Abstract:This article proposes a support diminution design method for layered manufacturing of manifold surface based on variable orientation tracking (VOT). We aim at reducing the external support or upholders to a minimum with maximum possibility theoretically to save material and diminish material stripping effect ( MSE), thereby improving the bilateral surface precision either exterior or interior. The cosmic gravity effect criterion is first used to extract surface need support from manifold surface with various materials by considering the balance force involving material characteristics and inclination angle. In the light of this criterion theory, varying the substrate normal orientation (SNO), namely workbench, for each layer in printing coordinate system, may break the balance between gravity and its equilibrium force. Therefore, the optimal SNO can be rigorously calculated using mathematical harmonic analysis among the continuous domain. To serve for the multidegree of freedom (DOF) on account of SNO, a reconfigurable VOT robot with six-axis DOF is developed for 3D printing (3DP). The matched servo controller is successfully implemented to accurate tracking of both orientation and Cartesian coordinates, using forward kinematic chains as well as reverse kinematic tracking. What is more, the endeffector (extruder) is holding perpendicular to the substrate workbench. The physical experiment that takes human external ear auricle, for example, using a layer-based process is implemented via VOT. The MSE due to supporting material can be clearly observed and diminished using an optical microscope. The stripped material from external support via diminution design can be evaluated quantitatively by electronic weighting balance. All of which indicate the findings that external support in 3DP can be virtually reckoned and diminished using VOT rather than the so-called build orientation traversal method. The VOT method upon which we touched can be widely applied to various layered manufacturing of accurate structure, for instance, cantilever, sandwich, and scaffolds in the occasion needing precise curtailment of outer support multimaterial.

Inclined Layer Printing for Fused Deposition Modeling Without Assisted Supporting Structure

Modeling and Process Planning for Curved Layer Fused Deposition

Support Diminution Design for Layered Manufacturing of Manifold Surface Based on Variable Orientation Tracking

Design and Validation of 3D Self-Supporting Structures and Printing Paths for Multi-Axis Additive Manufacturing

Layout and Geometry Optimization Design for 3D Printing of Self-Supporting Structures

Fused Deposition Modeling Five-Axis Additive Manufacturing: Machine Design, Fundamental Printing Methods and Critical Process Characteristics

Topology Optimisation of Self-Supporting Structures Based on the Multi-Directional Additive Manufacturing Technique

A Support-free Infill Structure Based on Layer Construction for 3D Printing

Generation Algorithm of a Novel Platform Attached Support Structure for FDM-Fused Deposition Modeling

Anti-aliasing for fused filament deposition

4D Printed Self-Helix Structure Based on Internal Stress Reversibility

Complicated Deformation Simulating on Temperature-Driven 4D Printed Bilayer Structures Based on Reduced Bilayer Plate Model

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

A Common Simulating Model on Complicated Self-Deformation of 4D Printed Bilayer Structures

Convexity and Surface Quality Enhanced Curved Slicing for Support-Free Multi-Axis Fabrication

Support generation for additive manufacturing based on sliced data

From All‐Printed 2D Patterns to Free‐Standing 3D Structures: Controlled Buckling and Selective Bonding

4D Printing Via Multispeed Fused Deposition Modeling

Self-Supporting Lamellae: Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures

Multi-Axis Support-Free Printing of Freeform Parts with Lattice Infill Structures

Short Review of Nonplanar Fused Deposition Modeling Printing