Abstract:With the theory of thin diaphragm deformation and the piezoelectric constitutive equation, under the constant voltage conditions, an analytical model on deflection of a circular piezoelectric actuator is proposed to investigate the stress distribution of the actuator. Based on the geometric parameters and material properties of the literatures, the model results agree with the literature experimental data and simulations within 10%. Furthermore, the accuracy of model results is also validated by experiments with the maximal offset less than 7%. Thus, the model results are used for studying the impacts on piezoelectric actuator displacement in the different parameters, which include the voltage, the radius ratio and the thickness of piezoelectric layer and elastic layer. The results show that: the displacement of circular piezoelectric actuator linearly varies with the voltage, and the optimized radius ratio of piezoelectric layer and elastic layer is 0.75 to obtain the maximal center displacement of circular piezoelectric actuator. Moreover, when the voltage, material properties and radius ratio are fixed, the impacts on the displacement of circular piezoelectric diaphragm under the different thickness of piezoelectric layer and elastic layer are analyzed. With the fixed thickness of the multi-layer, the optimal thickness ratio of piezoelectric layer and elastic layer is obtained by analytical model results. By analyzing the different influences of these parameters, the structure design of a circular piezoelectric actuator is guided and optimized.

An accurate analytical expression for predicting the performance of piezoelectric cantilever based actuators and sensors

Polynomial Solutions to Piezoelectric Beams (ii)—analytical Solutions to Typical Problems

Performance analysis of piezoelectric cantilever bending actuators

Analysis of A Three-Dimensional Fem Model of A Thin Piezoelectric Actuator Embedded in an Infinite Host Structure

A Compact Piezoelectric Stack Actuator and Its Simulation in Vibration Control

Electromechanical coupling effects of piezoelectric laminated devices

Theoretical Analysis of Dynamic Property for Piezoelectric Cantilever Triple-Layer Benders with Large Piezoelectric and Electromechanical Coupling Coefficients

Analytical solutions for the transverse deflection of a piezoelectric circular axisymmetric unimorph actuator.

Theoretical modeling of a circular piezoelectric actuator for micro-systems

Analysis of Functionally Graded and Laminated Piezoelectric Cantilever Actuators Subjected to Constant Voltage

Non-Linear Piezoelectric Actuator with a Preloaded Cantilever Beam.

Admittance matrix of a symmetrical triple-layer piezoelectric cantilever

Bending of laminated piezoelectric cantilever actuator under constant voltage

Split electrode in-plane bending piezoelectric actuators. Theoretical studies on tip displacement and electric field induced stress

Dynamic Analysis of Structures with Piezoelectric Actuators Based on Thermal Analogy Method

Analytical Deflection Model and Parametric Optimization of a Circular Diaphragm-type Piezoactuator

Establishment Of Actuation Model Of The Three-Layer Structure Piezoelectric Bimorph And Simulation Analysis Based On Analysis Of The Internal Energy

Theoretical Analysis of the Sensor Effect of Cantilever Piezoelectric Benders

Analytical Solution for Bending of a Piezoelectric Cantilever Beam under an End Load

Finite Element Analysis on Piezoelectric Torsion Actuator

A Generalized Approach on Bending and Stress Analysis of Beams with Piezoelectric Material Bonded