Abstract:The investigation of jump cooling performance on turbine endwall independently causes its actual cooling effectiveness to deviate from the design values. In this paper, the endwall jump cooling structure with combustor-turbine interface cavity and combustor liners is modeled. Taking the realistic combustor-turbine interface features into account, the effect of jump coolant on turbine endwall film cooling and heat transfer characteristics is numerically studied. Under different endwall misalignment modes, the aerodynamic interaction mechanisms of realistic combustor outflow profile, jump coolant jet and cascade secondary flows at turbine endwall region are revealed. The modification effects of combustor-turbine interface features on jump cooling of the endwall are investigated. The results show that the combustor outflow severely ingests into the combustor-turbine interface cavity after flowing across several steps. Two branches of cavity vortex are subsequently generated in the middle-pitch region of cascade to affect the jump coolant jet. At low coolant blowing ratio, the attachment and separation sides of cavity vortex individually result in high and low cooling regions, while the horseshoe vortex leads to a large wedge-shaped cooling region. At z / C ax < 0, the backward step leads to a higher cooling effectiveness than forward step by 0.2. The jump coolant only leads to phantom cooling effect on downstream part of the vane suction side surface. The net heat flux reduction ( NHFR ) between two cavity vortexes and at pressure side junction are individually 0< NHFR <0.2 and −0.2< NHFR < −0.1. At high blowing ratio, the jump coolant can cover the pressure side junction with the highest cooling effectiveness of 0.5. The jump coolant can flow across the horseshoe vortex and directly upwash the vane surface. The weak protection regions between two cavity vortexes and near the attachment line of the pressure side horseshoe vortex enlarges. Compared with the forward step, the backward step achieves a lower NHFR by up to 0.1 and a higher Nusselt number. This paper provides an in-depth analysis of the aero-thermal physics of endwall jump cooling concerning realistic combustor-turbine interface conditions.

Combustor Wall Coolant Discharge Effects on Turbine Vane Endwall Curtain Cooling

Endwall Film Cooling Performance for a First-Stage Guide Vane with Upstream Combustor Walls and Inlet Injection

Improved Turbine Vane Endwall Film Cooling by Using Sand-Dune-Inspired Design

An Experimental Study of Turbine Vane Film Cooling Using Endoscope-Based PSP Technique in a Single-Passage Wind Tunnel

Turbine Endwall Film Cooling with Combustor-Turbine Interface Gap Leakage Flow: Effect of Incidence Angle

Endwall Film Cooling Using The Staggered Combustor-Turbine Gap Leakage Flow

Heat Transfer Measurements of Vane Endwall With Film Cooling and Impingement Cooling

Gas turbine endwall film cooling and heat transfer characteristics with a multi-cavity slashface gap design

Turbine vane endwall partition film cooling based on the passage vortex core line

Improving Turbine Endwall Overall Cooling Effectiveness Using Curtain Cooling and Redistributed Film-Hole Layouts: An Experimental and Computational Study

Effects of Endwall 3D Contouring on Film Cooling Effectiveness of Cylindrical Hole Injections at Different Locations on Vane Endwall

Experimental Investigation of Endwall Heat Transfer with Film and Impingement Cooling

Measurements of Detailed Heat Transfer Characteristics on a High-Pressure Turbine Vane Endwall with Coolant Injection

Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling

Contoured Endwall Flow And Heat Transfer Experiments With Combustor Coolant And Gap Leakage Flows For A Turbine Nozzle Guide Vane

Experimental and numerical study on film cooling effectiveness of an annular cascade endwall with different slot configuration

Experimental Investigation Of Nonperiodic Endwall Film Cooling In Neighboring Passages With Upstream Rotating Flow

Turbine Blade Endwall Heat Transfer And Film Cooling Performance With Multi-Gap Jets And Film Holes

Influence of coolant mass flow rate on the endwall conjugate heat transfer

Conjugate Heat Transfer Measurements and Predictions for the Vane Endwall of a High-Pressure Turbine with Upstream Purge Flow

Film cooling effect of upstream jump coolant on turbine endwall with combustor-turbine interface misalignment