Pd-doped Ni Nanoparticle-Modified N-doped Carbon Nanocatalyst with High Pd Atom Utilization for the Transfer Hydrogenation of Nitroarenes

Xueliang Cui,Yu Long,Xia Zhou,Guiqin Yu,Jin Yang,Man Yuan,Jiantai Ma,Zhengping Dong

DOI: https://doi.org/10.1039/c7gc03710d

IF: 9.8

2018-01-01

Green Chemistry

Abstract:Highly dispersed PdNi NP modified N-doped mesoporous carbon nanocatalyst was facilely prepared for the transfer hydrogenation of nitroarenes.

What problem does this paper attempt to address?

Ultrafine Pd Nanoparticles Anchored on Nitrogen-Doping Carbon for Boosting Catalytic Transfer Hydrogenation of Nitroarenes

Longkang Zhang,Xiaotong Liu,Xin Zhou,Shutao Gao,Ningzhao Shang,Cheng Feng,Chun Wang

DOI: https://doi.org/10.1021/acsomega.8b01141

IF: 4.1

2018-01-01

ACS Omega

Abstract:The catalytic performance of metal particles is closely related to the particle size. In this article, ultrafine palladium nanoparticles anchored on nitrogen-doping carbon support (Pd/N-XC72R) were fabricated, wherein the N-XC72R was prepared through low-temperature annealing of Vulcan XC72R carbon with urea at 300 °C. Nitrogen dopant on the surface of carbon support can remarkably strengthen the affinity of the metal nanoparticles onto the support. Compared with the Vulcan XC-72R-supported Pd catalyst, the prepared Pd/N-XC72R delivered superior catalytic activity for the transfer hydrogenation of nitroarenes with formic acid as the hydrogen donor at ambient temperature. Our strategy may provide an effective and feasible approach to fabricate N-functionalized carbon materials and construct high-performance ultrasmall metal nanoparticle heterogeneous catalysts.
Palladium Nanoparticles Supported on Nitrogen-Functionalized Active Carbon: A Stable and Highly Efficient Catalyst for the Selective Hydrogenation of Nitroarenes

Zelong Li,Jinlei Li,Jianhua Liu,Zelun Zhao,Chungu Xia,Fuwei Li

DOI: https://doi.org/10.1002/cctc.201301037

2014-01-01

ChemInform

Abstract:Nitrogen-functionalized active carbon-supported ultrasmall Pd nanoparticles were conveniently prepared by using a postloading method. The Pd catalyst was highly active and selective for the hydrogenation of nitroarenes at room temperature under ambient pressure. Reducible groups such as ketone, carboxylic acid, and ester were not hydrogenated, and the corresponding anilines were obtained quantitatively. The Pd catalyst demonstrated high stability and could be reused 10times without the loss of catalytic performance.
Nickel–platinum Nanoparticles Immobilized on Graphitic Carbon Nitride As Highly Efficient Catalyst for Hydrogen Release from Hydrous Hydrazine

Lixin Xu,Na Liu,Bing Hong,Ping Cui,Dang-guo Cheng,Fengqiu Chen,Yue An,Chao Wan

DOI: https://doi.org/10.1039/c6ra01335j

IF: 4.036

2016-01-01

RSC Advances

Abstract:Here we demonstrate that the combination of NiPt alloy nanoparticles with a graphitic carbon nitride (g-C3N4) support facilitates H2 production from hydrous hydrazine in an alkaline solution under moderate conditions.
Pd Supported on G-C3n4 Nanosheets: Mott–Schottky Heterojunction Catalyst for Transfer Hydrogenation of Nitroarenes Using Formic Acid As Hydrogen Source

Saisai Cheng,Xufeng Meng,Ningzhao Shang,Shutao Gao,Cheng Feng,Chun Wang,Zhi Wang

DOI: https://doi.org/10.1039/c7nj04268j

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:Well-dispersed Pd nanoparticles anchored on g-C3N4 nanosheets displayed excellent catalytic activity for the transfer hydrogenation of nitroarenes.
Trace Iron Impurities Deactivate Palladium Supported on Nitrogen-Doped Carbon Nanotubes for Nitrobenzene Hydrogenation

