Abstract:The B-pillar of automobile needs to meet the requirements of vehicle strength and rigidity, and also consider the fuel economy of vehicle. Therefore, the design and development of B-pillar is a difficult point in the field of car body design and manufacturing. Based on the side impact regulations, the safety model ling and simulation analysis of the B-pillar of the vehicle was carried out to obtain the change law of the intrusion amount and the intrusion speed of the five key points in the whole process. According to the analysis results of side impact of B-pillar, a scheme to reduce the material thickness of B-pillar body and increase patch plate for lightweight design was proposed, and a comparative analysis of the safety of side impact was made. In view of the problem that the intrusion of B-pillar of a real vehicle model did not conform to the regulations, the design scheme of adding patch plate was proposed to improve the safety of side impact. According to the actual collision results, the simulation model was modified, and the design scheme was simulated and optimized. The reliability of the design scheme was verified by the real vehicle collision analysis. The results show that: in the side collision of B-pillar, the intrusion of D2 position measurement point is the largest, the intrusion velocity of D3 position measurement point is the largest, and the intrusion amount and intrusion speed of D5 position measurement point are the smallest. Patch plates are added to the inner side of adjacent area of D2 position measurement point. The welding point is welded with B-pillar structure, and other areas of B-pillar keep the same structure, so as to realize lightweight and effective improvement of safety. Under the condition of maintaining the original material and thickness of B-pillar, two patches with thickness of 2 mm and material of B340LA are added in the middle of B-pillar to improve the structural strength. The defect area is set at the wrinkle position of the original B-pillar to guide the deformation mode of the B-pillar. The relative deviation between simulation calculation and test intrusion is less than 20 %, and the car crash simulation model with improved B-pillar structure is more accurate. For this type of car, the optimization and improvement effect of B-pillar structure is ideal, which improves the passenger safety protection ability in side impact.

Optimization of Crashworthiness for Tailored Hot Forming B-pillar Based on Side Impact

B-Pillar Optimization and its Effect on Side Impact Safety

Optimization Design of B-pillar based on Response Surface and Kriging Surrogate Model

Component Test Design and Optimization of B-Pillar Based on Vehicle Simulation

Crashworthiness Optimization of Variable Stiffness B-pillar with Thermoplastic Composites

Design optimization of hybrid material B-pillar under crush loading

Reliability optimal design of B-pillar for a hybrid electric vehicle in side impact

Crashworthiness and structural improvement for B-pillar based on welding technology

Multi-objective optimization of vehicle body B-pillar lower joints based on crashworthiness analysis

Crashworthiness Optimisation of A-pillar in Passenger Car in Rear-End Collision with Truck

Lightweight Design of Patch Plate on Car-body B-pillar based on Side Impact Safety

Multi-objective optimization design of B-pillar and rocker sub-systems of battery electric vehicle

Multi-objective crashworthiness optimization of vehicle body with negative Poisson's ratio structure based on factorial analysis

Optimization Design of Body Structure in Offset Crash

Structural design and global sensitivity analysis of the composite B-pillar with ply drop-off

Research on Crashworthiness and Lightweight of B-pillar Based on MPSO with TOPSIS Method

Integrated Design Technique for Materials and Structures of Vehicle Body under Crash Safety Considerations

Optimal Design of Vehicle Lateral Safety

Crashworthiness Design of Multi-Component Tailor-Welded Blank (TWB) Structures

Mechanical performance simulation and optimal design of carbon fiber composite B-pillar

Parallelized Optimization Design of Bumper Systems under Multiple Low-Speed Impact Loads