Abstract:Besides the design and synthesis of nonfullerene acceptors, the selection of polymer donors is also critical in determining the photovoltaic performance of nonfullerene organic solar cells (OSCs). However, the selection criteria of polymer donors for nonfullerene OSCs has been rarely investigated. In this work, a novel nonfullerene acceptor (MDB) with spa-hybridized-carbon-free ladder-type skeleton was developed and used as a model compound to study the effects of miscibility and molecular ordering in determining the performance of MDB-based solar cells. In order to achieve matched energy levels and complementary absorption, three wide-bandgap polymers (PM6, T71, and P3HT) with different chemical structures were selected to blend with MDB for OSCs. The donor:acceptor miscibilities of the three blends were estimated by contact angle measurements, while their crystallinity and phase separation were investigated by grazing incidence wide-angle X-ray scattering characterization and atomic force microscopy measurement, respectively. The interfacial tension values between MDI3 and PM6, MDB and J71, as well as MDB and P3HT were determined as 0.49, 0.16, and 2.00 mN.m(-1), in that order. Owing to the proper miscibility between MDB and PM6, the resulting blend film exhibits suitable phase separation, "face-on" molecular orientation as well as compact molecular pi-pi stacking, which promotes carrier transport and suppresses bimolecular recombination. As a result, the best-performance OSC based on PM6:MDB delivered an outstanding PCE of 13.26%. In contrast, J71:MDB-based devices exhibited a lower PCE of 8.16%, due to the excessively high miscibility of J71 and MDB. As for P3HT:MDB-based devices, the poor miscibility between P3HT and MDB provides the driving force for the formation of large phase separation, which leads to an extremely low PCE of 0.45%. This work demonstrates that suitable miscibility is one of the key factors to achieve high-performance OSCs, which is an important guideline for the design and selection of next-generation photovoltaic materials.

A Universal Nonfullerene Electron Acceptor Matching With Different Band-Gap Polymer Donors For High-Performance Polymer Solar Cells

A High‐Performance Non‐Fullerene Acceptor Compatible with Polymers with Different Bandgaps for Efficient Organic Solar Cells

Wide bandgap polymer donors for high efficiency non-fullerene acceptor based organic solar cells

Regioregular Narrow‐Bandgap n‐Type Polymers with High Electron Mobility Enabling Highly Efficient All‐Polymer Solar Cells

Wide Bandgap Polymer Donors with an Acceptor1-Π-acceptor2-π Configuration for Efficient Polymer Solar Cells

Towards High-Efficiency Non-Fullerene Organic Solar Cells: Matching Small Molecule/polymer Donor/acceptor

Comparison Study of Wide Bandgap Polymer (PBDB-T) and Narrow Bandgap Polymer (PBDTTT-EFT) As Donor for Perylene Diimide Based Polymer Solar Cells

Comparing the Device Physics, Dynamics and Morphology of Polymer Solar Cells Employing Conventional PCBM and Non-Fullerene Polymer Acceptor N2200

Wide Bandgap Polymer Donors Based on Succinimide-Substituted Thiophene for Nonfullerene Organic Solar Cells

Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells

All-polymer solar cells based on a novel narrow-bandgap polymer acceptor with power conversion efficiency over 10%

Wide Bandgap Polymer Donors Based on Succinimide‐Substituted Thiophene for Non‐Fullerene Organic Solar Cells

A Narrow Band Gap Non-Fullerene Electron Acceptor Based on a Dithieno-3,2-b:2′,3′-Dlpyrrole Unit for High Performance Organic Solar Cells with Minimal Highest Occupied Molecular Orbital Offset

Efficient Organic Ternary Solar Cells Employing Narrow Band Gap Diketopyrrolopyrrole Polymers and Nonfullerene Acceptors

High-Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor.

Achieving over 16% Efficiency for Single-Junction Organic Solar Cells

A Rational Design and Synthesis of Cross-Conjugated Small Molecule Acceptors Approaching High-Performance Fullerene-Free Polymer Solar Cells

Manipulating Polymer Donors Toward a High-Performance Polymer Acceptor Based on a Fused Perylenediimide Building Block with a Built-In Twisting Configuration

Rationally Tuning Blend Miscibility of Polymer Donor and Nonfullerene Acceptor for Constructing Efficient Organic Solar Cells

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells.

A Universal Fluorinated Polymer Acceptor Enables All-Polymer Solar Cells with >15% Efficiency