Reversible Mechanofluorochromism and Acidochromism Using a Cyanostyrylbenzimidazole Derivative with Aggregation-Induced Emission

Yong Zhan,Quanpeng Wei,Jinyu Zhao,Xiaojing Zhang

DOI: https://doi.org/10.1039/c7ra09131a

IF: 4.036

2017-01-01

RSC Advances

Abstract:AIE-active cyanostyrylbenzimidazole derivative TBM exhibited reversible mechanofluorochromism and acidochromism characteristics.

What problem does this paper attempt to address?

Multifunctional Fluorescent Materials with Reversible Mechanochromism and Distinct Photochromism

Weihua Luo,Yiyuan Tang,Xin Zhang,Zhen Wu,Guojie Wang

DOI: https://doi.org/10.1002/adom.202202259

IF: 9

2022-12-21

Advanced Optical Materials

Abstract:Two intriguing aggregation‐induced emission fluorogens (AIEgens) with reversible mechanochromism and dual‐mode photochromism are prepared. Upon mechanical stimulation and solvent fuming, the AIEgens exhibit reversible changes in apparent and fluorescent colors. Under photo‐irradiation, the AIEgens display various fluorescence characteristics in solution and aggregated state owing to photoisomerization and photodimerization. These fascinating properties have been explored for rewritable papers and photo‐patterning. It is extremely significant and desirable to integrate the fascinating mechanochromism and photochromism in one simple molecule. Herein, two intriguing cyanostilbene‐containing triphenylamine (TPA)/tetraphenylethylene (TPE) derivatives (Z‐TPA‐MB and Z‐TPE‐MB) are elaborately designed, which not only display excellent aggregation‐induced emission (AIE) properties with high solid‐state fluorescence quantum yields (60.9% and 63.8%) but also exhibit reversible and high contrast mechanochromism and distinct photochromism. The powders of Z‐TPA‐MB and Z‐TPE‐MB both exhibit large red‐shift under mechanical stimulation based on the highly twisted conformation and the resulting loose packing mode, accompanied by significant changes in apparent and fluorescent colors. Meanwhile, their solid‐state fluorescence can be reversibly switched between crystalline and amorphous structures through alternating grinding and solvent fuming, exhibiting good fatigue resistance. In addition, the molecules also exhibit distinct dual‐mode photochromic behaviors owing to the presence of cyanostilbene moieties: under 420/365 nm light irradiation, the fluorescence of which decreases in solution owing to the photo‐isomerization, while decreases and blue‐shifts in the aggregated state owing to the photodimerization reactions. The reversible, tractable, and high‐contrast mechanochromism and distinct photochromism of the cyanostilbene‐containing molecules endow them with excellent application prospects in the field of rewritable papers and photo‐patterning.

materials science, multidisciplinary,optics
Substituent Effects on the Mechanochromic Behavior of Pyrene-Based AIEgens

Guang Yang,Zeng-Min Xue,Ling Liang,Fei Meng,Kai-Yue Liu,Jia-Hao Wang,Hong-Tao Lin,Wen-Xuan Zhao,Shu-Hai Chen,Takehiko Yamato,Carl Redshaw,Chuan-Zeng Wang

DOI: https://doi.org/10.1016/j.jphotochem.2024.116020

2025-01-01

Abstract:It is extremely significant and desirable to integrate the fascinating properties of mechanochromism and aggregation-induced emission (AIE) in one simple molecule. Herein, pyrene-based aggregation-induced emission luminogens (AIEgens) with mechanofluorochromic (MFC) properties solve the traditionally existing aggregation- caused quenching (ACQ) challenge. Three cyanoethylene-functionalized pyrene-based derivatives were designed and synthesized. All compounds exhibit remarkable aggregation-enhanced emission (AEE) activity by a 3-20 times enhancement in mixed H2O/THF 2 O/THF solutions. More importantly, high fluorescence efficiency was recorded in the solid state, especially for the luminogen 2c , with more than 200 times observed increased efficiency from 0.3% in solution to 69.8% in the solid state. Meanwhile, excellent mechanochromism properties and reversibility against the grinding treatment was systematically investigated. The excellent fatigue resistance properties are a necessity for potential applications in the field of anti-counterfeiting fluorescent inks and for the encryption of security information.
Self-reversible mechanofluorochromic AIEgens with tunable solid-state fluorescence: effect of acceptor and intermolecular interactions

