Abstract:Lithium-ion (Li-ion) cells are the optimal choice of energy storage for battery electric vehicles. As the Li-ion cells must operate in a temperature range of 15–45 °C for optimal performance and life, thermal control of the cells is paramount. The study uses infrared imaging to investigate the temperature dynamics of two lithium-ion pouch cells with two energy capacities, 60 Ah and 20 Ah under different operational scenarios with natural convection. Experimental analysis conducted at ambient temperatures of 27 °C, 35 °C, and 40 °C reveals the necessity of cooling for the 20 Ah cell at temperatures exceeding 40 °C and C-rates beyond 1C. Similarly, thermal management is recommended for the 60 Ah cell at ambient temperatures of 35 °C and above, as temperatures surpass the 45 °C desirable threshold during charging and discharging rates of 1C and higher. Further studies are concentrated on the 60 Ah cell due to its increased cooling demands in comparison to the 20 Ah cell. The 60 Ah cell is modelled using NTGK and ECM electrochemical models and validated against experimental data, showing a good agreement within ±10% between both models and the experimental study. Finally, numerical simulations explain the efficacy of localized cooling with forced convection of liquid and performance metrics are introduced to evaluate the cooling efficiency of design configurations. Based on performance metrics, the T-shaped cold plate design, with an inlet coolant temperature of 30 °C, achieved the highest performance index of 1.13. This design notably decreased the maximum temperature and maximum temperature difference by 41.8% and 31.8%, respectively, compared to natural convection. This improvement is observed during the discharge of 60 Ah cell at 2C in a 40 °C environment, where the cell demands substantial cooling measures. Therefore, implementing localized cooling for the cell demonstrates its effectiveness in regulating temperature increase, leading to a significant decrease in the infrastructure requirements and weight of the thermal management system.

Experimental Study on Thermal Characteristics and Temperature Distribution of Laminated Lithium-Ion Power Battery

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Determination on the Inherent Thermal Conductivity and Thermal Contact Resistance of Individual Thin-Layer Materials in Li-ion Batteries

Numerical and experimental study on thermal behavior of prismatic lithium-ion battery for large-capacity energy storage

Examining Temporal and Spatial Variations of Internal Temperature in Large-Format Laminated Battery with Embedded Thermocouples

Numerical and experimental study on thermal management of NCM-21700 Li-ion battery

Experimental Investigation on Pouch Lithium-ion Battery Thermal Management with Mini-Channels Cooling Plate Based on Heat Generation Characteristic

A comprehensive study on thermal conductivity of the lithium‐ion battery

Thermal Management of Air-Cooling Lithium-Ion Battery Pack

Thermal management of 21700 Li-ion battery packs: Experimental and numerical investigations

Thermal characterization of pouch cell using infrared thermography and electrochemical modelling for the Design of Effective Battery Thermal Management System

Numerical Investigation of the Thermal Performance of Air-Cooling System for a Lithium-Ion Battery Module Combined with Epoxy Resin Boards

Thermal Behaviour of a Cylindrical Li-Ion Battery

In-situ measurement of the heat generation of LiFePO4 and Li(Ni1/3Co1/3Mn1/3)O2 batteries

Thermal Analysis of Lithium-Ion Batteries

Non-contact Steady-State Thermal Characterization of Lithium-Ion Battery Plates Using Infrared Thermography

Experimental study on the effect of ambient temperature and discharge rate on the temperature field of prismatic batteries

Thermal Design Optimization of Laminated Lithium Ion Battery Based on the Analytical Solution of Planar Temperature Distribution

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Evaluation of the influence of lithium-ion battery composition on thermal power generation