Abstract:The local heat transfers of a thermally developing region in a rectangular channel filled with porous metal foam are investigated experimentally. A thin metal foil technique and thermal IR imaging are adopted for the measurement of the local temperature distribution. An open-cell metal foam made from copper having a porosity of 0.96 is used. The pore density of the foam is 30 PPI (pores per inch). Fluid flow characteristics like permeability and foam drag coefficient are measured by conducting local pressure drop experiments. Additionally, by utilizing local pressure measurement data, the non-dimensional pressure coefficient is quantified. The non-dimensional pressure coefficient increases in the streamwise direction, irrespective of the Reynolds number, and remains almost constant in the spanwise direction for Reynolds numbers greater than 2000. The effect of the metal foam thickness on local heat transfer and pressure drop is investigated for 13 and 20 mm thick porous metal foam. It is compared with a smooth channel to quantify the heat transfer augmentation in a channel filled with metal foam. Compared to a smooth channel, the channel with 20 mm thick metal foam shows 14 to 25 times augmentation in the Nusselt number. Similarly, the channel with 13 mm foam shows 10 to 15 times augmentation in Nusselt number. The increasing trend of the local Nusselt number is observed in a streamwise direction. The different criteria are studied to understand the thermal performance evaluation. In the Constant Pumping Power Criterion (CPPC), enhancements ranged from 3.14 to 6.72 for a 20 mm thickness and 2.62 and 4.34 for a 13 mm foam thickness. Similarly, in the Performance Evaluation Criterion (PEC), enhancement ranges from 2.23 to 4.83 for a 20 mm foam thickness and 1.89 to 3.16 for a 13 mm foam thickness. A generalized correlation is suggested to describe the average Nusselt number considering the foam material, foam thickness, pore density, and porosity as parameters.

Pore-level Determination of Spectral Reflection Behaviors of High-Porosity Metal Foam Sheets

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Effect analysis of edge layers on volumetric radiative properties of nickel foams

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

3D visualized characterization of radiation energy transport in a real semitransparent foam strut under high irradiation beam

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

Numerical Study on Fluid Flow Behavior and Heat Transfer Performance of Porous Media Manufactured by a Space Holder Method

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Identification of spectral radiative properties of closed cell polymeric foams using coupled Monte Carlo-particle swarm optimization

Modeling and Prediction of the Effective Thermal Conductivity of Random Open-Cell Porous Foams

Pore-scale Simulation of Forced Convection Heat Transfer in Metal Foams with Uniform and Gradient Structures

A new method for calculating the specific surface area of porous metal foams

Analysis of the Heat Transfer in Electronic Radiator Filled with Metal Foam

Thermal conductivity of closed-cell aluminum foam based on the 3D geometrical reconstruction

Numerical analysis on the effect of graded porosity in closed-cell metal foams/PCM composites

On the Hydrodynamics of Macroporous Structures: Experimental, CFD and Artificial Neural Network Analysis

Local heat transfer distribution of thermally developing region in a rectangular open-cell metal foamed channel

Reflectance According to Cell Size, Foaming Ratio and Refractive Index of Microcellular Foamed Amorphous Polymer

Review and a Theoretical Approach on Pressure Drop Correlations of Flow through Open-Cell Metal Foam