Abstract:Understanding the energy release rules during shear damage of rock structural planes is of great importance to reveal the mechanism of slip-type rockbursts. To investigate the energy evolution characteristics during shear deformation of structural surfaces, numerical simulations of direct shear experiments on rough rock structural surfaces are carried out using particle flow code. In the simulation, acoustic emission (AE) monitoring is achieved by tracking the kinetic energy change of the two particles located in both sides of the fractured crack. Based on the spatiotemporal distribution of AE energy, the failure patterns of the structural plane and the intensity of energy release are firstly correlated. Then, the effects of normal stress and joint roughness coefficient (JRC) of structural planes on AE b-value are explored. Finally, the feasibility of taking AE b-value as a precursor of shear failure of rock structural planes is demonstrated. The results show that the gnawing break at protrusions has the most intense energy release, while the energy release related to frictional abrasion and rock block fracturing is lower. For the AE b-value during the whole deformation process, it decreases continuously with increasing normal stress. Under a given normal stress, when JRC is less than 12, the change of b-value is not significant; once JRC exceeds 12, the b-value decreases continuously with increasing JRC. For cases with more active AE activity in the pre-peak deformation stage, the b-value appears to decrease significantly after the shear deformation proceeds to the post-peak damage stage from the pre-peak stage. It indicates that the AE b-value can be employed as a precursor of shear failure of rock structural planes.

Bi-Gaussian Stratified Effect of Rough Surfaces on Acoustic Emission under a Dry Sliding Friction

A Bi-Gaussian Acoustic Emission Model for Sliding Friction

Mechanism of bi-Gaussian surface topographies on generating acoustic emissions under a sliding friction

Slip Boundary Conditions for Rough Surfaces

Stratified Revised Asperity Contact Model for Worn Surfaces

Quantitative Relationship Between Sliding-Generated Acoustic Emission and Friction Conditions at Bolted Joint Interfaces

Sliding wear studies using acoustic emission

A Study of Sliding Friction Using an Acoustic Emission and Wavelet-Based Energy Approach

Acoustic Emission and Its Relationship with Friction and Wear for Sliding Contact

The Bi-Gaussian Theory to Understand Sliding Wear and Friction

Bi-Gaussian Stratified Wetting Model on Rough Surfaces.

Predicting the coefficient of friction in a sliding contact by applying machine learning to acoustic emission data

A Time-Frequency Based Approach for Acoustic Emission Assessment of Sliding Wear

Research on Mixed Lubrication Problems of the Non-Gaussian Rough Textured Surface With the Influence of Stochastic Roughness in Consideration

Stratified Effect of Continuous Bi-Gaussian Rough Surface on Lubrication and Asperity Contact

Bi-fractal Feature of Bi-Gaussian Stratified Surfaces

Modeling of Acoustic Emission Based on the Experimental and Theoretical Methods and Its Application in Face Grinding

Study on acoustic emission characteristics during shear deformation of rock structural planes based on particle flow code

Dual-Impulse Response Model for the Acoustic Emission Produced by a Spall and the Size Evaluation in Rolling Element Bearings.

Coupled nonlinear effects of random surface roughness and rarefaction on slip flow in ultra-thin film gas bearing lubrication

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials