Abstract:During the past two decades, wearable devices have been broadly used for a variety of fields such as biomedical system, communication and microelectronics. The power system such as lithium-ion batteries is essential to the operation of wearable devices, which should adapt to irregular substrates and sustain complex deformations. A promising strategy is to fabricate high-performance energy storage devices in a fiber shape, e.g., fiber lithium-ion batteries (LIBs). These fiber LIBs with diameters ranging from tens to hundreds of micrometers can be readily integrated with human body and work stably under constant body motions. They can also be woven into breathable fabrics to satisfy the needs of wearable electronics. The key challenges facing fiber LIBs include effective loading of active materials on fiber electrodes, efficient charge transfer along fiber electrodes and interface stability of fiber electrodes under operation and deformation. Fiber electrodes are thus designed with hierarchical and aligned channels to effectively load active materials, so an effective electric field can be established between the fiber cathode and anode. Aligned carbon nanotubes (CNTs) can be made with conductive additives and active materials into fiber electrodes by a continuous spinning process. Conventional metal current collectors, binders and conductive agents are not required, and active materials may reach 90% of the electrode by weight. The resulting hierarchically helical CNT fiber electrode shows high flexibility, high strength, and high electrical conductivity. The flexural rigidity is as low as 10-7 nN/m(2), which is several orders of magnitude lower than those of ordinary synthetic fibers. The specific strength reaches 107 Nm/kg, which is higher than those of ordinary synthetic fibers. The conductivity reaches 10(4) S/cm, which can meet the needs of batteries. The aligned CNT composite fiber permits efficient electron transport, where the electrons hop among neighboring CNTs. Besides, due to the capillary force, the electrolyte can penetrate throughout the entire fiber via micrometer-sized and nanometer-sized channels, benefiting ion transport. The twisted CNT bundles firmly bind active materials and prevent their significant volume variations during charge and discharge processes. Therefore, the efficient conductive pathways can be maintained to deliver both high rate and cyclic stability. Fiber LIBs could be fabricated by assembling two fiber electrodes in parallel, twisting or coaxial structure. Gel electrolyte avoids the potential safety risks stemmed from liquid electrolytes. The continuously fiber LIBs show both high flexibility and energy storage capacity. After bending for 100000 cycles, the capacities have been well maintained, and the energy densities exceed 100 Wh/kg. Based on the similar strategy, a series of fiber energy storage devices such as supercapacitors, lithium-sulfur batteries, lithium-air batteries, zinc-ion batteries, zincair batteries and aluminum-air batteries, have been also produced. To summarize, fiber energy storage devices can be woven into flexible fabrics or integrated with energy harvesting devices to satisfy the next-generation electronics. Such a new strategy establishes an efficient avenue to particularly accelerate the development of wearable electronics in the future.

A Flexible Lithium-Ion Battery with Quasi-Solid Gel Electrolyte for Storing Pulsed Energy Generated by Triboelectric Nanogenerator

A High Strength Triboelectric Nanogenerator Based on Rigid-Flexible Coupling Design for Energy Storage System

Flexible Quasi-Solid-State Sodium Battery for Storing Pulse Electricity Harvested from Triboelectric Nanogenerators

High Performance Lithium-Sulfur Batteries for Storing Pulsed Energy Generated by Triboelectric Nanogenerators

Efficient Storing Energy Harvested by Triboelectric Nanogenerators Using a Safe and Durable All‐Solid‐State Sodium‐Ion Battery

A Flexible, Recyclable, and High‐Performance Pullulan‐Based Triboelectric Nanogenerator (TENG)

Integrated and Shape-Adaptable Multifunctional Flexible Triboelectric Nanogenerators Using Coaxial Direct Ink Writing 3D Printing

Flexible, multifunctional, ultra-light and high-efficiency liquid metal/polydimethylsiloxane sponge-based triboelectric nanogenerator for wearable power source and self-powered sensor

Flexible and multifunctional triboelectric nanogenerator based on liquid metal/polyvinyl alcohol hydrogel for energy harvesting and self-powered wearable human–machine interaction

Flexible self-charging lithium battery for storing low-frequency mechanical energy

Ultrahigh Performance Triboelectric Nanogenerator Enabled by Charge Transmission in Interfacial Lubrication and Potential Decentralization Design

Towards Wearable Electronic Devices: A Quasi-Solid-state Aqueous Lithium-Ion Battery with Outstanding Stability, Flexibility, Safety and Breathability

3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage

Transparent and Stretchable High-Output Triboelectric Nanogenerator for High-Efficiency Self-Charging Energy Storage Systems

Hydrophobic Ionic Liquid Gel-Based Triboelectric Nanogenerator: Next Generation of Ultrastable, Flexible, and Transparent Power Sources for Sustainable Electronics

Effects of Pulse Charging on the Performances of Lithium-Ion Batteries

An extremely safe and wearable solid-state zinc ion battery based on a hierarchical structured polymer electrolyte

Liquid-Metal-Based Super-Stretchable and Structure-Designable Triboelectric Nanogenerator for Wearable Electronics

Research Progress of Fiber-Shaped Electrochemical Energy Storage Devices

A Design of Flexible Triboelectric Generator Integrated with High‐Efficiency Energy Storage Unit

Small-Sized, Lightweight, and Flexible Triboelectric Nanogenerator Enhanced by PTFE/PDMS Nanocomposite Electret.