Abstract:Computational methods were used to analyse the elasto-hydrodynamic lubrication of a complex rotor–bearing system. The methodology employed computational fluid dynamics (CFD), based on the Navier–Stokes equation and a fluid–structure interaction (FSI) technique. A series of models representing the system were built using the CFD–FSI methodology to investigate the interaction between the lubrication of the fluid film, and elastic dynamics of the rotor and journal bearing. All models followed an assumption of isothermal behaviour. The FSI methodology was implemented by setting nodal forces and displacements to equilibrium at the fluid–structure interface, therefore allowing the lubrication of the fluid and the elastic deformation of structures to be solved simultaneously. This is significantly different to the more common techniques—such as the Reynolds equation method—that use an iterative solution to balance the imposed load and the force resulting from the pressure of the fluid film to within a set tolerance. Predictions using the CFD–FSI method were compared with the results of an experimental study and the predictions from an ‘in-house’ lubrication code based on the Reynolds equation. The dynamic response of the system was investigated with both rigid and flexible bodies for a range of different bearing materials and dynamic unbalanced loads. Cavitation within the fluid film was represented in the CFD–FSI method using a simplified phase change boundary condition. This allowed the transition between the liquid and vapour phases to be derived from the lubricant’s properties as a function of pressure. The combination of CFD and FSI was shown to be a useful tool for the investigation of the hydrodynamic and elasto-hydrodynamic lubrications of a rotor–bearing system. The elastic deformation of the bearing and dynamic unbalanced loading of the rotor had significant effects on the position of its locus.

Analysis on Discharge Coefficients in FEM Modeling of Hybrid Air Journal Bearings and Experimental Validation

Numerical simulation of flow and heat transfer in journal bearing lubrication

Lubrication Analysis of Journal Bearing and Rotor System Using Cfd and Fsi Techniques

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Finite Element Analysis on Dynamic Characteristics of Hybrid Bearing Spindle System

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer

Numerical Calculation of Rotation Effects on Hybrid Air Journal Bearings

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

An Efficient Modeling Method for the Simulation of Ball Bearing Dynamics

Stiffness and Damping Coefficients for Journal Bearing Using the 3d Transient Flow Calculation

A Numerical Method for Solution of the Discharge Coefficients in Externally Pressurized Gas Bearings with Inherent Orifice Restrictors

Numerical Calculation of Fluid Film Force on Journal Bearings Based on a Biconjugate Gradient-Stabilized Algorithm

Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3d Transient Flow of Journal Bearings Coupled with Rotor Systems

Numerical Investigation on Dynamic Characteristics of Hydrodynamic Bearing

Theoretical and Experimental Study on Dynamic Coefficients and Stability for a Hydrostatic/Hydrodynamic Conical Bearing

Research on problems concerning solutions for the performance of a hybrid gas journal bearing based on the finite difference method

Experimental Study On Dynamic Coefficients Of Water Lubricated High-Speed Hybrid Bearings With Stepped Recesses

Numerical calculation method of dynamic characteristics of journal bearing

Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System