Abstract:Magnetostrictive Fe-Ga alloys, featuring with good machinability, high Curie temperature, and high permeability, have received increasing attention in fields such as actuators, implants, and energy harvesting. Unfortunately, bulk polycrystalline Fe-Ga alloys usually suffer poor magnetostrictive strains compromised by the randomness of grain structure and the intricate phase constitution. The current study was centered on the fabrication of bulk polycrystalline Fe81Ga19 alloys with tailored grain morphology and phase arrangement utilizing laser-beam powder bed fusion (LPBF) technology. Particular emphasis was laid on investigating the repercussions of LPBF process parameters on the microstructure and magnetostrictive performance. The findings illustrated a non-linear interplay between laser power and the relative density of laser powder bed fusion-fabricated (LPBFed) Fe81Ga19 alloys, marked by an initial augmentation followed by a subsequent decrement. Similarly, a consistent trend was observed for the LPBFed alloys at varying scan speeds. In particular, the LPBFed Fe81Ga19 alloys exhibited a highest density at optimized process parameters (laser power set at 120 W paired with a scan speed of 100 mm/s) due to suitable laser energy input during LPBF process. It was experimentally shown that elongated columnar grains and disorder A2 phase structures were obtained within the alloys attibutes to the high temperature gradient and rapid cooling kinetics intrinsic to LPBF, contributing to a desirable magnetostrictive strain of ~87 ppm for bulk polycrystalline Fe81Ga19 alloys. Moreover, a good dynamic magnetostrictive response of the LPBFed alloys was confirmed by the near-synchronous variations between magnetostrictive behavior and alternating magnetic fields. It can be derived from these findings that LPBF process may be a promising method to prepare bulk magnetostrictive Fe-Ga alloys for versatile applications.

Enhanced Magnetostriction of Fe81Ga19 by Approaching an Instable Phase Boundary

Depth-dependent decomposition and property of large magnetostriction Fe-Ga alloys

Evolution of nanoheterogeneities and correlative influence on magnetostriction in FeGa-based magnetostrictive alloys

Microstructural origin of the magnetostriction deterioration in slowly cooled Fe81Ga19

Giant enhancement of magnetostriction in Pt doped FeGa ribbons

Engineering new limits to magnetostriction through metastability in iron-gallium alloys

Improved magnetostriction in Galfenol alloys by aligning crystal growth direction along easy magnetization axis

Understanding Strong Magnetostriction in Fe100−xGax Alloys

Effects of phase transformation on the microstructures and magnetostriction of Fe-Ga and Fe-Ga-Zn ferromagnetic shape memory alloys

Anomalous phase transformation in magnetostrictive Fe81Ga19 alloy

Formation mechanism of tetragonal nanoprecipitates in Fe–Ga alloys that dominate the material's large magnetostriction

Morphology evolution and enhanced magnetostriction of (Fe0.81Ga0.19)99.9Tb0.1 crystals prepared by liquid metal cooling Bridgman directional solidification

Enhancing magnetostriction in FeAl alloys via crystal growth orientation tuning by a trace amount of Pt doping

Enhanced magnetostriction of rolled (Fe81Ga19)99.93Tb0.07 thin sheet by synergy strategy of secondary recrystallization and trace Tb-doping

Laser-beam powder bed fusion of magnetostrictive Fe 81 Ga 19 alloys: parameter optimization, microstructural evolution and magnetostrictive properties

Origin of Large Magnetostriction in Fega Alloys

Giant magnetostriction in Tb-doped Fe83Ga17 melt-spun ribbons

Giant heterogeneous magnetostriction induced by charge accumulation-mediated nanoinclusion formation in dual-phase nanostructured systems

Large-scale First-Principles Determination of Anisotropic Mechanical Properties of Magnetostrictive Fe–Ga Alloys

Magnetostructural phase transitions and magnetocaloric effect in Mn-Fe-Ni-Ge-B alloys

Phase structure and magnetostriction of Fe81Ga19 melt-spun ribbons