Abstract:Quantitative analysis is an important aspect of surface-enhanced Raman spectroscopy (SERS). However, due to changes in the enhancing performance of SERS substrates, it is difficult to obtain reliable analysis results. In this work, a reliable quantitative method is introduced to overcome this problem by an external standard method. To achieve the external standard method, a self-assembled film of activated carbon nanoparticles is first prepared at the air/liquid (KCl aqueous solution) interface. Next, the activated carbon film transferred onto the surface of a Teflon slice (extraction film) is dipped into a high concentration of analyte to achieve reliable saturated adsorption, and the extraction film under saturated adsorption is called the reference (external standard). The uniformity is very good in one extraction film and thus the extraction film is cut into halves (used to prepare the determinand and reference) to eliminate deviation of different batches. The saturated adsorption time of the extraction film is different for different concentrations of analyte and the concentration can be therefore quantified by saturated adsorption time. Because the enhancing performance of the SERS substrate is almost unchanged in a short time and all of the SERS measurements are conducted at a similar measurement condition (saturated adsorption), the SERS intensity of the determinand and reference is almost the same under saturated adsorption. The SERS intensity of the determinand normalized by the reference is therefore very stable and uniform (approximately equal to "1" under saturated adsorption). The preparation conditions of the determinand and the reference are the same except for the concentration of the analyte, thus the interference can be eliminated by an external standard method. Any perturbations caused by the performance change of colloid substrates can be therefore effectively overcome. Moreover, the saturated adsorption time of the extraction film for different concentrations of analyte has a large time margin. This method is very simple and the cost is very low. Based on this method, a concept of time-discretized quantitative SERS (TDQ-SERS) is introduced. Thus, a reliable, simple, and economic quantitative SERS technique can be achieved.

Self-assembled activated carbon nanoparticles for reliable time-discretized quantitative surface-enhanced Raman spectroscopy

Ratiometric SERS Quantification of SO2 Vapor Based on Au@Ag-Au with Raman Reporter As Internal Standard.

Quantitative Surface-Enhanced Raman Spectroscopy for Field Detections Based on Structurally Homogeneous Silver-Coated Silicon Nanocone Arrays

In Situ Quantitative Graphene-Based Surface-Enhanced Raman Spectroscopy

A New Approach for Quantitative Surface‐Enhanced Raman Spectroscopy through the Kinetics of Chemisorption

Highly Sensitive, Uniform, and Reproducible Surface-Enhanced Raman Spectroscopy Substrate with Nanometer-Scale Quasi-periodic Nanostructures.

Quantitative SERS sensing mediated by internal standard Raman signal from silica nanoparticles in flexible polymer matrix

Robust Quantitative SERS Analysis with Relative Raman Scattering Intensities.

On-demand Quantitative SERS Bioassays Facilitated by Surface-Tethered Ratiometric Probes.

A Self-Calibrated 2D Nanoarchitecture for Label-Free SERS Quantitation and Distribution Imaging of Target

Surface enhanced Raman scattering substrates prepared by thermal evaporation on liquid surfaces.

Real-time Preparation of Surface Enhanced Raman Scattering Substrate for On-Line Analysis of Aromatic Molecules in Capillary

Ultrasensitive and reproducible surface-enhanced Raman scattering detection via an optimized adsorption process and filter-based substrate

Quantification of Trace Chemicals in Unknown Complex Systems by SERS.

Quantitative and Sensitive SERS Platform with Analyte Enrichment and Filtration Function.

Electrochemically Assisted Wide Area Raman with Standard Curved Surface Quantification Method.

Facial Fabrication of Large-Scale SERS-Active Substrate Based on Self-Assembled Monolayer of Silver Nanoparticles on CTAB-Modified Silicon for Analytical Applications

Silver nanocubes monolayers as a SERS substrate for quantitative analysis

Precise real-time quantification for photocatalytic reaction: integration of the sensitive in-situ SERS sensor and high-efficiency photocatalyst

Quantitative Label-Free and Real-Time Surface-Enhanced Raman Scattering Monitoring of Reaction Kinetics Using Self-Assembled Bifunctional Nanoparticle Arrays.

Exploring Quantification in a Mixture Using Graphene-Based Surface-Enhanced Raman Spectroscopy