Piezophototronic Effect Enhanced Photoresponse of the Flexible Cu(In,Ga)Se2 (CIGS) Heterojunction Photodetectors

Shuang Qiao,Jihong Liu,Xiaona Niu,Baolai Liang,Guangsheng Fu,Zhiqiang Li,Shufang Wang,Kailiang Ren,Caofeng Pan

DOI: https://doi.org/10.1002/adfm.201707311

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:The Cu(In,Ga)Se2 (CIGS) heterojunction, as a mature and high efficiency thin‐film solar cell, is rarely studied as a photodetector, especially in flexible substrates. In this paper, the structure of an ITO/ZnO/CdS/CIGS/Mo heterojunction is grown on the polyimide (PI) substrate to form a flexible CIGS heterojunction photodetector. The photodetector can work in a very wide band ranging from 350 to 1200 nm with responsivity up to 1.18 A W−1 (808 nm), detectivity up to 6.56 × 1010 Jones (cmHz1/2 W−1), and response time of 70 (/88) ms, respectively. Moreover, the piezophototronic effect is first used to investigate performance modulation of this device by effectively controlling the separation and transport of carriers at the interface of CdS/ZnO. Interestingly, by externally applying a 0.763% tensile strain, the photoresponsivity and detectivity of the photodetector exhibit a decrease from 1.18 to 0.88 A W−1, and from 6.56 × 1010 to 4.81 × 1010 Jones, respectively, while under a –0.749% externally static compressive strain, the photoresponsivity could be enhanced by ≈75.4% with a maximum of 2.07 A W−1, and the detectivity is improved by ≈66.1% with its peak value up to 10.9 × 1010 Jones. Meanwhile, the response time can be modulated from 99(/116) to 41.3(/42.6) ms. This work suggests that the CIGS heterojunction has great potential in novel applications for piezophototronic sensors and also gives a hint to modulate the performance of other multilayer heterostructures via the piezotronic effect.