Baoqiang Dong,Yuhang Li,Xiaomei Ning,Hongjuan Wang,Hao Yu,Feng Peng

DOI: https://doi.org/10.1016/j.apcata.2017.07.035

2017-01-01

Abstract:Nitrogen-doped carbons can effectively stabilize noble metal particles to achieve high catalytic performances. However, the metallic impurities in carbon nanomaterials, e.g. the residual growth catalysts of carbon nanotubes (CNTs), have some unforeseen effects on the catalysis involving nanocarbons. Herein, we demonstrate that the residual growth catalysts of N-doped CNTs (NCNTs) may significantly deactivate Pd catalysts for the hydrogenation of nitrobenzene. Through high-resolution transmission electron microscopy and CO-stripping, it was determined that the N dopants improved the dispersion of Pd nanoparticles. However, the iron, at ppm level, in residual catalysts encapsulated inside NCNTs can transfer onto the surface of Pd to block active sites so that the activity of Pd/NCNTs was much lower than that of Pd/CNTs. The similar effect was observed for most of the common metallic impurities in carbon materials, including Co, Ni, Mn, Cr, Cu, Zn, Mo, Al and Mg. To exploit the N-doped carbons, we deposited N-doped carbon layers on purified CNTs through pyridine pyrolysis and then supported Pd nanoparticles. By this means, the activity of Pd for nitrobenzene hydrogenation was improved by 3.85 folds compared to conventional CNTs, emphasizing the importance of controlling impurities in N-doped carbon materials for high performance catalysts.
Highly dispersed Ni nanocatalysts supported by MOFs derived hierarchical N-doped porous carbon for hydrogenation of dicyclopentadiene

Dandan Jia,Jie Zhao,Zhiping Tao,Hongyi Gao,Zhaolin Fu,Rui Yan,Zhongpeng Zhu,Xingtian Shu,Ge Wang

DOI: https://doi.org/10.1016/j.carbon.2021.09.002

IF: 10.9

2021-10-01

Carbon

Abstract:N-doped carbon possesses the advantages of electronic modification and immobilization of metal nanoparticles. Hence, N-doped carbon-based metal catalysts have received extensive attention. This study prepared uniformly dispersed Ni nanoparticles (24.0 wt%) on porous N-doped carbon, which was fabricated via the high temperature pyrolysis of nitrogen-rich ZnNi MOFs with 1H-1,2,3-triazole as the ligand. The 1H-1,2,3-triazole as a high energy ligand could volatilize violently to form a N-doped macroporous carbon-based structure. Zn acted as a fence and prevented the accumulation of Ni during the pyrolysis of ZnNi MOFs. The synergistic effect from the abundant porous structure together with uniformly dispersed Ni nanoparticles proves the excellent catalytic activity toward the hydrogenation of dicyclopentadiene, showing 100% DCPD conversion and >99% THDCPD selectivity.

materials science, multidisciplinary,chemistry, physical
In Situ Encapsulated Ultrafine Pd Nanoparticles in Nitrogen-Doped Porous Carbon Derived from Hyper-Crosslinked Polymers Effectively Catalyse Hydrogenation

Haitao Yu,Li Zhang,Shengguang Gao,Huaqing Wang,Zhiwei He,Yang Xu,Kun Huang

DOI: https://doi.org/10.1016/j.jcat.2021.03.002

IF: 7.3

2021-01-01

Journal of Catalysis

Abstract:Porous carbon-supported metal nanoparticles (NPs) with ultrafine size are of great importance in chemical industry, however, avoiding aggregation and retaining surface activity of these metal NPs is still challenging. In this work, the uniformly dispersed Pd NPs with the size of ca. 1.3 nm are successfully anchored in nitrogen-doped porous carbon (NPC) support via an in situ pyrolysis reduction strategy using nitrogen doped hyper-crosslinked polymers and palladium acetate (Pd(OAc)(2)) as precursors. Especially, upon H2O2 post-treatment, the obtained Pd/NPC-H2O2 (1.3 nm) composites show the excellent catalytic performance for the selective hydrogenation of furfural and quinoline. This newly developed strategy will open an avenue for the large-scale fabrication of active ultrafine metal loaded nanocomposites for various advanced applications. (C) 2021 Elsevier Inc. All rights reserved.
Pd Atomic Engineering of Nanoporous Ni/NiO for Efficient Nitrophenol Hydrogenation Reaction

