Abstract:The main objective of this work was to experimentally and numerically investigate the Liu Shu River oil shale drying by the means of flue gas in a fluidized bed dryer. Several experiments were performed under different temperatures conditions. The moisture content of oil shale was measured during the experiments. The two-stage drying model was incorporated in computational fluid dynamics (CFD) package FLUENT via user-defined functions (UDF) and utilized for simulation of heat and mass transfer of oil shale drying in the fluidized bed dryer. The simulation results for solid moisture content agreed well with experimental data. The effects of the temperature and velocity of flue gas, initial bed height, and the particle size on the drying characteristics were predicted and analyzed. It is shown that the gas temperature and velocity are the important parameters in the whole drying process. The particle size has more obvious influence in the falling drying period than the constant drying period. The temperatures of gas and solid phases were monitored. It is shown that the so-called near gas distributor zone is the most effective heat transfer zone, which agrees well with the calculated value. The system quickly reached thermal equilibrium, characterizing a nearly isothermal bed. The developed model provides a very good demonstration to describe the oil shale drying in the fluidized bed dryer, and may provide important information for design, optimization of operation conditions.

Research on Heat and Mass Transfer Characteristics of Flue Gas Flow Drying Biomass Particles

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

The simulation and experimental analysis for pneumatic drying of biomass stalk.

Numerical Simulation and Experimental Research of Pneumatic Drying on Biomass Fuel

Two-Dimensional Mathematical Modeling of Heat and Mass Transfer in Fluidized-Bed Drying of Porous Material

NUMERICAL SIMULATION FOR DRYING PROCESS OF GAS FLOW CONTAINING HUMID COAL ASH PARTICLES

Experimental and Numerical Analysis of Oil Shale Drying in Fluidized Bed

Simulation Investigation of Drying Characteristics of Wet Filamentous Biomass Particles in a Rotary Kiln

The Experimental Investigation and Numerical Simulation for Pneumatic Drying of Stalk

INVESTIGATION ON THE INCIPIENT FLUIDIZATION AND HEAT TRANSFER IN A CENTRIFUGAL FLUIDIZED BED DRYER

STUDY ON HOT-AIR CHARACTERISTICS OF BIOMASS IN FLUIDIZED BED

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

Numerical simulation of single lignite particle drying process in high temperature flue gas

Numerical Simulation and Test of Particulate Materials Heat and Mass Transfer

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Study on heat and mass transfer of flexible filamentous particles in a rotary dryer

Heat transfer of tubes in gas-solid cross flow

Thermal and Moisture Analysis for Tobacco Leaf Flue-Curing with Heat Pump Technology

Research on the Heat Transfer and Mass Transfer of Tobacco During Drying Process in Tobacco Redryer

Effect of heat and mass transfer coefficients on force convective drying of porous media

Numerical Simulation of Heat and Mass Transfer in Sludge Low-Temperature Drying Process