Abstract:The capacity of the electric grid in China is undergoing rapid expansion to keep pace with the fast economic growth. The annual gross production of the UHV products exceeded 100 billion RMB (approximately 12 billion Euro). Therefore the design and optimization technology for UHV SF6 gas circuit breakers are very demanding. Based on the two-dimensional magneto-hydrodynamic (MHD) model and a commercial CFD (computational fluid dynamics) software, FLUENT, a computer simulation tool for the design and optimization for UHV SF6 gas circuit breaker is established. Nozzle ablation effect is considered by introducing an independent mass conservation equation for the ablated material to the overall conservation equations of mass, momentum, and energy. The ohmic heating and the radiation of the electric arc are considered in the model by adding relevant source terms. Both the thermal interruption capability and the dielectric interruption capability can be numerically predicted. To predict the thermal interruption capability, the arc conductance 200ns before current zero is used as an indicator. The CFD model is applied for the high current arcing phase, and Mayr arc model is used near the current zero period. To predict the dielectric interruption, both the reduced electric field strength and the reduced critical electric filed strength everywhere inside the interrupter are computed and compared, to judge the occurrence of the electric breakdown. The validity of the present simulation model is verified by comparison of the simulation results with the experimental results such as voltage, currents of the arc and pressure rises Type here the email address of the main author as a footnote. inside the interrupter during the arc interruption. The numerical prediction by the simulation tool is verified by the direct interrupting test of 550kV GCB, too. The developed computer simulation tool was applied in the design of a 550kV GCB. Significant benefits have been achieved in terms of both the cost saving and shorten of the development cycle. The paper is organized as follows: the governing equations of the simulation model based on the 2-dimensional MHD model are presented in section 2. The numerical prediction of the thermal interruption capability of the SF6 GCB is described in section 3. The numerical prediction of the dielectric interruption capability of the SF6 GCB is described in section 4. In section 5 the experimental set-ups as well as the experimental results are presented and compared with the simulated ones. The numerical predictions agree well with the experiments. Finally conclusion is drawn in section 6.

Application Of Computational Fluid Dynamics To Predict The Temperature-Rise Of Gas Insulated Switchgears

Temperature Rise Simulation Of Medium Voltage Cubicle Type Gas Insulated Switch-Gear Based On Coupling Of Multi-Physical Fields

Application of Computational Fluid Dynamics to Predict the Temperature-Rise of Low Voltage Switchgear Compartment

Temperature Rise Characteristics Simulation of 40.5kv High Current Cubicle Type Gas Insulated Switchgear

Computation of Transient Electromagnetic Field Emission from GIS Enclosure During Disconnector Switching Operations

Three dimensional thermal field numerical calculation of 27.5 kV gas-insulated switchgear bus bar's cabinet

Studies of Modeling and Simulation Method of Temperature Rise in Medium-Voltage Switchgear and Its Optimum Design

Simulation Analysis on the Impact of Different Filling Gases on the Temperature Rise of C-GIS

Thermal Simulation Analysis of Temperature Distribution Characteristics in 220kv GIS

Study on Temperature Rise Characteristics of GIS Disconnector Under Different Operating Conditions

Computer simulation tool for the design and optimation for UHV SF6 circuit breakers

A Coupled Multifield Estimation for Temperature Rise in a Gas Insulated Bus Bar Using ANSYS

Contact Temperature Prediction in Three-Phase Gas-Insulated Bus Bars With the Finite-Element Method

Thermal analysis of three-phase enclosed GIS bus bar based on finite-element method

Multi-physics Coupling Simulation of Heat Transfer and Structural Optimization for a Three-phase Gas Insulated Switchgear Busbar

Electromagnetic-Thermal-Flow Field Coupling Simulation of 12-Kv Medium-Voltage Switchgear

Temperature Rise Numerical Calculation and Correlative Factors Analysis of Gas-Insulated Transmission Lines

Heat Dissipation Improvement of Medium-Voltage Switch-gear: Simulation Study and Experimental Validation

Finite Element Analysis of Contact Temperature rise in Gas Insulated Busbars based on Coupled Multi-physics

Temperature Distribution Analysis of Single-Phase GIS Bus

Numerical Simulation of Transient Heat Transfer Characteristics of Gas-insulated Transmission Lines Influenced by Environment Factors