Abstract:In the past few decades, several robust designs dealing with disturbances in batch processes have been developed. The previous methods hold the viewpoint that all disturbances are harmful because they may drive the trajectory off the nominal optimal trajectory and lead to economic loss and safety issues. Are disturbances definitely detrimental? Actually, from the economic viewpoint, not all the disturbances are unfavorable to operating batch processes. To utilize disturbances fully for the improvement of the economic performance, disturbances are first divided into favorable and unfavorable types in this paper. An alternate feedback control (AFC) method is proposed to switch the feedback gains according to the types of disturbances, holding favorable disturbances and rejecting unfavorable disturbances. As a result, AFC will lead to an asymmetrical distribution of the trajectory. It is quite different from conventional feedback control (CFC), which rejects both favorable and unfavorable disturbances and leads to a symmetrical distribution. Second, because disturbances are the source of the variation and state errors are the combination of the previous state errors, control inputs, and disturbances, a disturbance-based feedback scheme is developed for AFC in this paper. Unlike traditional error-based feedback whose feedback gain acts on the state errors, the feedback gains of AFC act on the disturbances directly. Finally, a design combining robust economic optimization and AFC regulation is proposed for economic performance improvement and quick implementation of the regulation. The parameters of the online AFC are given by the robust economic optimization. This design can avoid the mismatch between the optimization layer and the regulating layer. Additionally, there will not be any computational burden for the novel design since the difficult and complex problem can be done offline and then AFC is implemented online using the gains generated offline. The optimality and the potential applications of the proposed integrated design are demonstrated through a typical dynamic batch reactor process.

The Disturbance Rejection Design Based on Physical Feedforward for Solid Oxide Fuel Cell

Voltage and Fuel Utilization Control Strategy for Solid Oxide Fuel Cell Based on Active Disturbance Rejection Control

Feedforward and Desired Dynamic Equation Control for Solid Oxide Fuel Cell System.

Multiple Model Predictive Control for Oxygen Starvation Prevention of Fuel Cell System

Data-Driven Adaptive Extended State Observer-Based Model-Free Disturbance Rejection Control for DC–DC Converters

Disturbance-Based Alternate Feedback Control Scheme to Enhance Economic Performance of Batch Processes

A Combined Voltage Control Strategy for Fuel Cell

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

A Nonlinear Active Disturbance Rejection Feedback Control Method for Proton Exchange Membrane Fuel Cell Air Supply Subsystems

A Practical Compound Controller Design for Solid Oxide Fuel Cells

Multiple model predictive control for solid oxide fuel cells

Control Loop Design and Control Performance Study on Direct Internal Reforming Solid Oxide Fuel Cell

Optimal dual-model controller of solid oxide fuel cell output voltage using imitation distributed deep reinforcement learning

Optimal adaptive control for solid oxide fuel cell with operating constraints via large-scale deep reinforcement learning

Robust Adaptive Control of Interleaved Boost Converter for Fuel Cell Application

A novel data-driven controller for solid oxide fuel cell via deep reinforcement learning

An Optimization and Fast Load-Oriented Control for Current-Based Solid Oxide Fuel Cell System

Active Disturbance Rejection Control for Fuel Processing System of Fuel Cells

Robust Feedback Model Predictive Control of the Solid Oxide Fuel Cell's System

Constrained computationally efficient nonlinear predictive control of Solid Oxide Fuel Cell: Tuning, feasibility and performance