Abstract:The coherent passive optical network (PON) is a promising solution for the next generation of high-speed optical access network, capable of supporting 100G and beyond data rate. Moreover, the flexibility and adaptability of coherent PON (CPON) have attracted increasing interest. A flexible PON can enhance system throughput through adaptive modulation formats, baud rates, and coding techniques. One critical challenge for adaptive-modulation flexible CPON is the need for fast-tracking of the channel status, particularly for the downstream transmission. This is particularly important as signals with different modulation formats are continuous in downstream transmission. In the present study, we proposed and experimentally demonstrated a pilot-aided digital signal processing (DSP) scheme in a 300 G flexible CPON based on 41664-QAMs, which avoids burst-signal processing in downstream transmission during modulation-format switching. The pilot symbols that we insert enable continuous tracking of the state-of-polarization, finite impulse response (FIR) coefficients for channel equalization, and carrier phase. The feasibility of the proposed pilot-aided DSP scheme was verified experimentally in four transmission cases involving different modulation formats. As a proof of concept, we achieved continuous signal processing in the downstream coherent signal detection, enabling 100-300 G flexible data transmission. We achieved total power budgets of 38, 30, and 20 dB for 25-GBaud polarization-division-multiplexed (PDM) 41664-QAM signals after 20-km single-mode fiber (SMF), respectively.

Experimental Demonstration of Unequally Spaced PAM-4 Signal to Improve Receiver Sensitivity for 50-Gbps PON with Power-Dependent Noise Distribution

Low-Latency 100 Gb/s PAM-4 PON with 42.5 Db Power Budget over 20 Km Anti-resonant Hollow-core Fiber

Single-Wavelength 100-Gb/s PAM-4 TDM-PON Achieving over 32-Db Power Budget Using Simplified and Phase Insensitive Coherent Detection.

200-Gb/s/λ PDM-PAM-4 PON with 29-dB Power Budget Based on Heterodyne Coherent Detection

8 × 10 Gb/s Downstream PAM-4 Transmission for Cost-Effective Coherent WDM-PON Application

Demonstration of 200 Gb/s/λ PON in O-band with High-Bandwidth TFLN Modulator

Symmetrical 50-Gb/s/λ PAM-4 TDM-PON at O-Band Supporting 26 Db+ Loss Budget Using Low-Bandwidth Optics and Semiconductor Optical Amplifier.

Low-latency 100?Gb/s PAM-4 PON with a 42.5?dB power budget over the 20?km anti-resonant hollow-core fiber

64-Gb/s/a Downstream Transmission for PAM-4 TDM-PON with Centralized DSP and 10G Low-Complexity Receiver in C-Band

SOA Pre-Amplified 100 Gb/s/λ PAM-4 TDM-PON Downstream Transmission Using 10 Gbps O-Band Transmitters

60 Gbit/s PAM-4 Wireless Transmission in the 310 GHz Band with Nonlinearity Tolerant Signal Processing

Symmetrical 50-Gb/s/λ PAM-4 TDM-PON in O-band with DSP and Semiconductor Optical Amplifier Supporting PR-30 Link Loss Budget

Demonstration of Pilot-Aided Continuous Downstream Digital Signal Processing for Multi-Format Flexible Coherent TDM-PON

The Best Modulation Format for Symmetrical Single-wavelength 50-Gb/s PON at O-band: PAM, CAP or DMT?

Experimental Demonstration of 20-GB/S PDM Upstream Transmission Using Intensity Modulator and SCFDE for Coherent WDM-PON

Demonstration Of 100-Gb/S/Lambda Pam-4 Tdm-Pon Supporting 29-Db Power Budget With 50-Km Reach Using 10g-Class O-Band Dml Transmitters

200 Gbps/λ PON Downstream C-Band Direct-Detection Links with ≥29 dB Power Budget

200 Gbit/s/λ PDM-PAM-4 PON System Based on Intensity Modulation and Coherent Detection

PAM-4 Signal Delivery in One Radio-over-fiber System

Demonstration of Real-Time DMT-WDM-PON Employing Probabilistic Shaping Based on Intra-Symbol Bit-Weighted Distribution Matching

Experimental Demonstration for over Mbps Baseband-over-Modulation AMCC Implementation in PtP WDM-PON.