Abstract:The synthesis of dibenzofurans and bicycloalkanes from biomass is important for sustainable high-value chemicals and high-density fuels. Currently, their biomass-based precursor is mainly derived from lignin with limited yields. Herein, we propose a cellulose-based synthesis route for dibenzofurans with a yield of 72.3% via the integration of oxidative coupling of 1,2,4-benzenetriol to diphenol combined with subsequent dehydration under environmentally friendly reaction conditions. After hydrodeoxygenation, bicycloalkanes are obtained with a yield of 70.5% by catalysis performed over Pd/C and various zeolites. This work provides a powerful cellulose-based strategy for the synthesis of dibenzofurans and bicycloalkanes, which was previously unattainable in the conventional lignin-based route.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00864?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00864</a>.Figures of HPLC and GC patterns, mass spectra, 13C NMR spectra, time-dependent product and intermediate distributions, catalytic effect, N2 adsorption–desorption isotherms, NH3-TPD profiles, selectivity of biocyclic alkanes with different zeolites, and reaction performance of crude mixture and table of physico-chemical properties of different solid acids (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00864/suppl_file/sc1c00864_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Correction to Robinson Annulation-Directed Synthesis of Jet-Fuel-Ranged Alkylcyclohexanes from Biomass-Derived Chemicals

Robinson Annulation-Directed Synthesis of Jet-Fuel-Ranged Alkylcyclohexanes from Biomass-Derived Chemicals

High Tension Cyclic Hydrocarbons Synthesized from Biomass-Derived Platform Molecules for Aviation Fuels in Two Steps

Production of Low-Freezing-Point Highly Branched Alkanes Through Michael Addition

Conversion of Raw Lignocellulosic Biomass into Branched Long‐chain Alkanes Through Three Tandem Steps

Synthesis of Renewable Lubricant Alkanes from Biomass-Derived Platform Chemicals

Catalytic One-Pot Conversion of Renewable Platform Chemicals to Hydrocarbon and Ether Biofuels Through Tandem Hf(OTf)4 +pd/c Catalysis.

Production of High Quality Fuels from Lignocellulose-Derived Chemicals: a Convenient C–C Bond Formation of Furfural, 5-Methylfurfural and Aromatic Aldehyde

Selective Synthesis of Bioderived Dibenzofurans and Bicycloalkanes from a Cellulose-Based Route

From Lignin to Cycloparaffins and Aromatics: Directional Synthesis of Jet and Diesel Fuel Range Biofuels Using Biomass.

Synthesis of High Density and Low Freezing Point Jet Fuels Range Cycloalkanes with Cyclopentanone and Lignin-Derived Vanillins

Synthesis of Jet Fuel Range Cycloalkanes with Cyclopentanone and Furfural

Selective One-Pot Production of High-Grade Diesel-Range Alkanes from Furfural and 2-Methylfuran over Pd/NbOPO4.

Direct Conversion of Isopropanol to C6+ Branched Compounds As High-Octane Gasoline Blendstocks

Synthesis of a high-density jet fuel with creosol and formaldehyde

One-pot Solvent-Free Sequential Synthesis of High-Density Polycycloalkanes Fuels from Lignin-Derivatives over Laminated NbOPO4 Catalyst

Tandem Reactions for the Synthesis of High-Density Polycyclic Biofuels with a Double/Triple Hexane Ring

Selective Synthesis of Renewable Bio-Jet Fuel Precursors from Furfural and 2-Butanone via Heterogeneously Catalyzed Aldol Condensation

Synthesis of renewable isoindolines from bio-based furfurals

Synthesis of high-density bio-jet fuel by one-pot Mannich-Michael reaction and subsequent hydrodeoxygenation over alkali-treated zeolite catalysts

A Novel Route for the Flexible Preparation of Hydrocarbon Jet Fuels from Biomass-Based Platform Chemicals: a Case of Using Furfural and 2,3-Butanediol As Feedstocks