Abstract:An elastohydrodynamic lubrication line contact-vibration model is proposed to study the stiffness and damping of the oil film existed in the EHL contact region. An initial mutual approach between interacting surfaces, which deviates from the steady-state balanced position, is assumed under the free contact-vibration to predict the response of the mutual approach. An inertia term, which represents the acceleration of the gap motion, is added to the classical force balance equation to form the equation of motion of the mutual approach. Response of the mutual approach is solved based upon the solving of the contact-dynamic model. The oil stiffness is calculated according to the natural frequency of the response under damped and non-damped conditions, the latter of which represents dry contact conditions. The oil film damping is calculated in terms of the principle of the energy conservation which utilizes the whole history of response compared with the log decrement method. Effect of the normal load, the rolling speed and the amplitude of the regular sinusoidal surface waviness on the oil film stiffness, the contact stiffness and the oil film damping are studied. The study provides an insight on the oil film dynamic characteristics of lubricated contact-vibration problems which appear in gears, bearings, etc. The results show that the oil film damping factor decreases with the increasing normal load as well as the increasing rolling speed. The oil film stiffness increases with the normal load and decreases with the rolling speed. Also, compared to the contact stiffness, the oil film stiffness makes less contribution to the total stiffness. The surface waviness amplitude has little effect on the oil film stiffness and the oil film damping.

Oil Film Damping Analysis in Non-Newtonian Transient Thermal Elastohydrodynamic Lubrication for Gear Transmission

Effects of oil film stiffness and damping on spur gear dynamics

Oil film stiffness and damping in an elastohydrodynamic lubrication line contact-vibration

Investigation on Stiffness and Damping of Transient Non-Newtonian Thermal Elastohydrodynamic Point Contact for Crowned Herringbone Gears

The Influence of Oil Film Thickness on the Gear Impact Dynamics of Friction Disc

Thermal Elastohydrodynamic Lubrication Analysis For Point Contact Transmission

Numerical Analysis of Transient Elastohydrodynamic Lubrication of Helical Gears

An Improved Dynamic Transmission Error Model Applied on Coupling Analysis of Gear Dynamics and Elastohydrodynamic Lubrication

Spur Gear Lubrication Analysis with Dynamic Loads

Simulation and experiment on vibration of helical gear transmission considering EHD

Tribological and Thermal Properties of a Crowned Gear Pair with High-Speed and Heavy-Load in Thermal Micro-Elastohydrodynamic Lubrication

Micro Thermal Elastohydrodynamic Lubrication Analysis of Involute Helical Gears

Transient Thermal Lubrication Analysis of Involute Gear

A Numerical Solution to the Thermal Elastohydrodynamic Lubrication of Circular Arc Gears

Modeling and analysis of transient lubrication characteristic of the helicopter main transmission spiral bevel gears in point contacts

Lubrication Analysis and Wear Mechanism of Heavily Loaded Herringbone Gears with Profile Modifications in Full Film and Mixed Lubrication Point Contacts

Numerical Simulation of Transient Elastohydrodynamic Lubrication of Helical Gears

Analysis of Vibration Characteristic for Helical Gear under Hydrodynamic Conditions

Investigation on the influence of heat on the dynamic characteristics of a gear transmission system

Tribo-dynamic modelling and analysis for a high-speed helical gear system with time-varying backlash and friction under Elastohydrodynamic Lubrication condition

Nonlinear dynamic characteristics analysis method of planetary gear train torsional vibration considering meshing oil film force