Three Dimensional In-Situ Stress Sensor Based on Optical Fiber Sensing Technology

ZHONG Zhi-cheng,ZHAO Bin,LIN Jun,LIU Yu-juan

DOI: https://doi.org/10.3788/ope.20182602.0325

2018-01-01

Optics and Precision Engineering

Abstract:In order to realize the effective monitoring of the spatial stress state of the underground rock formation and its variation.A monitoring method combining plane strain and fiber grating sensing technology was proposed,based on the principle of fiber grating sensing and plane stress state meas-urement.The strain sensor unit was composed of two sets of strain sensor,which were composed of two sets of right angle strain flower and a group of equiaxed strain flower.The three sets of strain flowers were placed in three cylindrical shapes respectively by using carbon fiber laminated composite material.On the probe S1,S2,S3,the three probes were connected with a certain mechanical structure to form the three-dimensional geo-stress sensor of the formation space stress monitoring.The experi-ment of temperature and stress of the fiber strain sensor was carried out,and the stress sensing exper-iment of the whole sensing device was carried out indoors.Experimental results showed that the stress resolution of the fiber strain sensor was 0.017 2 MPa;stress monitoring range of 0-60 MPa;the av-erage error of the maximum principal stress of the probe S1 was 16 .31% , the average error of the maximum principal stress of the probe S2 is 24 .36% ,and the absolute error of the S3 probe was 0 .006 8 MPa .The mean value of the stress space angle error measured by the actual loading stress and the sensor was 1 .24 ° .The monitoring results of the sensor are consistent with the variation of the actual loading stress , which can meet the requirement of continuous monitoring of the spatialstress state of the underground rock.