Sasikala Ravi,R Rameshbabu Priyadharsan,Subramanian Karthikeyan,Mehboobali Pannippara,Abdullah G. Al-Sehemi,Dohyun Moon,Savarimuthu Philip Anthony

DOI: https://doi.org/10.1039/d4ce00729h

IF: 3.756

2024-08-25

CrystEngComm

Abstract:Exploring the organic molecular structural features and supramolecular interactions provide basis for developing stimuli-responsive organic solid-state fluorescence materials. Herein, we have synthesized methoxyphenyl substituted carbazole based π-conjugated derivatives (Cz-MN, Cz-ECA, Cz-CA, Cz-CAA and Cz-NBA) with different acceptor units and investigated their influence on the solid-state fluorescence. All five compounds showed aggregation induced emission (AIE) in the solid-state with acceptor dependent tunable fluorescence from 488 to 602 nm (quantum yield (f) = 7.2 to 1.9%).Cz-ECA exhibited blue shifted fluorescence whereas Cz-NBA showed red shifted fluorescence. Cz-MN, Cz-ECA and Cz-CA revealed relatively strong solid-state fluorescence compared to Cz-CAA and Cz-NBA. Highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbitals (LUMO) calculation suggested intramolecular charge transfer (ICT) from carbazole donor to acceptor unit. Mechanofluorochromic studies of Cz-MN and Cz-ECA showed self-reversible fluorescence switching but other three AIEgens did not show any stimuli-response. Single crystals structural analysis of Cz-MN, Cz-ECA and Cz-CA showed twisted molecular conformation with different intermolecular interactions. Both Cz-MN and Cz-ECA did not show any strong intermolecular interactions in the crystal lattice. In contrast, Cz-CA exhibited strong amide-amide complimentary H-bonding and extended network structure. Hence, the twisted molecular conformation and the absence of strong intermolecular interactions in Cz-MN and Cz-ECA contributed for self-reversible mechanofluorochromism (MFC). Thus, the present study is expected to provide further insight to design AIEgens with stimuli-responsive self-reversible fluorescence materials.

chemistry, multidisciplinary,crystallography
Aggregation-induced emission enhancement (AIEE)-active mechanofluorochromic tetraphenylethene derivative bearing a rhodamine unit

Ya Yin,Fei Zhao,Zhao Chen,Gang Liu,Shouzhi Pu

DOI: https://doi.org/10.1016/j.tetlet.2018.10.073

IF: 2.032

2018-01-01

Tetrahedron Letters

Abstract:•A novel tetraphenylethene derivative with a rhodamine unit was successfully synthesized.•The compound exhibited significative aggregation-induced emission enhancement (AIEE) feature.•The compound showed reversible mechanochromic behavior involving fluorescent change from orange to red.•The repeatability of mechanofluorochromic behavior of the luminogen was superior.
Phenyl/benzoxazole-extended tetraphenylethene derivatives for reversible mechanochromism and acidichromism

Fanda Feng,Bo Yang,Suqiong Yan,Hui Ma,Tao Tao,Wei Huang

DOI: https://doi.org/10.1016/j.dyepig.2023.111567

IF: 5.122

2023-07-26

Dyes and Pigments

Abstract:Four tetraphenylethene-extended phenyl/benzoxazole compounds ( TPEPBZs 1 – 4 ) were synthesized, which exhibited aggregation-induced emission behavior and multi-stimuli-responsive properties. Single-crystal structural analyses revealed that TPEPBZ-2 possessed the most planar conformation and a unique hydrogen-bonded organic framework structure, resulting in a redshifted emission. After being ground in an agate mortar, the morphologies of TPEPBZs 1 – 4 transformed from crystalline to amorphous state, and their luminescence was simultaneously shifted bathochromically to a green emission. It was proposed that the slight modification of substituents on the aggregation-induced emission luminogens (AIEgens) was a facile strategy to change their solid structures and further mechanochromic contrasts before and after grinding. The initial emission of TPEPBZs 1 – 4 could be returned upon fuming with dichloromethane vapor, indicating reversible mechanochromic properties. Moreover, TPEPBZs 1 – 4 exhibited significant acidichromic behavior. The emission of TPEPBZs 1 – 4 could change reversibly between their initial color and subsequent orange emission under trifluoroacetic acid and triethylamine stimuli. Finally, TPEPBZ-1 with the best mechanochromic and acidichromic properties was successfully applied to paper for anti-counterfeiting applications.

