Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

Efficient Predictive Control Of Pmsm Drives Fed By 3l-Npc Power Converters: A Cyber Physical System Approach

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Computationally Efficient Predictive Control of Grid-Tied Three-Level NPC Active-Front-ends: A CPS Based Solution

Neural-Network-Based Predictive Control for PMSM Drives

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

Robust Predictive Control of 3L-NPC Converter Fed PMSM Drives for Electrical Car Applications

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

A High-efficiency PMSM Sensorless Control Approach Based on MPC Controller

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Finite-Control-Set Model Predictive Control of Permanent Magnet Synchronous Motor Drive Systems—An Overview

Data-Enabled Finite State Predictive Control for Power Converters Via Adaline Neural Network

A Novel Finite-Set Sliding-Mode Model-Free Predictive Current Control for PMSM Drives Without DC-Link Voltage Sensor

FPGA Based Direct Model Predictive Current Control of PMSM Drives with 3L-NPC Power Converters

A Novel Constrained Model Predictive Position Control for PMSM Drives

Computationally Efficient Cascaded Predictive Control for Hybrid-Inverter Fed Open-Winding PMSM Drive with Fast Partial Preselection

Predictive Position Control with System Constraints for PMSM Drives Based on Geometric Optimization.

A Novel Multi-Objective Finite Control Set Model Predictive Control for IPMSM drive fed by a Five-Level Cascaded H-Bridge Inverter

Interleaved Model Predictive Control for Three-Level Neutral-Point-Clamped Dual Three-Phase PMSM Drives with Low Switching Frequencies

Model Predictive Current Control Of Three-Level Npc Back-To-Back Power Converter Pmsg Wind Turbine Systems

Model Predictive Control for Permanent Magnet Synchronous Motor Drives Considering Cross-Saturation Effects