Abstract:Revealing the relationship among the machining parameters, surface topography, and functionality-related properties of the machined surface is crucial for obtaining micro-milling surfaces with good functional performance. In the present study, slot micro-milling Ti6Al4V was conducted to investigate the effect of machining parameters on the 3D surface topography, with an emphasis on surface defects, the 3D surface texture parameters, and functionality-related properties of the machined surface. The results show that the 3D surface topography of the machined surface presents obvious anisotropy in slot micro-milling Ti6Al4V. The 2D surface profile shows the non-uniformity along the slot width direction in slot micro-milling Ti6Al4V. The surface defects with different machining parameters are various, such as deep and large feed marks of single cutting, narrow and small feed marks of single cutting, feed marks of multi-cutting, scratch marks, scratch pit, surface tearing, tear pit, back-cutting marks, and metal debris. With the consideration of cutting processing efficiency and surface roughness Sa, it is suggested to adopt the high spindle speed and large depth of cut. At the same time, feed per tooth that is near the minimum cutting thickness is recommended to obtain the minimum surface roughness with the balance of chip thickness accumulation effect and chip removal or surface formation. Moreover, the functionality-related properties of the machined surface, e.g. friction or abrasion contact behaviors, load-bearing capacity, fluid retention properties, fatigue performance, and the machining parameter effect were evaluated with surface texture parameters, such as amplitude parameters, spatial parameters, hybrid parameters, and functional or volume parameters. Our findings are of great significance for shedding light on the relationship between the surface formation mechanism, surface topography, and functionality-related properties of machined surfaces in micro-milling Ti6Al4V.

Extraction of Features for Surface Topography by Morphological Component Analysis

Preparation of Measured Engineering Surfaces for Modeling Tribological Systems, Part I: Characterization and Reconstruction

Modeling and characterizing of surface texture produced by scraping process

A Study of Tribological Performance Prediction Based on Surface Texture Parameters

Surface Characteristic Profile Extraction Based on Hilbert–Huang Transform

Multiscale characterization and contact performance analysis of machining surfaces

Hybrid Dimension Based Modeling of Part Surface Topography and Identification of Its Characteristic Parameters

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

A review on theories/methods to obtain surface topography and analysis of corresponding affecting factors in the milling process

Coarse-to-Fine Extraction of Free-Form Surface Features

Tribological Properties and 3D Topographic Parameters of Hard Turned and Ground Surfaces

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

Using Wavelet Packet Transform for Surface Roughness Evaluation and Texture Extraction

Research in Improving Tribology Performance by Surface Texturing

Feature Extraction of Non-Stochastic Surfaces Using Curvelets

Feature Surface Extraction and Reconstruction from Industrial Components Using Multistep Segmentation and Optimization

Effect of Surface Topography of Scraped Machine Tool Guideways on Their Tribological Behaviour

Research Progress on the Design of Surface Texture in Tribological Applications: A Mini-Review

A Novel Simulation Method of Micro-Topography for Grinding Surface.

Multiscale Analysis of Surface Morphologies by Curvelet and Contourlet Transforms

3D surface topography analysis and functionality-related performance of the machined surface in slot micro-milling titanium alloy Ti6Al4V