engineering, chemical,chemistry, applied,materials science, textiles
Regulable High-Contrast Mechanofluorochromic Enhancement Behaviour Based on Substituent Effects

Guang Yang,Wen-Xuan Zhao,Jing-Yi Cao,Zeng-Min Xue,Hong-Tao Lin,Shu-Hai Chen,Takehiko Yamato,Carl Redshaw,Chuan-Zeng Wang

DOI: https://doi.org/10.1039/d4cc00476k

IF: 4.9

2024-01-01

Chemical Communications

Abstract:Herein, a facile strategy was established to build mechanoresponsive luminogens with high sensitivity to substituents and positional effects. Even in slightly different structures, distinct optical phenomena, including fluorescence efficiency and mechano-responsive properties, were clearly present. Outstanding mechanical-induced emission enhancement (5-100 times) properties and reversibility makes for promising applications in pressure sensors and OLEDs.
Reversible Thermochromism of Aggregation-Induced Emission-Active Benzophenone Azine Based on Polymorph-Dependent Excited-State Intramolecular Proton Transfer Fluorescence

Ruirui Wei,Panshu Song,Aijun Tong

DOI: https://doi.org/10.1021/jp311020w

2013-01-01

Abstract:In this work, (2-hydroxy-4-methoxyphenyl)(phenyl)-methanone azine (1) was found to exhibit aggregation-induced emission (AIE) and tunable solid fluorescence upon alternate annealing/melting treatments. According to the characterizations by X-ray crystallography, X-ray powder diffraction, and differential scanning calorimetry, the switching between the two different polymorphs was responsible for the tunable solid fluorescence as a consequence of polymorph-dependent excited-state intramolecular proton transfer (ESIPT) fluorescence, while the thermochromism was contributed by the conformational flexibility of rotary phenyl rings. The change in the tightness of packing upon annealing or melting thermal treatments resulted in the emission at different wavelengths. Therefore, polymorph-dependent ESIPT fluorescence could be utilized as a new strategy to develop efficient AIE-active materials in response to external stimuli.
Cyanobenzene-containing tetraphenylethene derivatives with aggregation-induced emission and self-recovering mechanofluorochromic characteristics

Fei Zhao,Congbin Fan,Zhao Chen,Gang Liu,Shouzhi Pu

DOI: https://doi.org/10.1039/c7ra08248g

IF: 4.036

2017-01-01

RSC Advances

Abstract:We report two constitutional isomers based on tetraphenylethene and cyanobenzene units via typical Suzuki coupling reaction. These target luminogens show obvious aggregation-induced emission (AIE) and self-reversible mechanofluorochromic characteristics.
Fine-tuning the Mechanofluorochromic Properties of Benzothiadiazole-Cored Cyano-Substituted Diphenylethene Derivatives Through D–A Effect

Xiqi Zhang,Zhiyong Ma,Yang,Xiaoyong Zhang,Xinru Jia,Yen Wei

DOI: https://doi.org/10.1039/c4tc01457j

IF: 6.4

2014-01-01

Journal of Materials Chemistry C

Abstract:We synthesized three new benzothiadiazole-cored cyano-substituted diphenylethene derivatives (PTOMe, PT-H, and PT-CF3) with different methoxy, hydrogen, and trifluoromethyl end groups, and the synthesis confirmed by standard spectroscopic methods. These end groups endowed them with different donor–acceptor (D–A) effects, and they provide them with a peculiar and completely opposite mechanofluorochromic property. Red-shifted mechanofluorochromic features were found in the PT-OMe and PT-H compounds, while on the contrary, PT-CF3 showed blue-shifted mechanofluorochromic behavior. The mechanofluorochromic mechanism was explored and attributed to the metastable state of the ground compounds and the crystalline-amorphous phase transformation between the original and ground states. Moreover, these derivatives showed reversible significant mechanofluorochromic properties and reproducibility between ground and annealed states, making them promising stimuli-responsive and smart luminescent materials for mechanosensors, fluorescence switches and light-emitting device applications. The introduction of the D–A effect strategy demonstrated in this work would provide a new path to fine tune the optical features of mechanofluorochromic materials with unique and diverse fluorescent properties.
Mechanochromic Behavior of Aryl-Substituted Buta-1,3-diene Derivatives with Aggregation Enhanced Emission.