Fanghui Wei,Min Luo,Jiao Lan,Feng Xie,Lebin Cai,Ting-Shan Chan,Ming Peng,Yongwen Tan

DOI: https://doi.org/10.1021/acsami.3c03491

IF: 9.5

2023-05-23

ACS Applied Materials & Interfaces

Abstract:The catalytic hydrogenation of nitrophenols is widely utilized for both industrial synthesis and environmental protection, thus efficient and cost-effective catalysts are in urgent need. Still, the cost and scarcity of the materials still inhibit their application and the active sites are not well specified, especially in the complex catalysts. Herein, we developed an atomic Pd-doped nanoporous Ni/NiO (Pd(1)@np-Ni/NiO) catalyst via facial dealloying for efficient nitrophenol hydrogenation...

materials science, multidisciplinary,nanoscience & nanotechnology
Ni@Pd Core-Shell Nanoparticles Supported on A Metal-Organic Framework As Highly Efficient Catalysts for Nitroarenes Reduction

Siping Jian,Yingwei Li

DOI: https://doi.org/10.1016/s1872-2067(15)60940-8

IF: 16.5

2016-01-01

Chinese Journal of Catalysis

Abstract:Ni@Pd core-shell nanoparticles with a mean particle size of 8–9 nm were prepared by solvothermal reduction of bivalent nickel and palladium in oleylamine and trioctylphosphine. Subsequently, the first-ever deposition of Ni@Pd core-shell nanoparticles having different compositions on a metal-organic framework (MIL-101) was accomplished by wet impregnation in n-hexane. The Ni@Pd/MIL-101 materials were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy and also investigated as catalysts for the hydrogenation of nitrobenzene under mild reaction conditions. At 30 °C and 0.1 MPa of H2 pressure, the Ni@Pd/MIL-101 gives a TOF as high as 375 h−1 for the hydrogenation of nitrobenzene and is applicable to a wide range of substituted nitroarenes. The exceptional performance of this catalyst is believed to result from the significant Ni-Pd interaction in the core-shell structure, together with promotion of the conversions of aromatics by uncoordinated Lewis acidic Cr sites on the MIL-101 support.
NiPt Nanoparticles Anchored Onto Hierarchical Nanoporous N-Doped Carbon As an Efficient Catalyst for Hydrogen Generation from Hydrazine Monohydrate.

Yu-Ping Qiu,Qing Shi,Liang-Liang Zhou,Mu-Hua Chen,Chen,Piao-Ping Tang,Gavin S. Walker,Ping Wang

DOI: https://doi.org/10.1021/acsami.0c03096

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Catalytic decomposition of the hydrogen-rich hydrazine monohydrate (N2H4·H2O) represents a promising hydrogen storage/production technology. A rational design of advanced N2H4·H2O decomposition catalysts requires an overall consideration of intrinsic activity, number, and accessibility of active sites. We herein report the synthesis of a hierarchically nanostructured NiPt/N-doped carbon catalyst using a three-step method that can simultaneously address these issues. The chelation of metal precursors with polydopamine and thermolysis of the resulting complexes under reductive atmosphere resulted in a concurrent formation of N-doped carbon substrate and catalytically active NiPt alloy nanoparticles. Thanks to the usage of a silica nanosphere template and dopamine precursor, the N-doped carbon substrate possesses a hierarchical macroporous-mesoporous architecture. This, together with the uniform dispersion of tiny NiPt nanoparticles on the carbon substrate, offers opportunity for creating abundant and accessible active sites. Benefiting from these favorable attributes, the NiPt/N-doped carbon catalyst enables a complete and rapid hydrogen production from alkaline N2H4·H2O solution with a rate of 1602 h-1 at 50 °C, which outperforms most existing catalysts for N2H4·H2O decomposition.
Cyanogel-Derived N-Doped C Nanosheets Immobilizing Pd-P Nanoparticles: One-Pot Synthesis and Enhanced Hydrogenation Catalytic Performance

Hao Zhang,Xiaohong Yan,Yundi Huang,Mengru Zhang,Yawen Tang,Dongmei Sun,Lin Xu,Shaohua Wei

