Abstract:Large-scale and high precision absolute distance measurement is essential in aerospace technology and advanced manufacturing. Traditional method of measuring distance cannot meet this requirement. Since the advent of optical frequency comb, it has brought a revolutionary breakthrough to absolute distance measurement. In the past decade, there were proposed many methods to measure long absolute distances with high accuracy. Especially, the simple method of using adjacent pulse-to-pulse distance as a ruler for distance measurement has been widely used. The accuracy of this method depends mainly on the knowledge of relative positions of the two overlapped pulses, i.e., pulse-to-pulse alignment. In our previous study, we have proposed a heterodyne interferometer based on synthetic wavelength method with femtosecond laser. The synthetic wavelength is derived from the virtual second harmonic and the real second harmonic, and the real second harmonic is produced by a piece of periodically poled LiNbO3 (PPLN) crystal. However, the second harmonic generation system makes the system complicated, and causes a great optical energy loss. In order to solve this problem, we generate the synthetic wavelength by two spatial band-pass filters in our present study, which can simplify the system greatly. Moreover, we can reduce the optical energy loss and tune the synthetic wavelength by controlling the angle of the filter. The synthetic wavelength used in the present system is 71.39 μm. The interferometricphase of the synthetic wavelength is used as a mark for the pulse-to-pulse alignment. In order to reduce the influences of air disturbance and temperature variation, we set up a thermal-insulated cover for the interferometer to stabilize the environment in the system. By using this cover, the optical path length difference of the system in 450 s can be reduced from 8.56 μm to 0.21 μm. To demonstrate the e?cacy of the method described above, the target mirror is moved by eight steps in steps of 5 mm. We compare the measurement results with those obtained by a commercial interferometer, and the residual error is less than 100 nm. Since the measurement range is larger than our previous study, the relative accuracy is better than the previous system. In conclusion, we demonstrate a synthetic-wavelength based absolute distance measurement by using heterodyne interferometry of a femtosecond laser. Two spatial band-pass filters are used to generate the synthetic wavelength, which can simplify the system. The comparison results show that the system has an accuracy better than 100 nm in a displacement of 40 mm. The accuracy of the experimental system can be further improved by making the common-path of the two interferometers longer, locking the fceo to the atomic clock and sampling the data synchronously.

High-Precision And Long-Range Distance Measurement Independent Of Temperature Based On Two Optoelectronic Oscillators

Real-Time and Long-Distance Measurement of Displacement Based on Optoelectronic Oscillator.

Absolute Distance Measurement Using an Optical Comb and an Optoelectronic Oscillator

High-precision Thermal-Insensitive Strain Sensor Based on Optoelectronic Oscillator

Absolute distance measurement without dead zone based on dual-channel dispersive interferometry using the femtosecond laser

A method for long absolute distance measurement based on high stability and synchronous multi-frequency

Real-time Absolute Distance Measurement by Multi-Wavelength Interferometry Synchronously Multi-Channel Phase-Locked to Frequency Comb and Analysis for the Potential Non-Ambiguity Range

Auto-Elimination Of Fiber Optical Path Length Drift In A Frequency-Scanning Interferometer For Absolute Distance Measurements

Efficient Phase Demodulation of Optical Carrier-Based Microwave Interferometry for High-Precision Dynamic Distance Measurement

Analysis Of An Innovative Method For Large-Scale High-Precision Absolute Distance Measurement Based On Multi-Heterodyne Interference Of Dual Optical Frequency Combs

High-precision long-distance measurement with an intensity-modulated frequency comb

Long distance measurement up to 1.2 km by electro-optic dual-comb interferometry

Optical fiber superheterodyne interferometer with a two wavelength HeNe laser for absolute distance inferometry

High-precision Strain-Insensitive Temperature Sensor Based on an Optoelectronic Oscillator

Synthetic-wavelength Based Absolute Distance Measurement Using Hetero Dyne Interferometry of a Femtosecond Laser

Real-Time and Meter-Scale Absolute Distance Measurement by Frequency-Comb-Referenced Multi-Wavelength Interferometry

High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

Strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear detection by numerical simulation

High-precision Absolute Distance Measurement using Dual-Laser Frequency Scanned Interferometry Under Realistic Conditions

Transient Long-Range Distance Measurement by a Vernier Spectral Interferometry

Study on High Speed Dual-Frequency Laser Interferometry in Two Longitudinal Modes