Yijia Zhang,Ting Han,Shangzhi Gu,Tianye Zhou,Chuanzhen Zhao,Yuexin Guo,Xiao Feng,Bin Tong,J. Bing,Jianbing Shi,Junge Zhi,Yuping Dong

DOI: https://doi.org/10.1002/chem.201403132

2014-01-01

Chemistry

Abstract:Three tetra-aryl substituted 1,3-butadiene derivatives with aggregation enhanced emission (AEE) and mechanochromic fluorescence behavior have been rationally designed and synthesized. The results suggest an effective design strategy for developing diverse materials with aggregation induced emission (AIE) and significant mechanochromic performance by employing D-π-A structures with large dipole moments.
Reversible Multicolor Switching Via Simple Reactions of the AIE-characteristic Molecules

Yahui Zhang,Lingwei Kong,Xiaoling Pan,Huiling Mao,Xiangkai Zeng,Jianbing Shi,Bin Tong,Yuping Dong

DOI: https://doi.org/10.1016/j.dyepig.2016.12.064

IF: 5.122

2016-01-01

Dyes and Pigments

Abstract:A multicolor switching was achieved via simple reversible coordinationand acetalation reaction between aldehydes, tri(pentafluorophenyl)borane (BCF) and methanol. The coordination [HPB -> BCF] of 4,4'[(1E,3E)-1,2,3,4-tetraphenylbuta-1,3-diene-1,4-diy11]- dibenzaldehyde (E,E-HPB) to tri(pentafluorophenyl) borane can change the emissive wavelength from 550 to 630 nm, while transformation of the aldehyde into acetal can change the emissive wavelength from 550 to 530 nm in the presence of methanol. More important, these reactions can access reversibility easily and tune the emission color repeatedly between cyan, yellow and red. All of these dyes show typical aggregation-induced emission (ME) or aggregation enhanced emission (AEE) characteristics. In addition, a tunable photoluminescence mechanism is proposed based on the characterization data including NMR, XRD, MS and IR. The result may provide a new design strategy for the multicolor switches and their related applications. (C) 2017 Elsevier Ltd. All rights reserved.
Reversible Red‐/Blue‐Shifted Mechanofluorochromic Properties of Indole‐Based Difluoroboron Compounds with Aggregation‐Induced Emission

Maocai Xu,Bangcui Zhang,Jiazhuang Tian,Yanhua Yang,Shulin Gao,Fumin Li,Lin Shao

DOI: https://doi.org/10.1002/slct.202303763

2024-02-22

ChemistrySelect

Abstract:Two indole‐based difluoroboron compounds with aggregation‐induced emission activities and reversible mechanofluorochromic behaviors, I‐Ph‐BF2 and I‐PhNp‐BF2, were designed and successfully synthesized. The fluorescence emission of I‐Ph‐BF2 solid powder was red‐shifted from 483 nm to 497 nm under external mechanical force, however, that of I‐PhNp‐BF2 was blue‐shifted from 501 nm to 495 nm. This difference was mainly caused by the change of dipole moments between the ground and excited states. To further explore the relationship between structure and property of the mechanofluorochromic materials, two indole‐based aggregation‐induced emission compounds (I−Ph−BF2 and I−PhNp−BF2) with BF2‐core were designed and synthesized. They displayed intramolecular charge transfer characteristics and dissimilar reversible mechanofluorochromic behaviors (red‐shift for I−Ph−BF2 and blue‐shift for I−PhNp−BF2). Based the powder X‐ray diffraction patterns and quantum chemical calculation results, it was responsible for the blue‐shift mechanofluorochromic behavior of I−PhNp−BF2 that the reduced molecular polarity of the excited state and the undermined partially ordered structure. In contrast, the phase change between an ordered arrangement state and a disordered amorphous state of I−Ph−BF2 solid powder, as well as the appropriate molecular polarity, brought out red‐shift mechanofluorochromic effect. It provided a foundation for further exploration of the mechanofluorochromic property.

chemistry, multidisciplinary
Aggregation-induced emission enhancement (AIEE)-active boron-difluoride dyes with reversible mechanochromic fluorescence

