Abstract:As a new type of environmentally friendly adsorbent, biochar has been increasingly applied in water pollution treatment. Herein, a catalyzed and activated biochar adsorbent (CABC) which was derived from hazelnut shell and modified by FeCl 3 and ZnCl 2 was synthesized successfully. The CABC was applied to remove two typical Pharmaceutical and Personal Products (PPCPs), sulfamethoxazole (SMX) and diclofenac (DCF). The CABC obtained high specific surface area of 1413.02 m 2 /g. The removal rates for SMX and DCF by CABC could reach 97.04 % and 98.65 %, respectively. The adsorption process was consistent with the pseudo-second-order kinetic model and the Langmuir isothermal model, which illustrated that the adsorption process conformed to chemical adsorption and monolayer adsorption. The thermodynamics indicated that the adsorption process was endothermic and could occur spontaneously. After 5 cycles, the CABC still remained a high removal efficiency of 77.7 % and 80.5 % for SMX and DCF, which showed a good reusability. The removal rates of CABC for multiple PPCPs had achieved over 77.7–98.0 %. In different actual wastewater, the removal rates of CABC for SMX and DCF ranged from 56.7 % to 97 %, demonstrating its excellent universality and practical value for utilization. Furthermore, three machine learning models based on Decision Tree, Random Forest and Gradient Boosting Decision Tree algorithm were applied to predict the removal efficiency and determine the relative importance of different influencing factors. The gradient boosting regressor model obtained the best predict performance with R 2 at 0.9806 and 0.9840 for training set and testing set. And the importance analysis had shown that pH was the most important influencing factor with the importance value over 0.35. The adsorption mechanism between CABC and pollutants included pore adsorption, electrostatic interactions, intramolecular hydrogen bonding, the reaction with oxygen-containing functional groups and metal complexation. The prepared biochar adsorbent CABC possessed the potential for PPCPs removing. In addition, the machine learning method can play more and more undeniable role in subsequent water treatment. In future research, machine learning can be used to predict the adsorption performance of materials, enabling targeted design of materials. This will greatly save experimental time and cost losses, and can improve research efficiency.

Simultaneous Mitigation of P- Cresol and Ammonium Using Activated Carbon from Avocado Seed

Avocado Seed-Derived Activated Carbon for Mitigation of Aqueous Ammonium

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Sustainable removal of caffeine and acetaminophen from water using biomass waste-derived activated carbon: Synthesis, characterization, and modelling

Adsorptive performances and valorization of green synthesized biochar-based activated carbon from banana peel and corn cob composites for the abatement of Cr(VI) from synthetic solutions: Parameters, isotherms, and remediation studies

Physicochemical assessment of ammonium adsorption using a palm shell-based adsorbent activated with acetic acid: experimental and theoretical studies

Enhanced removal of ammonium nitrogen from aqueous solutions using a novel biochar derived from millet shells through both static adsorption and dynamic column experiments

Sugarcane bagasse-derived biochar modified by alkali for enriching surface functional groups to effectively treat ammonium-contaminated water

Effectively removal of PPCPs by catalytic activated biochar derived from hazelnut shell: Modeled and predicted by machine learning

The inherent nature of N/P heteroatoms in Sargassum fusiforme seaweed biochar enhanced the nonradical activation of peroxymonosulfate for acetaminophen degradation in aquatic environments

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

Impacts of controlled microwave field irradiation on o-cresol and p-cresol adsorption capability of activated carbon

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Optimization of Paracetamol and Chloramphenicol Removal by Novel Activated Carbon Derived from Sawdust Using Response Surface Methodology

Approaches to Mitigate the Impact of Dissolved Organic Matter on the Adsorption of Synthetic Organic Contaminants by Porous Carbonaceous Sorbents

Elucidating the performance of (N-(3-aminopropyl)-1, 3-propanediamine) activated (1- dimethylamino-2-propanol) as a novel amine formulation for post combustion carbon dioxide capture

Adsorption of N-nitrosodimethylamine Precursors by Powdered and Granular Activated Carbon.

Removal of Pesticide Residues in Aqueous Solution by Adsorption Using Pineapple Peel Activated Carbon

Microbially-mediated synthesis of activated carbon derived from cottonseed husks for enhanced sulfanilamide removal

Facile fabrication of chitosan/bone/bamboo biochar beads for simultaneous removal of co-existing Cr(VI) and bisphenol a from water

A highly efficient modified nano-activated carbon adsorbent for separation of ammonia from water: Experimental and kinetics elucidations