Abstract:The recent interest in developing low-cost, biocompatible, and lightweight bioelectronic devices has focused on organic electrochemical transistors (OECTs), which have the potential to fulfill these requirements. In this study, three types of poly(3-hexylthiophene) (P3HT)-based block copolymers (BCPs) incorporating different insulating blocks (poly(nbutyl acrylate) (PBA), polystyrene, and poly(ethylene oxide) (PEO)) were synthesized for application in OECTs. The morphological, crystallographic, and electrochemical properties of these BCPs are systematically investigated. Accordingly, P3HT-b-PBA demonstrates superior performance in the KCl-based aqueous electrolyte, with a higher product of mobility and capacitance (μC*) at 170 F s-1 cm-1 V-1 than that of the P3HT homopolymer at 58 F s-1 cm-1 V-1. P3HT-b-PBA exhibits better stability over 50 ON/OFF switching cycles than do other BCPs and P3HT homopolymers. With regard to the performance in the KPF6-based aqueous electrolyte, P3HT-b-PBA outperforms with a higher μC* of 9.2 F s-1 cm-1 V-1 than that of 8.6 F s-1 cm-1 V-1 observed from P3HT. Notably, both polymers exhibited almost no decay in device performance over 110 ON/OFF switching cycles. The strongly different performance of polymers in these two electrolytes is due to the side chain's hydrophobicity and interdigitated lamellar structures, thereby retarding the doping kinetics of the highly hydrated Cl- ions compared with the slightly hydrated PF6- ions. Concerning the improved performance of P3HT-b-PBA, this is attributed to its soft and hydrophobic backbone. Our morphological and crystallographic analyses reveal that P3HT-b-PBA experiences minimal structural disorder when swelled by the electrolyte, maintaining its original structure better than the P3HT homopolymer and the hydrophilic BCP of P3HT-b-PEO. The hydrophobic nature of P3HT-b-PBA contributes to the stability of its backbone structure, ensuring enhanced capacitance during the operation of the OECT operation. These findings provide reassurance about the stability and performance of P3HT-b-PBA in the field of OECT applications. In summary, this study represents the first exploration of P3HT-based BCPs for OECT applications and investigates their structure-performance relationships in mixed ionic-electronic conductors.

Application of CTA Mixed with PLGA As Biocompatible/biodegradable Dielectrics in EWOD Devices

Application of cellulose triacetate as biocompatible/biodegradable dielectrics in EWOD devices

Biocompatible/Biodegradable Electrowetting On Dielectric Microfluidic Chips With Fluorinated Cta/Plga

Evaluation of Cyanoethyl Pullulan material as the dielectric layer for EWOD devices

Study of cyanoethyl pullulan as insulator for electrowetting

Using Ferroelectric Thin Film As the Dielectric for Electrowetting-on-Dielectric

Replaceable Dielectric Film for Low-Voltage and High-Performance Electrowetting-Based Digital Microfluidics

Facile Low-Voltage Electrowetting on Dielectrics Using CYTOP™ As Both the Hydrophobic and Insulating Layer

Development of Cyclic Tetrasiloxane Polymer as a High-Performance Dielectric and Hydrophobic Layer for Electrowetting Displays

Stereocomplex Crystals Induced Outstanding Energy Storage Performance with PLLA/PDLA Blend Film

Improvement of Thermal Stability of Charges in Polylactic Acid Electret Films for Biodegradable Electromechanical Sensors

Design and fabrication of bilayer polylactic acid @ secondary alkyl sulfonate/cellulose fabrics with asymmetric wettability for the electronic device packaging

AgNW/stereocomplex-type polylactide biodegradable conducting film and its application in flexible electronics

Interfacial Stabilization of Organic Electrochemical Transistors Conferred Using Polythiophene-Based Conjugated Block Copolymers with a Hydrophobic Coil Design

High Performance Organic Electronic Devices Based on a Green Hybrid Dielectric

Multilayer polyetherimide films incorporating alumina nanolayers for dielectric capacitors

Tough and Water-Resistant Bioelastomers with Active-Controllable Degradation Rates

Light weight, low dielectric constant, super-robust polylactide film based on stress-induced cavitation aided by crystallization

Performance Improvement of Poly(lactic Acid) Films for Bioelectronics with Eco-Friendly Supercritical Fluids Combined with Activated-Carbon Technique

Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers

Tuning wettability and mechanical property of polylactide composite films with in-situ nanofibrils of poly(butylene adipate-co-terephthalate)