Abstract:In urban areas, vertical axis wind turbines have been installed on both sides of the road and rooftop. Compared with rooftop, vertical axis wind turbines mounted on the side of a building have a larger swept area with longer blades, and the effect of tip vortices can be reduced at the same time. Around the building, there are several high wind speed regions that can provide more wind energy. In this paper, a high-resolution numerical method composed of overset grid and adaptive mesh refinement techniques is adopted to verify the feasibility of vertical axis wind turbines mounted on the side of the building. Firstly, the complex flow field around the building is simplified into the flow field around the cylindrical building. Five typical flow regions with different flow conditions are determined: windward zone, crosswind zone, tailwind zone, recirculation zone and leeward zone. Secondly, wind turbines are installed evenly around the building. The simulation results show that the energy output of wind turbines in tailwind zone can be increased by 120% compared with the reference value. Thirdly, multiple wind turbines are coupled with the building. In order to get the optimal arrangement, power outputs of four arrangements are compared for the best choice. The results indicate that the arrangement with six wind turbines in crosswind zone and tailwind zone can achieve the best performance. Through changing the rotational directions, the forward blades of wind turbines can be close to the wall, and the energy output of all the wind turbines around the building can be improved.

Influence of Roof Shape on Micrositing of Rooftop Wind Turbine in the Building Group

Numerical simulation of wind pressures on low-rise hip roofed buildings

Numerical study of wind-driven rain distribution on low-rise buildings with different roof styles

Numerical Simulation Analysis of Multi-types Wind Disturbance on Gabled Roof of Low-rise Building

Wind environment simulation and wind power utilizability of Anzhong Building

Numerical study of wind loads on low-rise gable-roofed building roofs——Analysis of roof pitch and height-width ratio effects

Numerical Research of Layout Effect on Wind Environment Around High-Rise Buildings

Analysis and Practical Determination of Wind-Load Shape Factors for Low-Rise Hip Roofed Buildings

An Urban-Scale Method for Building Roofs Available Wind Resourceevaluation Based on Aerodynamic Parameters of Urban Sublayer Surfaces

Numerical Study of Plan Arrangement Effect on Wind Environment Around Tall Buildings

Study on wind-induced dynamic responses and wind tunnel test for a large-span double-layered roof structure

Simulation and analysis of wind pressure distribution on low-rise buildings

Micrositing of roof mounting wind turbine in urban environment: CFD simulations and lidar measurements

Experimental study on rooftop flow field of building based on the operation of vertical-axis wind turbines

High-resolution Numerical Simulation of the Performance of Vertical Axis Wind Turbines in Urban Area: Part I, Wind Turbines on the Side of Single Building

Experimental investigation of wind characteristics and wind energy potential over rooftops: Effects of building parameters

Wind Tunnel Test on Wind Load Characteristic of Low-Rise Sloping Roof Buildings

Impact of corner modification on wind characteristics and wind energy potential over flat roofs of tall buildings

Wind Tunnel Test on Wind Load Characteristics of Low-Rise Buildings with Complex Shape

Wind Tunnel Test and Numerical Analysis on Wind Load Characteristic of Plan T-shaped Low-rise Buildings

The analysis of characteristics of wind field on roof based on field measurement