Abstract:The mechanical behavior of the metallic components fabricated by additive manufacturing (AM) technologies can be influenced by adjustments in their microstructure or by using specially engineered geometries. Manipulating the topological features of the component, such as incorporating unit cells, enables the production of lighter metamaterials, such as lattice structures. This study investigates the mechanical behavior of lattice structures created from AlSi10Mg, which were produced using the laser beam powder bed fusion (LB-PBF) process. Specifically, their behavior under pure compressive loading has been numerically and experimentally investigated using ten different configurations. Experimental methods and finite element analysis (FEA) were used to investigate the behavior of body-centered cubic (BCC) lattice structures, specifically examining the effects of tapering the struts by varying their diameters at the endpoints (dend) and midpoints (dmid), as well as altering the height of the joint nodes (h). The unit cells were designed with varying parameters in such a way that dend is changed at three levels, while dmid and h are changed at two levels. Significant differences in Young's modulus, yield strength, and ultimate compressive strength between the various specimen configurations were observed both experimentally and numerically. The FEA underestimated the Young's modulus corresponding to the configurations with thinner struts in comparison to the higher values found experimentally. Conversely, the FEA overestimated the Young's modulus of those configurations with larger strut diameters with respect to the experimentally determined values. Additionally, the proposed FE method consistently underestimated the yield strength relative to the experimental values, with notable discrepancies in specific configurations.

A FEM Study on Mechanical Behavior of Cellular Lattice Materials Based on Combined Elements

Fracture Characteristic Analysis of Cellular Lattice Structures under Tensile Load

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Lattice Structures and Mechanical Properties of FeCrNi Medium-Entropy Alloy Prepared by Selective Laser Melting

Fracture and Failure Behavior of Additive Manufactured Ti6Al4V Lattice Structures under Compressive Load

Mechanical Properties of Selective Laser Melting Processed Multi‐Hierarchical Lattice Structure Based on Body‐Centered Cubic Unit Cell

Thermal Behavior and Mechanical Properties of Different Lattice Structures Fabricated Using Selective Laser Melting

Designable Mechanical Properties of Modified Body-Centered Cubic Lattice Materials

Research on the Application Potential of Lattice Materials Based on the Cell Configuration

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

A Study on the Compressive Behavior of Additively Manufactured AlSi10Mg Lattice Structures

Mechanical Behavior of Open-Cell Rhombic Dodecahedron Ti–6Al–4V Lattice Structure

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Theoretical Analysis of the Mechanical Response of Lattice Structures Manufactured Using Selective Laser Melting

Mechanical Properties of AlSi10Mg Lattice Structures Fabricated by Selective Laser Melting

Compressive properties of AlSi10Mg lattice structures with novel BCCZZ and FCCZZ configurations fabricated by selective laser melting

Similarities of the Mechanical Responses of Body-Centered Cubic Lattice Structures with Different Constituent Materials under Compression

An Investigation of the Mechanical Properties of Metallic Lattice Structures Fabricated Using Selective Laser Melting

Mechanical Performances of Aluminum Cellular Metal with Kelvin and Cubic Structure

Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures