Abstract:The objective of this research was to convert xylose into furfural using flax straw‐based bifunctional solid acid catalyst. The catalyst was synthesized by impregnation‐carbonization and sulfonation processes. The characterization of biochar, Al‐biochar, and sulfonated Al‐biochar catalyst were carried out by using Brunauer–EmmetTeller (BET), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). The results showed that the surface area, total acid density, and SO 3 H density of sulfonated Al‐biochar catalyst were 516.03 m 2 /g, 4.767 ± 0.23 mmol/g and 1.033 ± 0.1 mmol/g, respectively. The result of FTIR indicated that the presence of the different functional groups such as the phenolic group (‐OH), carboxylic group (‐COOH), sulfoxide group (‐SO 3 H), and Al‐O‐Al on the surface of the prepared catalyst. The catalytic performance of the synthesized catalyst was evaluated in a biphasic system of water and 2‐methyl tetra hydro furan. The effects of dehydration reaction parameters (reaction temperature, reaction time, and catalyst loading) on the formation of furfural were also studied. The maximum furfural formation was obtained at 180°C, 2 hr, and 0.2 gm of catalyst loading. Under this condition, the yield of furfural was around 64.7%, with a selectivity of 88.0%. The study demonstrated the effectiveness of the catalyst in the transformation of xylose into furfural.

Catalytic Conversion of Corn Stover into Furfural over Carbon-based Solid Acids

Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

Fenton Reaction-Modified Corn Stover to Produce Value-Added Chemicals by Ultralow Enzyme Hydrolysis and Maleic Acid and Aluminum Chloride Catalytic Conversion

Efficient catalytic conversion of corn stover to furfural and 5-hydromethylfurfural using glucosamine hydrochloride derived carbon solid acid in Ƴ-valerolactone

Efficient Conversion of Xylose and Corncob to Furfural Using a Novel Carbon-Based Solid Acid Derived from Black Liquor Lignin-Tin Complexes

Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone

Synthesis of Sulfonated Hierarchical Carbons and Theirs Application on the Production of Furfural from Wheat Straw

Efficient Transformation of Corn Stover to Furfural Using P-Hydroxybenzenesulfonic Acid-Formaldehyde Resin Solid Acid.

Conversion of Xylose to Furfural Catalyzed by Carbon-Based Solid Acid Prepared from Pectin

Preparation of Rice Husk Carbon-Based Solid Acid Catalyst for the Dehydration of Xylose to Furfural

A Feasible Process for Furfural Production from the Pre-Hydrolysis Liquor of Corncob Via Biochar Catalysts in a New Biphasic System

Production of 5-Hydroxymethylfurfural from Corn Stalk Catalyzed by Corn Stalk-Derived Carbonaceous Solid Acid Catalyst

Production of Furfural with High Yields from Corncob under Extremely Low Water/solid Ratios

Carbon-Based Solid Acid Pretreatment in Corncob Saccharification: Specific Xylose Production and Efficient Enzymatic Hydrolysis

Efficient conversion of corn stover to 5-hydroxymethylfurfural and furfural using a novel acidic resin catalyst in water-1, 4-dioxane system

Kinetics of Furfural Production from Corn Cob in γ-Valerolactone Using Dilute Sulfuric Acid as Catalyst

Production of furfural from xylose, water-insoluble hemicelluloses and water-soluble fraction of corncob via a tin-loaded montmorillonite solid acid catalyst.

Synthesis of Furfural from Xylose Using Carbon‐Based Bifunctional Solid Acid Catalyst in the Biphasic System

Sulfonic polymer catalysts for converting of furfural to high-value chemicals

Catalytic conversion of corncob and corncob pretreatment hydrolysate to furfural in a biphasic system with addition of sodium chloride

Catalytic Hydrothermal Pretreatment of Corncob into Xylose and Furfural Via Solid Acid Catalyst.