DOI: https://doi.org/10.1016/j.apsusc.2016.11.035

IF: 6.7

2017-01-01

Applied Surface Science

Abstract:For Pd-based nanocatalysts, stabilization of Pd nanoparticles on carbon support could not only effectively avoid particle aggregation and maintain catalytic stability during catalytic processes, but also facilitate enhancing the catalytic activity due to the synergy between Pd nanoparticles and carbon support. Furthermore, the incorporation of non-metal of phosphorus (P) into Pd could effectively modulate the electronic structure of Pd and thus help to boost the catalytic properties. However, one-pot synthesis of such nanohybrids remains a great challenge due to the distinct physiochemical properties of Pd, P and C components. Herein, we demonstrate a one-pot and scalable synthesis of highly dispersed PdP alloy nanoparticle-immobilized on N-doped graphitic carbon nanosheets (abbreviated as Pd-P@N-C nanosheets) by using inorganic-organic hybrid cyanogel as a reaction precursor. In virtue of both compositional and structural advantages, the as-synthesized Pd-P@N-C nanosheets manifest a superior catalytic activity and stability toward the hydrogenation of 4-nitrophenol (4-NP). We believe that the present work will provide a feasible and versatile strategy for the development of efficient catalysts for environmental remediation and can also be extendable to other carbon-based nanohybrids with desirable functionalities. (C) 2016 Elsevier B.V. All rights reserved.
Size-controllable Palladium Nanoparticles Immobilized on Carbon Nanospheres for Nitroaromatic Hydrogenation

Yong-Ming Lu,Hai-Zhou Zhu,Wei-Gu Li,Bo Hu,Shu-Hong Yu

DOI: https://doi.org/10.1039/c3ta00159h

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:In this paper, monodisperse Pd nanocrystals were immobilized on previously reported carbon nanospheres via in situ adsorption and reduction. In this protocol, no excess reductant and capping reagents were necessary, which made the surface of the as-prepared nanocatalysts very clean. Using sodium tetrachloropalladate(II) as the metal precursor yielded palladium nanocrystals with a size around 5 nm regardless of the metal loading, while the use of palladium chloride resulted in a size increase to 18.1 nm. Moreover, the additives used during preparation have been proven to be of great importance in controlling the average particle size. It was suggested that the pattern of the adsorbed palladium ions or the surface environment of support was greatly influenced. Strong adsorption of the palladium ions on the carbon spheres led to a decrease in size. The nanocrystals exhibited excellent catalytic activity for transfer hydrogenation under ambient conditions. The conversion was 83.1% to 100% for several nitroaromatics with moderate to excellent selectivity. More importantly, these nanocatalysts are promising for renewable catalysis owing to their sustainable support, green catalyst fabrication and ease of handling.
Ultrafine Palladium Nanoparticles Deposited on Ni, N Co-Doped Carbon to Boost Dehydrogenation Efficiency of Perhydro-N-Phenylcarbazole

Linsen Li,Zhuwei Yang,Xiao Yang,Hui Xiong,Zhao Jiang,Tao Fang

DOI: https://doi.org/10.1016/j.cej.2024.152089

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Liquid organic hydrogen carriers (LOHCs) are considered as promising candidates for large-scale hydrogen storage, which offers significant advantages in terms of hydrogen storage density, ease of storage and transportation. NPhCZ (N-phenylcarbazole)/18H-NPhCZ (perhydro-N-phenylcarbazole) is proposed as a typical system with high hydrogen storage capacity. However, low dehydrogenation activity and selectivity of catalysts restrict the cyclic efficiency of hydrogen storage. In this study, the efficient catalysts are designed by the immobilization of ultrafine, highly dispersed Pd nanoparticles onto Ni, N co-doped carbon materials through wet chemical reduction. The Pd/Ni@NC-10 catalyst exhibits the highest catalytic performance with 100 % conversion, 81.9 % selectivity of NPhCZ and 6.48 wt% hydrogen release amount. Combined with XRD, HRTEM, Raman, XPS, H2-TPR, 2-TPR, N2 2 physisorption characterization methods and DFT calculations, it is found that the doped Ni, N species could synergistically increase the dispersion of loaded Pd nanoparticles, as well as regulate the electronic state around Pd, which in turn accelerates the rate of the rate-limiting step. The evident interaction between Pd nanoparticles and Ni, N co-doped carbon brings the enhancement of dehydrogenation efficiency. Besides, the spent catalysts are measured by XRD, TEM, XPS and evaluated for the dehydrogenation reaction, indicating that Pd/Ni@NC-10 shows good structural stability, durability and recyclability. It provides practical guidance for the design of LOHCs dehydrogenation catalysts.
In Situ-Generated Co0-Co3O4/N-Doped Carbon Nanotubes Hybrids As Efficient and Chemoselective Catalysts for Hydrogenation of Nitroarenes

