Abstract:Flow-through bioreactors are utilized in tissue regeneration to ensure complete nutrient distribution and apply defined hydrodynamic stresses. The fundamental concepts in designing these bioreactors for regenerating large high aspect ratio tissues (large surface area relative to the thickness of the matrix such as skin, bladder, and cartilage) are not well defined. Further, tissue regeneration is a dynamic process where the porous characteristics change due to proliferation of cells, de novo deposition of matrix components, and degradation of the porous architecture. These changes affect the transport characteristics and there is an imminent need to understand the influence of these factors. Using computational fluid dynamic tools, changes in the pressure drop, shear stress distribution and nutrient consumption patterns during tissue regeneration were assessed in rectangular and circular reactors described by Lawrence et al. [Biotechnol Bioeng 2009;102(3):935-947]. Further, six new designs with different inlet and outlet shapes were analyzed. The fluid flow was defined by the Brinkman equation on the porous regions using the pore characteristics of 85 microm and 120 pores/mm(2). The minimum flow requirements to satisfy nutrient (oxygen and glucose) requirements for three different cell types (SMCs, chondrocytes, and hepatocytes) was evaluated using convective diffusion equation. For consumption reaction, the Michaelis-Menten rate law was used, with constants (k(m) and v(m) values) extracted from literature. Simulations were performed by varying the flow rate as well as the cell number. One of the circular reactors with semicircular inlet and outlet shape decreased (i) non-uniformity in hydrodynamic stress within the porous structure and (ii) non-uniform nutrient distribution. All cell types showed increased consumption of oxygen than glucose. Hepatocytes needed a very high flow rate relative to other cell types. Increase in cell number suggested a need for increasing the flow in circular reactors.

Fluid Dynamic Characterization of a Fluidized‐bed Perfusion Bioreactor with CFD–DEM Simulation

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Fluidization Dynamics in an Impinging-jet-driven Bioreactor for Artificial Liver System

Design and Evaluate of a Multilevel Laminar Shear Stress Perfusion Bioreactor

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

A New Fluidized Bed Bioreactor Based On Diversion-Type Microcapsule Suspension For Bioartificial Liver Systems

Fluid Dynamics Analysis of a Novel Micropatterned Cell Bioreactor.

COMPUTATIONAL FLUID DYNAMICS FOR TISSUE ENGINEERING APPLICATIONS

CFD Studies on Hydrodynamic Characteristics of Shaking Bioreactors with Wide Conical Bottom

Prediction and Simulation on the Shear Stress and Mass Transfer in Perfused Bioreactors I: Circular Bioreactors

A Combined Computational-Fluid-dynamics Model and Control Strategies for Perfusion Bioreactor Systems in Tissue Engineering

Computational fluid dynamics simulation of hydrodynamics in an internal-loop fluidized bed reactor with a funnel-shaped internal

Prediction And Simulation On The Shear Stress And Mass Transfer In Perfused Bioreactors Ii: Effect Of Feed Mode And Bioreactor Geometry

Fluid Dynamics of Flow Fields in a Disposable 600-Ml Orbitally Shaken Bioreactor

Experiments and a three‐phase computational fluid dynamics (CFD) simulation coupled with population balance equations of a stirred tank bioreactor for high cell density cultivation

Modeling nutrient consumptions in large flow-through bioreactors for tissue engineering

Numerical Simulation of Oxygen Distribution in a Cardiac Tissue Constructed in a Perfusion Bioreactor

Computational fluid dynamics modeling of an inverted frustoconical shaking bioreactor for mammalian cell suspension culture

DEM--CFD modeling and simulations of hydrodynamic characteristics and flow resistance coefficient in fixed-bed reactors

Global Sensitivity Analysis for a Perfusion Bioreactor Based on CFD Modelling.