elevated temperature on the flutter characteristics of FGM panel

Nonlinear flutter of composite laminated panels with local non-smooth friction boundaries

Flutter and Thermal Buckling Properties and Active Control of Functionally Graded Piezoelectric Material Plate in Supersonic Airflow

NONLINEAR THERMAL FLUTTER OF HEATED CURVED PANELS IN SUPERSONIC AIR FOW