Zhongzhe Wei,Jing Wang,Shanjun Mao,Diefeng Su,Haiyan Jin,Yihe Wang,Fan Xu,Haoran Li,Yong Wang

DOI: https://doi.org/10.1021/acscatal.5b00737

IF: 12.9

2015-01-01

ACS Catalysis

Abstract:The earth-abundant nanohybrids Co-0/Co3O4@N-doped carbon nanotubes were fabricated via an efficient thermal condensation of D-glucosamine hydrochloride, melamine, and Co-(NO3)(2)center dot 6H(2)O. The hybrids furnish excellent catalytic activity and perfect chemoselectivity (>99%) for a wide range of substituted nitroarenes (21 examples) under relatively mild conditions. The high catalytic performance and durability is attributed to the synergistic effects between each component, the unique structure of graphene layers-coated Co-0, and the electronic activation of doped nitrogen. Density functional calculations indicate that the inner Co-0 core and N species on the carbon shell can significantly decrease the dissociation energies of H-2, giving evidence of the ability of carbon shell in the hybrids to enable H-2 activation. These results open up an avenue to design more powerful low-cost catalysts for industrial applications.
Highly Efficient Hydrogenation of Nitroarenes by Co Nanoparticles Encapsulated in N-doped Carbon Nanotubes under Mild Conditions

Zan Zhang,Yuan Liu,Jinfeng Du,Yisen Jiang,Zhaoxu Wang,Ruirui Yun,Baishu Zheng

DOI: https://doi.org/10.1039/d3qi01847d

IF: 7.779

2023-10-21

Inorganic Chemistry Frontiers

Abstract:Rational design and construction of heterogeneous non-noble metal catalysts with high-performance are greatly needed in practical applications such as selective hydrogenation of nitro aromatics. In this work, we developed a new type of cobalt-based catalyst, in which Co nanoparticles (NPs) are encapsulated in porous N-doped carbon nanotubes (Co@NCT) to achieve high efficiency, low cost and excellent durability. The Co nanoparticles could greatly improve the catalytic activity by adjusting the electron cloud distribution. Co@NCT-800 exhibits excellent activity, chemo-selectivity and recyclability for converting 14 nitro compounds into desired amines through hydrogenation using hydrazine hydrate as the reduction agent under mild conditions (25 °C, 20 min, 1 atm). In addition, taking reducing nitrobenzene into aniline as the model reaction, the hydrogenation mechanism was systematically investigated by density functional theory (DFT) calculations.

chemistry, inorganic & nuclear
Three-dimensional hydrophobic porous organic polymers confined Pd nanoclusters for phase-transfer catalytic hydrogenation of nitroarenes in water

Qiang Song,Wei David Wang,Ka Lu,Feng Li,Bin Wang,Limin Sun,Jiangang Ma,Hanghang Zhu,Boyang Li,Zhengping Dong

DOI: https://doi.org/10.1016/j.cej.2021.128856

IF: 15.1

2021-07-01

Chemical Engineering Journal

Abstract:<p>Fabrication of catalysts based on metal nanoclusters has attracted intensive research attention due to their superior catalytic activity. Herein, two three-dimensional hydrophobic porous organic polymers (3D-HPOPs-1 and 3D-HPOPs-2, respectively) that exhibited high specific surface areas and unique microporous-mesoporous structures were fabricated. Ultrafine Pd nanoclusters were successfully confined into the N atoms containing cages of 3D-HPOPs via impregnation and subsequent reduction. Besides, the 3D-HPOPs exhibited excellent hydrophobicity, thus can preferentially adsorb and enrich organic reactants in the pores of the catalyst, this in turn leads to the catalytic reaction as only in the organic phase. High conversion and selectivity were observed for the catalytic hydrogenation of nitroarenes over as-obtained Pd(0.7%)@3D-HPOPs-1 in water under mild reaction conditions. Moreover, the prepared catalyst can be easily recovered and reused without loss of activity. This study may provide a feasible strategy for fabricating noble-metal-nanocluster-based catalysts for various reactions under mild and environmentally friendly conditions.</p>

engineering, chemical, environmental
Synthesis of 3D N-doped Graphene/carbon Nanotube Hybrids with Encapsulated Ni NPs and Their Catalytic Application in the Hydrogenation of Nitroarenes

