Abstract:Based on the photoelastic effect, a microtapered long-period fiber grating (MLPFG) is fabricated by using a CO2 fusion splicer, which has high repeatability and small loss. By analyzing the spectrum of the grating, it is easy to know that the grating has a significant absorption effect only for light with a specific wavelength (such as λ≈1569 nm). In the process of fabrication, it is found that with the increase of refractive index modulation, the extinction ratio of the spectrum increases gradually, and the resonant dip drifts toward the long wavelength. In addition, it is found that the twist direction and the torsion angle of the grating can be judged by observing the change of the spectrum in the experiment of exploring the sensing of torsion. When the grating is twisted clockwise, wavelength and extinction ratio of the resonant dip decrease gradually; when the grating is twisted counterclockwise, the wavelength increases gradually, but the extinction ratio increases first and then decreases. The torsion sensitivity is 0.10 nm · mm · rad−1, which is about two times higher than that of CLPGs fabricated from photonic crystal fibers and about three times higher than that of conventional LPFGs. By utilizing these characteristics of MLPFG, it can be widely used in filters and sensors.

Fabrication Of Microtapered/Helical Long-Period Fiber Gratings With A Co2 Laser Fusion Splicer

Novel Long-Period Fiber Gratings: Fabrication and Sensing Applications

Online and Efficient Fabrication of Helical Long-Period Fiber Gratings

Highly Strain and Bending Sensitive Microtapered Long-Period Fiber Gratings

Fabrication of Twisted Long Period Fiber Gratings with High Frequency Co2 Laser Pulses and Its Bend Sensing

Technique fabricating long period fiber gratings by high-frequency CO2 laser pulses

Online Fabrication Scheme of Helical Long-Period Fiber Grating for Liquid-Level Sensing.

A Technique Fabricating Long Period Fiber Gratings by High-Frequency CO2 Laser Pluses

Long Period Fiber Gratings Inscribed by Periodically Tapering a Fiber

Fabrication and Characterization of Femtosecond Laser Inscribed Long-Period Fiber Grating in Few-Mode Fiber

A Novel Method for Fabrication of Long Period Fiber Grating with CO2 Laser

Long Period Fiber Gratings Inscribed With an Improved Two-Dimensional Scanning Technique

Long Period Fiber Grating Fabrication by Two-Step Infrared Femtosecond Fiber Laser Exposure

Sensing Characterization of Helical Long Period Fiber Grating Fabricated by a Double-Side CO 2 Laser in Single-Mode Fiber

Study on Fabrication, Spectrum and Torsion Sensing Characteristics of Microtapered Long-Period Fiber Gratings

Theory and Fabrication of Long Period Fiber Grating with Rotary Refractive Index Modulation Induced by CO2 Laser Pulses

Asymmetric Long Period Fiber Gratings Fabricated by Use of Co2 Laser to Carve Periodic Grooves on the Optical Fiber

Long-Period Fiber Gratings For Low-Cost Sensing

Femtosecond laser fabrication of long period fiber gratings by a transversal-scanning inscription method and the research of its orientational bending characteristics

CO2 laser-written long-period fiber grating with a high diffractive order cladding mode near the turning point