Abstract:Ocean temperature monitoring is of great significance to marine fishing, aquaculture, and marine operations. Traditional electric sensors lack the potential to multiplex several sensors, and may suffer from electromagnetic interference. Meanwhile, fiber Bragg grating-based sensors have the advantages of high sensitivity, possibility for large-scale multiplexing, and immunity to electromagnetic interference. In this paper, we propose a Fabry–Pérot (FP) interferometer based on the draw tower grating array and combine it with the phase measurement method for demonstration and testing. In the sensor system, two adjacent fiber Bragg gratings (FBGs) are used as mirrors and an optical fiber connects them, forming a sensor unit. The signal was detected through the compensation of the optical path difference via two-arm path differences in an unbalanced interferometer. The sensor is calibrated in the range of 36.00–36.50 °C, and back to 36.00 °C, in steps of 0.10 °C. A thermocouple (DW1222) is used as a reference. Experimental testing demonstrates that under the thermal loop, the temperature and phase can be approximated as a linear relationship, the Pearson square correlation coefficient is 0.9996, and the temperature sensitivity is −9846 rad/°C. To prove that our experimental device can achieve a higher temperature resolution, we measured the background noise of the system. The experimental results indicate that the order of magnitude of our system temperature resolution can reach 10−5 °C. Thus, we believe that the sensor system is promising for the application of ocean temperature detection, and owing to the ultraweak reflection characteristics of the FBG, this method provides the possibility for large-scale multiplexing of the system.

Quasidistributed temperature sensor based on dense wavelength-division multiplexing optical fiber delay

Quasi-distributed temperature sensor based on cascaded quantum-dot fiber

Simultaneous wavelength and frequency encoded microstructure based quasi-distributed temperature sensor

Distributed Optical Fiber Sensing Measurement Based on Time Offset

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

Quasidistributed fiber Bragg grating sensor network based on self-heterodyne detection technique

Fully Distributed Multi-Channel Fiber-Optic Sensor for Simultaneous Relative Humidity and Temperature Measurement With Finer Gauge Length Based on Spatial-Domain Time-Delayed Multiplexing

A Photon-Counting Optical Time-Domain Reflectometry Based Optical Fiber Temperature Sensor System

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

A fully distributed fiber optic sensor for simultaneous relative humidity and temperature measurement with polyimide-coated polarization maintaining fiber

Optical fiber quantum temperature sensing based on single photon interferometer

A Distributed Brillouin Temperature Sensor Using a Single-Photon Detector

A distributed temperature sensor based on liquid-core optical fibers

Distributed Temperature/Vibration Fiber Optic Sensor With High Precision and Wide Bandwidth

Quantum Dots-Based Multiplexed Fiber-Optic Temperature Sensors

Study on the Technique of Brillouin Scattering Distributed Optical Fiber SensingBased on Optical Interferometric Heterodyne Detection

High-sensitivity Temperature Sensor Based on Single-Mode Fiber for Temperature-Measurement Application in the Ocean

Analysis of a distributed fiber-optic temperature sensor using single-photon detectors

Highly Sensitive and Fast Surface Temperature Sensor Based on Standard Single-Mode Fiber Using Double Heterodyne Interference Technology

High-Resolution Optical Fiber Temperature Sensor Based on Draw Tower Grating Array

A Temperature-Insensitive Multipoint Displacement Sensing System Based on Fiber Macro-bending Loss