Yanyan Sun,Xuewen Li,Zhongshun Cai,Hongzhen Bai,Guping Tang,Zhaoyin Hou

DOI: https://doi.org/10.1039/c8cy01145a

IF: 6.177

2018-01-01

Catalysis Science & Technology

Abstract:A Ni@N-CNTs-GS catalyst prepared via pyrolysis is shown to be active and stable for the hydrogenation of nitroarenes to anilines via a direct route.
Nanostructured and recyclable palladium catalysts for hydrogenation of nitroarenes

Yin Wang,Xiaopeng Min

DOI: https://doi.org/10.26434/chemrxiv-2024-hsq64

2024-09-23

Abstract:This work reported the preparation of nanostructured palladium (Pd)-based catalysts that consisted of a magnetic core covered by a layer of functionalized mesoporous silica with Pd nanoparticles grown in situ within the porous channels (Fe3O4@mSiO2-Pd). The optimum Fe3O4@mSiO2-Pd with fine size and uniformly dispersed Pd nanoparticles was obtained on the amino (-NH2) functionalized magnetic mesoporous silica support with Na2PdCl4 as the Pd source. The performance of the synthesized Fe3O4@mSiO2-Pd was evaluated in the catalytic reduction of nitroarenes in aqueous solution with H2(g) as a reducing agent under ambient pressure and temperature. Compared with commercial Pd/SiO2, Fe3O4@mSiO2-Pd exhibited significantly improved reactivity in the reduction of various nitroarenes, which were completely reduced to the corresponding aminoarenes. The enhanced performance of Fe3O4@mSiO2-Pd may be attributed to the formation of small and well dispersed Pd nanoparticles within the confined support and the enhanced accessibility of reactive Pd sites within the mesoporous structure. Furthermore, the Fe3O4@mSiO2-Pd catalyst also showed excellent reusability and could be easily collected by an external magnetic field. Results suggested that the synthesized Fe3O4@mSiO2-Pd can be an effective and sustainable catalyst for hydrogenation of nitro-containing compounds.

Chemistry
Pyridinic nitrogen dominated doping on Pd/carbon catalysts for enhanced hydrogenation performance

Limin He,Yangdong Wang,Can Wang,Zhicheng Liu,Zaiku Xie

DOI: https://doi.org/10.3389/fchem.2022.1046058

IF: 5.5

2022-11-03

Frontiers in Chemistry

Abstract:The hydrogenation of 4-carboxylbenzaldehyde over Pd catalysts is a crucial process during the production of pure terephthalic acid. Herein, ZIF-8 derived carbon materials (NC) with adjustable N types were synthesized and used as the supports of Pd catalysts. Pd supported on NC with 50.5% of pyridinic N exhibited best hydrogenation activity with a TOF value of 4.1 min −1 . The microstructures of NC support and electronic structures of Pd in Pd/NC were investigated by techniques such as XRD, N 2 physisorption, XPS, H 2 -O 2 titration and TEM. The nitrogen species in CN surface not only can adjust chemical state and dispersion of Pd nanoparticles (NPs), but also promote the adsorption and activation capability of H 2 molecular. Besides, the ratio of Pd 0 /Pd 2+ and Pd dispersion were closely correlated with pyridinic nitrogen content. The improvement in hydrogenation activity and stability of Pd/CN catalyst in relative to Pd/C were ascribed to the synergistic effect of pyridinic nitrogen and active site Pd 0 .

chemistry, multidisciplinary
Ni Nanoparticles supported on N-doped carbon nanotubes for efficient hydrogenation of C5 hydrocarbon resins under mild conditions

Qiaolu Wei,Xiaopeng Chen,Yaojing He,Jiawei Fu,Jiezhen Liang,Xiaojie Wei,Linlin Wang