Xiaojing Yan,Pengcheng Zhu,Zhiguo Zhou,Hong Yang,Haichuang Lan,Shuzhang Xiao

DOI: https://doi.org/10.1039/c9ra07437f

IF: 4.036

2019-01-01

RSC Advances

Abstract:A novel class of solid-emissive boron-difluoride derivatives, using phenanthrenequinone hydrazone as ligands, were designed and efficiently synthesized. These dyes exhibit weak fluorescence in dilute solutions, but much higher fluorescence efficiency in aggregate states with a large stokes shift (over 70 nm) due to the their aggregation-induced emission enhancement (AIEE) characteristics. According to their photophysical properties and X-ray single crystal structure analysis, the AIEE was ascribed to the H(J)-aggregate formation aided by multiple intermolecular interactions to restrict intramolecular motion in the solid state. Moreover, their solid emissions could be reversibly tuned between "on" and "off" by mechanical grinding and recrystallization, due to the stacking model transition between H(J)-aggregation with loose molecular packing and J-aggregation with intense intermolecular interactions.
Mechanofluorochromism of difluoroboron β-ketoiminate boron complexes functionalized with benzoxazole and benzothiazole

Jinyu Zhao,Jiang Peng,Peng Chen,Haoran Wang,Pengchong Xue,Ran Lu

DOI: https://doi.org/10.1016/j.dyepig.2017.10.007

IF: 5.122

2018-01-01

Dyes and Pigments

Abstract:New difluoroboron β-ketoiminate boron complexes bearing benzoxazole (CBO) and benzothiazole (CBS) have been synthesized. It was found that CBO was almost non-emissive in THF, and the emission could be intensified significantly when great amount of H2O was added, illustrating AIE (aggregation-induced emission) property. CBS could not show AIE property in THF/H2O system, but its emission in solid state was also strong. The single crystal structure of CBS suggested that π-π interactions and the hydrogen bonds of C(Ar)−F⋅⋅⋅H, C(Ar)−H⋅⋅⋅S and C(Ar)−H⋅⋅⋅Cl would suppress the rotation of single bonds, resulting into obvious emission enhancement. It is interesting that the as-synthesized crystals of CBO and CBS both emitted azure light, and the grinding made their emitting colors to change into cyan and green, which could be recovered under fuming with DCM or heating. The reversible mechanofluorochromism was due to the transformation between crystalline and amorphous states, which could be confirmed from the results of absorption spectra, XRD patterns and DSC curves in different solid states. Additionally, the high-contrast mechanofluorochromism of CBS compared with CBO might be originated from the loose packing in crystalline state and the better π-electron delocalization.
Rational design of reversibly photochromic molecules with aggregation-induced emission by introducing photoactive thienyl and benzothienyl groups

Shasha Zhou,Sidan Guo,Weidong Liu,Qiaoying Yang,Huili Sun,Riqing Ding,Zhaosheng Qian,Hui Feng

DOI: https://doi.org/10.1039/d0tc02297g

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:A general strategy to design reversible photochromic molecules with solid-state fluorescence by introducing photoactive thienyl and benzothienyl groups into an AIE-active molecular skeleton was proposed.

materials science, multidisciplinary,physics, applied
Stimuli-responsive fluorescence switching: Aggregation-induced emission (AIE), protonation effect and reversible mechanofluochromism of tetraphenylethene hydrazone-based dyes

Junhui Jia,Liyu Wu

DOI: https://doi.org/10.1016/j.orgel.2019.105466

IF: 3.868

2020-01-01

Organic Electronics

Abstract:Two new simple and easily prepared TPE-based hydrazone derivatives of isoniazid (TBIH) and benzoyl hydrazide (TBBH) have been designed and synthesized, which showed AIE behavior and remarkable and reversible mechanofluorochromic (MFC) properties. The spectroscopic properties and luminescence color change in the solid state were reversible upon grinding and dichloromethane vapor (DCM) fuming or heating. The crystal structures showed slight disorder that was caused by mechanical grinding, which could be restored by DCM vapor fuming or heating. In addition, the results of powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and field emission scanning electron microscopy (FESEM) revealed that the MFC mechanism was the transformation between ordered crystalline and amorphous states upon external stimuli. Meanwhile, the extension in molecular conjugation caused by planarization of molecular conformation and subsequent planar intramolecular charge transfer (PICT) process were responsible for the red-shifts in the fluorescence spectra. Interestingly, protonation-deprotonation of the pyridine moiety in TBIH had a significant effect on the frontier molecular orbitals as well as very distinctive emission characteristics upon acid and base stimuli. The dual-response performance and the ease of its preparation and renewal endow the material with potential applications in pressure and acid/alkali fluorescence sensing.
Tetraphenylethylene fused pyrrolo[3,2-b]pyrrole derivatives with reversible mechanofluorochromic and aggregation-induced emission enhancement characteristics

