Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Undercoordinated Site-Abundant and Tensile-Strained Nickel for Low-Temperature COx Methanation

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Excellent Behaviors of Highly Dispersed Ni-based Catalyst in CO Methanation Synthesized by In-Situ Hydrothermal Method with Carbon Quantum Dots Assisted

Regulation of Metal Utilization Ratio and Active Sites of Nickel Phyllosilicates for Enhanced Co2 Methanation

Alkaline-assisted Ni nanocatalysts with largely enhanced low-temperature activity toward CO2 methanation

CO2 Methanation over CoNi Bimetal-Doped Ordered Mesoporous Al2O3 Catalysts with Enhanced Low-Temperature Activities

Simultaneously Quantitative and Qualitative Regulation of Active Sites of Ni-Phyllosilicate for Enhanced Co2 Hydrogenation to Methane

Simultaneously quantitative and qualitative regulation of active sites of Ni-phyllosilicate for enhanced CO 2 hydrogenation to methane

A Ni-based Catalyst with Enhanced Ni–support Interaction for Highly Efficient CO Methanation

Three-dimensional porous Mn–Ni/Al2O3 microspheres for enhanced low temperature CO hydrogenation to produce methane

Large-pore Mesoporous RuNi-doped TiO2–Al2O3 Nanocomposites for Highly Efficient Selective CO Methanation in Hydrogen-Rich Reformate Gases

Preparation of Highly Dispersed Supported Ni-Based Catalysts and Their Catalytic Performance in Low Temperature for CO Methanation

Cobalt-doped Ni-based catalysts for low-temperature CO 2 methanation

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

A High Loaded Catalyst of Highly Dispersed Nickel Species on Acid-Treated Mesoporous Clay Layers for Efficient CO and CO2 Methanation

Bimetallic Ni-Co nanoparticles on SiO2 as robust catalyst for CO methanation: Effect of homogeneity of Ni-Co alloy

Clarification of Active Sites at Interfaces Between Silica Support and Nickel Active Components for Carbon Monoxide Methanation

Lattice Strained Ni-Co alloy as a High-Performance Catalyst for Catalytic Dry Reforming of Methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Enhanced Photo‐Thermal CO2 Methanation with Tunable RuxNi1‐x Catalytic Sites: Alloying Beyond Pure Ru

Oxygen Vacancies Coupled with Surface Silicide Facilitate the CO2 Activation at Near-Room Temperature for Efficient Methane Productivity on Ni-Oxide Supported Pd Nanoparticles