DOI: https://doi.org/10.1016/j.micromeso.2022.111727

IF: 5.876

2022-03-01

Microporous and Mesoporous Materials

Abstract:The catalytic hydrogenation of hydrocarbon resins to high value-added products represents a prospective technology to upgrade the pyrolysis gasoline byproduct, while pore diffusion is challenging. Herein, Ni nanoparticles supported on nitrogen-doped carbon nanotubes (Ni/NCNTs) were designed and synthesized via an impregnation method. The as-prepared Ni/NCNTs exhibit superior hydrogenation of large molecular C5 hydrocarbon resins (C5HR) catalytic activity under mild conditions relative to that reported by literature, and the degree of hydrogenation (DH) for C5HR with a water-white appearance reach up to 95.5%. Combined with the BET, TEM, XPS, H2-TPR analysis results, the catalytic performance of Ni/NCNTs catalyst could ascribe to that the unique structure of NCNTs carrier provides a more accessible surface area that accounts for 88.1% of the specific surface area to expose abundant active sites, and small nickel nanoparticle sizes (less than 10 nm). Additionally, Ni/NCNTs exhibit higher stability for C5HR hydrogenation than Ni/CNTs catalyst, which attributes to the efficient anchor ability of N defect and the formation of Ni–N units.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied

Pd-doped Ni Nanoparticle-Modified N-doped Carbon Nanocatalyst with High Pd Atom Utilization for the Transfer Hydrogenation of Nitroarenes

Ultrafine Pd Nanoparticles Anchored on Nitrogen-Doping Carbon for Boosting Catalytic Transfer Hydrogenation of Nitroarenes

Palladium Nanoparticles Supported on Nitrogen-Functionalized Active Carbon: A Stable and Highly Efficient Catalyst for the Selective Hydrogenation of Nitroarenes

Nickel–platinum Nanoparticles Immobilized on Graphitic Carbon Nitride As Highly Efficient Catalyst for Hydrogen Release from Hydrous Hydrazine

Pd Supported on G-C3n4 Nanosheets: Mott–Schottky Heterojunction Catalyst for Transfer Hydrogenation of Nitroarenes Using Formic Acid As Hydrogen Source

Trace Iron Impurities Deactivate Palladium Supported on Nitrogen-Doped Carbon Nanotubes for Nitrobenzene Hydrogenation

Highly dispersed Ni nanocatalysts supported by MOFs derived hierarchical N-doped porous carbon for hydrogenation of dicyclopentadiene

In Situ Encapsulated Ultrafine Pd Nanoparticles in Nitrogen-Doped Porous Carbon Derived from Hyper-Crosslinked Polymers Effectively Catalyse Hydrogenation

Pd Atomic Engineering of Nanoporous Ni/NiO for Efficient Nitrophenol Hydrogenation Reaction

Ni@Pd Core-Shell Nanoparticles Supported on A Metal-Organic Framework As Highly Efficient Catalysts for Nitroarenes Reduction

NiPt Nanoparticles Anchored Onto Hierarchical Nanoporous N-Doped Carbon As an Efficient Catalyst for Hydrogen Generation from Hydrazine Monohydrate.

Cyanogel-Derived N-Doped C Nanosheets Immobilizing Pd-P Nanoparticles: One-Pot Synthesis and Enhanced Hydrogenation Catalytic Performance

Size-controllable Palladium Nanoparticles Immobilized on Carbon Nanospheres for Nitroaromatic Hydrogenation

Ultrafine Palladium Nanoparticles Deposited on Ni, N Co-Doped Carbon to Boost Dehydrogenation Efficiency of Perhydro-N-Phenylcarbazole

In Situ-Generated Co0-Co3O4/N-Doped Carbon Nanotubes Hybrids As Efficient and Chemoselective Catalysts for Hydrogenation of Nitroarenes

Highly Efficient Hydrogenation of Nitroarenes by Co Nanoparticles Encapsulated in N-doped Carbon Nanotubes under Mild Conditions

Three-dimensional hydrophobic porous organic polymers confined Pd nanoclusters for phase-transfer catalytic hydrogenation of nitroarenes in water

Synthesis of 3D N-doped Graphene/carbon Nanotube Hybrids with Encapsulated Ni NPs and Their Catalytic Application in the Hydrogenation of Nitroarenes

Nanostructured and recyclable palladium catalysts for hydrogenation of nitroarenes

Pyridinic nitrogen dominated doping on Pd/carbon catalysts for enhanced hydrogenation performance

Ni Nanoparticles supported on N-doped carbon nanotubes for efficient hydrogenation of C5 hydrocarbon resins under mild conditions