Jiaxiu Yang,Nuonuo Zhang,Xinglong Cai,Kaibo Zheng

DOI: https://doi.org/10.1016/j.jlumin.2024.120467

IF: 3.6

2024-01-25

Journal of Luminescence

Abstract:Modification on typical of molecular unit with aggregation-induced emission (AIE)/aggregation-induced emission enhancement (AIEE) can play a important role in obtaining solid-state fluorescence materials and mechanofluorochromic (MFC) materials. We utilize the multicomponent reaction of TPE-containing aldehyde, arylamine and butane-2,3-dione in the presence of iron(III) perchlorate to design and synthesize two novel MFC materials by combination of the tetraphenylethylene (TPE) and pyrrolo [3,2-b]pyrrole core units. Investigation of CHW-1 and CHW-2 aggregation-induced emission behaviors indicated that these materials all exhibited AIEE properties. Subsequent mechanochromic luminescence tests exhibited reversible mechanochromism natures that involve fluorescent color change from green to yellow (Grinding-induced spectral shift (△λ): 35 nm and 38 nm, respectively). Then the datas (including SEM, PXRD and DSC) revealed that this mechanofluorochromism was ascribed to the transformation of crystal state to the amorphous form. Moreover, CHW-1 and CHW-2 could be applied for optical recording devices and security printing.

optics
A Novel Strategy to Design and Construct AIE-active Mechanofluorochromic Materials Via Regulation of Molecular Structure

Kaibo Zheng,Hui Chen,Yufeng Xiao,Xiang Liu,Jiaying Yan,Nuonuo Zhang

DOI: https://doi.org/10.1002/chem.202102578

2021-01-01

Chemistry - A European Journal

Abstract:In this work, we first designed and synthesized tetraphenylene-fused aryl-imidazole derivatives TM-1-4 via regulation of molecular structure, which were consisted of 1H-imidazo[4,5-f][1,10]phenanthroline, 1H-phenanthro[9,10-d]imidazole, 4,5-diphenyl-1H-imidazole, 3,3 '-(1H-imidazole-4,5-diyl)dipyridine moieties and AIE-active tetraphenylethene units, respectively. The results illustrated that TM-1-4 exhibited clear AIE characteristics. Meanwhile, TM-2 and TM-3 show excellent solid emission properties (phi(TM-2)=13.73 % and phi(TM-3)=36.21 %), whereas TM-1 and TM-4 exhibit the opposite properties (phi(TM-1)=1.48 % and phi(TM-4)=4.83 %). The multiple rotors (pyridine and benzene ring) causes twisted conformations of the molecule that prevents pi-pi stacking and enhances solid emission(phi TM-2TM-3, phi TM-1TM-4). Significantly, TM-2 and TM-3 also exhibited reversible mechanochromic behavior (Emission red shifts: Delta lambda(TM-2)=43 nm and Delta lambda(TM-3)=41 nm) with color changes between blue and green emissions. The powder X-ray diffraction (PXRD) suggested the disordered state of ground sample could be readily returned to an ordered crystalline. Therefore, the mechanochromisms of TM-2 and TM-3 are ascribable to the phase transformation between crystal and amorphous structure. The single crystal X-ray analysis of TM-2 reveals a twisted conformation for TPE moiety and the absence of pi-pi intermolecular stacking. These excellent optical properties of TM-2 and TM-3 make them potentially applications in mechanochromic materials and imaging agents.
A Highly Reversible Mechanochromic Difluorobenzothiadiazole Dye with Near-Infrared Emission

Jianhua Chen,Dongyang Li,Weijie Chi,Guotao Liu,Sheng Hua Liu,Xiaogang Liu,Chun Zhang,Jun Yin

