Abstract:An optimized handling stability control strategy is put forward aiming at enhancing a four in-wheel independent-drive motors electric vehicle (4WIDEV) performance capable of handling and stability. The optimized control strategy is designed by a hierarchical control structure, which mainly includes vehicle motion controller and vehicle torque distribution controller. Lateral stability controller, in-vehicle motion controller, which yields the generalized force and generalized yaw moment required of the vehicle, is designed into two modes: an instability control mode and a continuous control mode, which mode is activated determining by stability judgment controller based on phase portraits of sideslip angle and yaw rate. When the vehicle state exceeds the stability envelope region, instability control mode based on envelope control is utilized by sliding mode control method, simultaneously controlling the two-vehicle states variables, whereas continuous control mode is performed with adaptive adjustment of the weight parameter according to pre-defined stability degree. The lateral stability controller with adaptive switching two modes exhibits excellent handling stability performance under normal driving conditions, especially under critical conditions, such as on low tire-road adhesion coefficient. The vehicle torque distribution controller assigns driving or regenerative braking torque to four wheels reasonably and efficiently to satisfy the generalized force and the generalize yaw moment acquired by the vehicle motion controller, which synchronously considers the motor output capability and tire friction ellipse constraints while maintains each wheel slip ratio within the stable range. The results in co-simulation experiments based on Carsim and MATLAB/Simulink verify the proposed control strategy, compared with other control strategies, and demonstrate the effective improvement 4WIDEV’s performance in terms of handling stability especially under critical conditions.

Decoupled Roll Stability Control of In-wheel Motor Drive Electric Vehicle

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Dynamic Stability Control Strategy Development for an In-Wheel Motorized Electric Vehicle

Yaw stability control for electric vehicle with in-wheel motors based on distributed model predictive control

Direct Yaw-Moment Control of Electric Vehicle With in-Wheel Motor Drive System

Research on Stability Control Algorithm of Distributed Drive Bus under High-Speed Conditions

Stability Control for Different Drive Modes of Four In-Wheel Motor Drive Electric Vehicles

Hierarchical Input-Output Decoupling Control for Vehicle Rollover Mitigation

Stability Control for a Four-Motor-Wheel Drive Electric Vehicle Based on Sliding Mode Control

Stability control of in-wheel motor electric vehicles under extreme conditions:

Yaw Stability Control of a Four-Independent-wheel Drive Electric Vehicle

A Piecewise Affine Robust Yaw Stability Control Method for In-wheel Motor Electric Vehicle

Rollover prevention control for a four in-wheel motors drive electric vehicle on an uneven road

Integrated control of braking-yaw-roll stability under steering-braking conditions

Integrated Yaw Stability Control of Electric Vehicle Equipped with Front/Rear Steer-by-Wire Systems and Four In-Wheel Motors

Coordination Control of Maneuverability and Stability for Four-Wheel-Independent-Drive EV Considering Tire Sideslip

Advanced Vertical and Lateral Coupling Dynamics Control for a Four In-wheel Motor Drive Electric Vehicle

Robust Control of Regenerative and Hydraulic Brakes for Enhancing Directional Stability of an Electric Vehicle During Straight-Line Braking

Robust Yaw Stability Control for In-Wheel Motor Electric Vehicles

Enhancing high-speed steering stability of wheel-legged vehicles by active roll control

Optimized Handling Stability Control Strategy for a Four In-Wheel Motor Independent-Drive Electric Vehicle.