Abstract:A catalyst of the Ni/Al2O3 was prepared by electroless plating-calcination (EPC) method using Al2O3 support for catalytic ozonation. To evaluate the catalytic activity of Ni/Al2O3, the O-3 + Ni/Al2O3 system was set up to degrade succinic acid (SA). First, the key preparation parameters (i.e., plating time, calcination temperature and calcination time) of Ni/Al2O3 and operational parameters (i.e., initial pH, ozone flow rate and the catalyst dosage) of O-3 + Ni/Al2O3 system were optimized, respectively. The maximum SA removal (100%) and total organic carbon (TOC) removal (84.7%) were obtained under the optimal conditions. Meanwhile, characteristics of the Ni/Al2O3 catalysts prepared by EPC method and traditional impregnation-calcination (IC) method were studied comparatively through scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Brunauer-Emmet-Teller (BET), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), respectively. The results show that nickel oxides (NiO) was uniformly deposited on the Al2O3 surface when Ni/Al2O3 was prepared by EPC method. On the contrary, when Ni/Al2O3 was prepared by IC method, nickel oxides were heterogeneously, rough and loose distributed on the surface of Al2O3 substrate. Furthermore, Ni/Al2O3 prepared by EPC possessed higher BET surface areas, higher pore volumes and smaller pore size distribution than Ni/Al2O3 prepared by IC. Finally, the catalytic mechanism of the O-3 + Ni/Al2O3 system was proposed according to the characterization of Ni/Al2O3 prepared by EPC, radical scavenging studies, hydroxyl radical (HO center dot) and H2O2 detection experiments. Collectively, these results suggest that the EPC method was a promising technology for catalyst preparation of Ni/Al2O3 with high catalytic performance and the Ni/Al2O3 should be proposed as a promising catalyst for the decomposition of ozone.

Catalytic Ozonation of Succinic Acid in Aqueous Solution Using the Catalyst of Ni/Al2O3 Prepared by Electroless Plating-Calcination Method

Strengthening the Catalytic Activity for Ozonation of Cu/Al2O3 by an Electroless Plating–Calcination Process

The Role of Surface Hydroxyl Concentration on Calcinated Alumina in Catalytic Ozonation

Γ-Al2o3 Modified with Praseodymium: an Application in the Heterogeneous Catalytic Ozonation of Succinic Acid in Aqueous Solution

Nickel Oxide/nickel Nanohybrids for Oxygen and Hydrogen Evolution in Alkaline Media

Catalytic Ozonation for Degradation of Sulfamethazine Using NiCo2O4 As Catalyst.

Interfacial Engineering and Vacancy Design of Quasi-2D NiCoAl-LDH/Kaolin Hybrid for Activating Peroxymonosulfate to Boost Degradation of Antibiotics

Nanostructured Co3O4 grown on nickel foam: An efficient and readily recyclable 3D catalyst for heterogeneous peroxymonosulfate activation

Catalytic Deep Oxidation of NO by Ozone over MnOx Loaded Spherical Alumina Catalyst

Preparation of Nickel-Based Bimetallic Catalyst and Its Activation of Persulfate for Degradation of Methyl Orange

Preparation of Cu-Mn/Fe3O4@SiO2@KCC Nanocatalyst and Its Application in Catalytic Ozonation for Degradation of Terephthalic Acid

In-situ Growth of Ni3S2@Mo2S3 Catalyst on Mo-Ni Foam for Degradation of P-Nitrophenol with a Good Synergetic Effect by Using Ozone

Enhanced Heterogeneous Catalytic Ozonation to Degrade P-Nitrophenol by Co-doped Ni3S2/NF Nanosheets

One-step synthesis of three-dimensional mesoporous Co3O4@Al2O3 nanocomposites with deep eutectic solvent: An efficient and stable peroxymonosulfate activator for organic pollutant degradations

Ozonation of tobias acid solution catalyzed by oxides of Ni, Fe and Cu

Bifunctional Ni@NiO catalyst supported on loofah sponge-derived carbon for electrocatalytic air oxidation of biorefractory pollutant in a coupling system

Cu2S/Ni3S2 Nanosheets Combined with Nickel Foam Substrate for Efficient Catalytic Ozonation of P-Nitrophenol in Wastewater

Efficient treatment of salty organic wastewater by α‐MnO2‐N/C synergistic catalytic ozonation: Effect and mechanism

Ni-Induced C-Al2O3-Framework (nicaf) Supported Core-Multishell Catalysts for Efficient Catalytic Ozonation: A Structure-to-Performance Study.

Mineralization of Salicylic Acid Via Catalytic Ozonation with Fe-Cu@SiO2 Core-Shell Catalyst: A Two-Stage First Order Reaction.

In-situ Growth of Mn-Ni3S2 on Nickel Foam for Catalytic Ozonation of P-Nitrophenol