Abstract:Hydrostatic spindles are widely used in precision optical grinder and lathe. Their high precision comes from the error averaging effect of oil film. The purpose of this paper is to give the quantitative analysis of the error averaging effect for a newly developed axial locking-prevention hydrostatic spindle. An approximate error motion model of the hydrostatic spindle is established to analyze the internal relationship between the geometric errors of the shaft and the error motions of the spindle including radial, tilt and axial error motions. The theoretical analysis shows that, the roundness errors of the two journals have a major impact on error motions while the coaxiality errors of two journals, the perpendicularity errors of front thrust plate and the coaxiality errors of the land of back thrust bearing, have no significant influences on error motions. The elliptical component of roundness errors of the two journals has significant influence on the axial error motion but no influence on the pure radial and tilt error motions, resulting into the fourth harmonic component of axial error motion. The trilobal component of roundness errors of the two journals has significant influence on the pure radial and tilt error motions but no influence on the axial error motion, resulting in the third harmonic component of pure radial and tilt error motions. The changes of recess pressures are not necessary condition for the error motions. Additionally, the experiment analysis shows that, the third harmonic component is the main part of the measured radial error motion and the third, fourth harmonic components are the main parts of the measured face error motion, which can be reasonably explained by the theory. The model proposed in this paper can be used to guide the precision design and optimization of hydrostatic spindle.

Relationship between roundness errors of shaft and radial error motions of hydrostatic journal bearings under quasi-static condition

Relationship Between Elliptical Form Error and Rotation Accuracy of Hydrostatic Journal Bearing

Approximate Numerical Solution of Hydrodynamic Gas Journal Bearings

Relationship Between Geometric Errors of Thrust Plates and Error Motions of Hydrostatic Thrust Bearings under Quasi-Static Condition

Prediction of Motion Accuracy in Five Degrees of Freedom for Hydrostatic Rotary Table with Any Recess Number

Effects of Journal Roundness Phase and Amplitude on Lubrication of Engine Bearings with Consideration of Straightness

On the lubrication performance of journal bearing coupled with the axial movement of journal

Influences of Journal with 3D Form Errors on Dynamic Coefficients of Hydrodynamic Bearings Yielded to JFO Boundary Conditions

Lubrication and stability analysis of nonlinear rotor-bearing system

A Study of Misaligned Compliant Journal Bearings Lubricated by Non-Newtonian Fluid Considering Surface Roughness

Analysis of maximum radial load capacity of hydrostatic journal bearing considering supply pressure limitation by a novel method

Numerical simulation of the dynamic fluid–solid coupling in journal bearing with the effect of surface topography in consideration

INFLUENCES OF RADIAL CLEARANCE AND OVALITY ON PERFORMANCE OF ELLIPTICAL HYDROSTATIC JOURNAL BEARING

Analysis of Error Motions of Axial Locking-Prevention Hydrostatic Spindle

Effect of Form Errors on Oil Film Characteristics of Hydrodynamic Journal Bearings Based on Small Displacement Torsor Theory

On the tribo-dynamic behaviors during start-up of water lubricated bearing considering imperfect journal

A Study on Accuracy of Porous Journal Air Bearing

Numerical Calculation of Rotation Effects on Hybrid Air Journal Bearings

Static Characteristics of Four-Lobe Hydrodynamic Journal Bearings with Bottom Sliding Surface Inclined Due to Manufacturing Errors

Model and Algorithm for a Rotor-Bearing System Considering Journal Misalignment

A Generalized Solution on the Static Characteristics of Short Hydrodynamic Journal Bearings Using Harmonic Components