Abstract:Layered double hydroxides (LDH) are a class of basic inorganic layered compounds, which are widely used in the fields of adsorption and catalysis owing to their unique structure and properties. In previous studies, costly soluble Al salts or Al(OH)3 were used as the Al sources for the synthesis of Mg?Al LDH. The present work proposes a facile and one-pot method to synthesize Mg?Al LDH in a water bath with MgO and MK as precursors, which are both obtained from abundant natural resources. The effects of liquid/solid ratio (30:1 or 60:1), synthesis temperature (55?90 ?C) and alkali concentration (3 or 6 mol/L) were investigated on the composition and characteristics of the synthetic products. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), Scanning electron microscope (SEM) and Nuclear magnetic resonance (NMR). Findings showed that a highly alkaline solution (6 M NaOH) promoted the dissolution of MK, resulting in the release of trivalent Al for the formation of LDH. Increasing temperature also led to faster dissolution of MK and released more Al and Si, which resulted in the formation of both LDH and zeolite. More importantly, it was found that Mg2+ released during the hydrolysis of MgO combined with Al-containing substances directly to precipitate LDH, whereas its hydration product, i.e., brucite, remained stable in the alkaline condition and released little Mg2+ to participate in the formation of LDH. Zeolites may form depending on the Si/Al ratio of the solution which is governed by the various synthesis parameters. The findings not only shed lights on the reaction mechanism between the MgO and MK and the role of key synthetic conditions in the formation of LDH and zeolitic phases, but also demonstrated the feasibility of using widely-available, low-cost natural minerals to produce commercial adsorbents/catalysts.

Mechano-hydrothermal Preparation of Li-Al-OH Layered Double Hydroxides

Synthesis of Mg–Al–Fe–NO3 Layered Double Hydroxides Via a Mechano-Hydrothermal Route

Understanding Li-Al-CO3 Layered Double Hydroxides. (I) Urea-supported Hydrothermal Synthesis

Mechanochemical Approach to Get Layered Double Hydroxides: Mechanism Explore on Crystallite Growth

Synthesis and Characterization of Mg-Al Layered Double Hydroxide

Hydrothermal Synthesis of Layered Double Hydroxides (ldhs) from Mixed MgO and Al2O3: LDH Formation Mechanism

Preparation of the layered double hydroxide (LDH) LiAl2(OH)7·2H2O, by gel to crystallite conversion and a hydrothermal method, and its conversion to lithium aluminates

Mechano-hydrothermal synthesis of Mg2Al-NO3 layered double hydroxides

Mechanochemical approach for synthesis of layered double hydroxides

A Mechanochemical Approach to Get Stunningly Uniform Particles of Magnesium–aluminum-Layered Double Hydroxides

Structural and Morphological Transformations of Zn–Al Layered Double Hydroxides Through Hydrothermal Treatment

Preparation and Wettability of Zn–Al Layered Double Hydroxide Film Directly Grown on Highly Porous Anodic Alumina Oxide Template

Hydrothermal synthesis of Mg-Al layered double hydroxides (LDHs) from natural brucite and Al(OH) 3

Facile and green hydrothermal synthesis of MgAl/NiAl/ZnAl layered double hydroxide nanosheets: a physiochemical comparison

Structural characterization and thermal behavior of Ni/Mg/Al layered double hydroxides

Solvothermal synthesis of Li-Al layered double hydroxides and their electrochemical performance

Synthesis and thermal properties of ZnAl layered double hydroxide by urea hydrolysis

Formation and Corrosion Protection of Layered Double Hydroxide Film on Mg-4Li-3Al and Mg-14Li-3Al Alloys

Synthesis of Layered Double Hydroxides with Novel Morphologies

One-pot Synthesis of Mg-Al Layered Double Hydroxide (LDH) Using MgO and Metakaolin (MK) As Precursors

A Green Route for the Preparation of Layered Double Hydroxides from Basic Magnesium Carbonate