Abstract:According to the third-order simplified dynamic model of doubly-fed induction generator(DFIG),an equivalent method of DFIG wind farm based on the Thevenin circuit(EMBTC)is proposed.Firstly,based on the characteristics of mechanical power and rotor speed curve of wind turbine,a faster power flow calculation of power system with wind farm is carried on to determine the initial states of DFIGs.Then,off-line calculation is made to find the upper and down limits of injected wind speed when dynamical characteristics of transient electromotive force change evidently.The DFIGs in the wind farm are clustered according to the dynamic similarities.Secondly,the transient electromotive force buses of DFIGs in one group are aggregated to an equivalent bus through ideal transformers with complex ratios.Parameters of the equivalent DFIG are identified with a similar method of synchronous generators.According to the energy conservation law and a presumed mechanical power and rotor speed characteristics of the equivalent DFIG,the equivalent wind speed and the rotor speed are obtained.Finally,network reduction is accomplished by the elimination of phase shifting transformers,which determines the electrical connections between equivalent DFIG and the point of common coupling.Simulation results of an example wind farm with six DFIGs show that one-DFIG equivalent model has a high steady accuracy while the dynamical accuracy is relatively low.The dynamic precision can be effectively improved when three-DFIG equivalent model are utilized.The EMBTC is suitable for wind farms with complex connections and various wind speeds.

Simplified Method of Doubly Fed Induction Generator

Phase–amplitude Model for Doubly Fed Induction Generators

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Simplified Model of Doubly Fed Induction Generator in Normal Operation

Direct Power Control of Doubly Fed Induction Generator under Distorted Grid Voltage

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Multiple Target Implementation for A Doubly Fed Induction Generator Based on Direct Power Control under Unbalanced and Distorted Grid Voltage

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Doubly Fed Induction Wind Generator Model and Its Operation Investigation

Modeling and Simulation of Power Controller for the Doubly Fed Induction Generator Wind Turbines

Study on Modeling and Simulation of Double-Fed Induction Wind Power Generator Control System

Research on AC-DC-AC Converter for Wind Power Doubly-Fed Induction Generator

Wind Power Grid-connected Control for Synchronized Doubly Fed Induction Generator

Simulation Research on Vector Control Strategy with Feedforward Compensation of Doublly-fed Induction Generator

Magnitude and Frequency Control of Grid-Connected Doubly Fed Induction Generator Based on Synchronised Model for Wind Power Generation