DOI: https://doi.org/10.1002/chem.201705780

2018-01-01

Chemistry - A European Journal

Abstract:A difluorobenzothiadiazole-based fluorescent material with a D-pi-A-pi-D structure exhibits a reversible mechanofluorochromic characteristic in the solid state. Its red fluorescent emission switches to near-infrared fluorescence upon mechanical stimulation, but recover after fuming the ground solid powder with dichloromethane.
AIE-active non-planar phenothiazine-based derivatives with mechanical-induced emission enhancement characteristic

Huizhuan Zhu,Jing Zhang,Huijuan Zhang,Chuchu Han,Ting Xu,Jiakun Bai,Peng Jiang,Junhui Jia

DOI: https://doi.org/10.1039/d3nj04486f

IF: 3.3

2023-10-29

New Journal of Chemistry

Abstract:Two new mechanofluorochromic-active AIE non-planar phenothiazine-based dyes (E)-N'-((10-ethyl-10 H -phenothiazin-3-yl)methylene)-4-methylbenzenesulfonohydrazide (EPMMBS) and (E)-N'-((10-ethyl-10 H -phenothiazin-3-yl)methylene) benzenesulfonohydrazide (EPMBS) were designed and successfully fabricated by simple one step aldimine condensation reaction strategy. The synthesized compounds EPMBS and EPMMBS with subtle different electron-withdrawing moieties disclosed distinct mechanofluorochromic phenomenon via fluorescence color and emission intensity changes upon mechanical grinding. The mechanofluorochromism was supported by PXRD (powder X-ray diffraction) and FESEM (field emission scanning electron microscopy)the powder XRD and FESEM analysis due to the phase transition between well-organized crystalline and the amorphous phase. Our work would provide a promising way for designing more mechanofluorochromic materials.

chemistry, multidisciplinary

Reversible Mechanofluorochromism and Acidochromism Using a Cyanostyrylbenzimidazole Derivative with Aggregation-Induced Emission

Multifunctional Fluorescent Materials with Reversible Mechanochromism and Distinct Photochromism

Substituent Effects on the Mechanochromic Behavior of Pyrene-Based AIEgens

Self-reversible mechanofluorochromic AIEgens with tunable solid-state fluorescence: effect of acceptor and intermolecular interactions

Aggregation-induced emission enhancement (AIEE)-active mechanofluorochromic tetraphenylethene derivative bearing a rhodamine unit

Phenyl/benzoxazole-extended tetraphenylethene derivatives for reversible mechanochromism and acidichromism

Regulable High-Contrast Mechanofluorochromic Enhancement Behaviour Based on Substituent Effects

Reversible Thermochromism of Aggregation-Induced Emission-Active Benzophenone Azine Based on Polymorph-Dependent Excited-State Intramolecular Proton Transfer Fluorescence

Cyanobenzene-containing tetraphenylethene derivatives with aggregation-induced emission and self-recovering mechanofluorochromic characteristics

Fine-tuning the Mechanofluorochromic Properties of Benzothiadiazole-Cored Cyano-Substituted Diphenylethene Derivatives Through D–A Effect

Mechanochromic Behavior of Aryl-Substituted Buta-1,3-diene Derivatives with Aggregation Enhanced Emission.

Reversible Multicolor Switching Via Simple Reactions of the AIE-characteristic Molecules

Reversible Red‐/Blue‐Shifted Mechanofluorochromic Properties of Indole‐Based Difluoroboron Compounds with Aggregation‐Induced Emission

Aggregation-induced emission enhancement (AIEE)-active boron-difluoride dyes with reversible mechanochromic fluorescence

Mechanofluorochromism of difluoroboron β-ketoiminate boron complexes functionalized with benzoxazole and benzothiazole

Rational design of reversibly photochromic molecules with aggregation-induced emission by introducing photoactive thienyl and benzothienyl groups

Stimuli-responsive fluorescence switching: Aggregation-induced emission (AIE), protonation effect and reversible mechanofluochromism of tetraphenylethene hydrazone-based dyes

Tetraphenylethylene fused pyrrolo[3,2-b]pyrrole derivatives with reversible mechanofluorochromic and aggregation-induced emission enhancement characteristics

A Novel Strategy to Design and Construct AIE-active Mechanofluorochromic Materials Via Regulation of Molecular Structure

A Highly Reversible Mechanochromic Difluorobenzothiadiazole Dye with Near-Infrared Emission

AIE-active non-planar phenothiazine-based derivatives with mechanical-induced emission enhancement characteristic