Abstract:ZnO has long been considered as a model UVdriven photoanode for photoelectrochemical water splitting, but its performance has been limited by fast charge-carrier recombination, extremely poor stability in aqueous solution, and slow kinetics of water oxidation. These issues were addressed by applying a strategy of optimization and passivation of hydrothermally grown 1D ZnO nanowire arrays. The length and diameter of bare ZnO nanowires were optimized by varying the growth time and precursor concentration to achieve optimal photoelectrochemical performance. The addition of earth-abundant cobalt phosphate (Co-Pi) and nickel borate (Ni-B) oxygen evolution catalysts onto ZnO nanowires resulted in substantial cathodic shifts in onset potential to as low as about 0.3 V versus the reversible hydrogen electrode (RHE) for Ni-B/ZnO, for which a maximum photocur- rent density of 1.1 mAcm(-2) at 0.9V (vs. RHE) with applied bias photon-to-current efficiency of 0.4% and an unprecedented near-unity incident photon-to-current efficiency at 370 nm. In addition the potential required for saturated photocurrent was dramatically reduced from 1.6 to 0.9V versus RHE. Furthermore, the stability of these ZnO nanowires was significantly enhanced by using Ni-B compared to Co-Pi due to its superior chemical robustness, and it thus has additional functionality as a stable protecting layer on the ZnO surface. These remarkable enhancements in both photocatalytic activity and stability directly address the current severe limitations in the use of ZnO-based photoelectrodes for watersplitting applications, and can be applied to other photoanodes for efficient solar-driven fuel synthesis.

An Overlapping ZnO Nanowire Photoanode for Photoelectrochemical Water Splitting

Highly Efficient and Stable P-Type ZnO Nanowires with Piezotronic Effect for Photoelectrochemical Water Splitting

Optimization of Electrolyte to Significantly Improve Photoelectrochemical Water Splitting Performance of ZnO Nanowire Arrays

Synthesis of WO3@ZnWO4@ZnO-ZnO Hierarchical Nanocactus Arrays for Efficient Photoelectrochemical Water Splitting

CuO/ZnO Heterojunction Nanoarrays for Enhanced Photoelectrochemical Water Oxidation

Photoelectrochemical Performance Enhancement of Zno Photoanodes from Znin2s4 Nanosheets Coating

Enhanced charge separation of NiO/ZnO P-N heterojunction nanorod arrays for photoelectrochemical water splitting

1D ZnO/BiVO4 Heterojunction Photoanodes for Efficient Photoelectrochemical Water Splitting

Hierarchical ZnO Nanorod/znfe2o4 Nanosheet Core/shell Nanoarray Decorated with PbS Quantum Dots for Efficient Photoelectrochemical Water Splitting

Hot electron assisted photoelectrochemical water splitting from Au-decorated ZnO@TiO2 nanorods array

Nitrogen-doped ZnO Nanowire Arrays for Photoelectrochemical Water Splitting.

1D Alignment of ZnO@ZIF-8/67 Nanorod Arrays for Visible-Light-driven Photoelectrochemical Water Splitting

Hierarchical Architectures of Wrinkle-Like ZnFe2O4 Nanosheet-Enwrapped ZnO Nanotube Arrays for Remarkably Photoelectrochemical Water Splitting to Produce Hydrogen

Highly Enhanced Visible-Light-Driven Photoelectrochemical Performance of ZnO-Modified In2S3 Nanosheet Arrays by Atomic Layer Deposition

Hydrophilic Polypyrrole and G-C3n4 Co-Decorated ZnO Nanorod Arrays for Stable and Efficient Photoelectrochemical Water Splitting

Earth-Abundant Oxygen Evolution Catalysts Coupled Onto Zno Nanowire Arrays for Efficient Photoelectrochemical Water Cleavage

Design of Sandwich-Structured ZnO/ZnS/Au Photoanode for Enhanced Efficiency of Photoelectrochemical Wate Splitting

Surface Plasmon-Driven Photoelectrochemical Water Splitting of Aligned ZnO Nanorod Arrays Decorated with Loading-Controllable Au Nanoparticles

Au Nanoparticle Sensitized ZnO Nanopencil Arrays for Photoelectrochemical Water Splitting

ZnO Hemisphere Pits Nanowire/CdS Photoelectrode for High-Efficiency Photoelectrochemical Water Splitting

A Conductive ZnO:Ga/ZnO Core-Shell Nanorod Photoanode for Photoelectrochemical Water Splitting