Fe-based Metal Organic Framework/graphene Oxide Composite As an Efficient Catalyst for Fenton-like Degradation of Methyl Orange

Juntao Tang,Jianlong Wang

DOI: https://doi.org/10.1039/c7ra10145g

IF: 4.036

2017-01-01

RSC Advances

Abstract:A MIL-100(Fe)/graphene oxide (GO) composite was prepared by a one-step hydrothermal method and utilized as a heterogeneous Fenton-like catalyst for methyl orange (MO) degradation.

What problem does this paper attempt to address?

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

Ning Huang,Hannah Drake,Jialuo Li,Jiandong Pang,Ying Wang,Shuai Yuan,Qi Wang,Peiyu Cai,Junsheng Qin,Hong-Cai Zhou

DOI: https://doi.org/10.1002/anie.201803096

2018-01-01

Angewandte Chemie

Abstract:The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal-organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one-pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball-and-stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.
MOF/graphene Oxide Composite As an Efficient Adsorbent for the Removal of Organic Dyes from Aqueous Solution.

Shuai Luo,Jianlong Wang

DOI: https://doi.org/10.1007/s11356-017-0932-z

IF: 5.8

2017-01-01

Environmental Science and Pollution Research

Abstract:The metal-organic frameworks (MOFs) MIL-100(Fe) and graphene oxide (GO) composites were prepared by hydrothermal method and characterized by X-ray diffraction (XRD), nitrogen adsorption/desorption, thermal-gravimetric (TG) analysis, the Fourier Transform Infrared Spectroscopy (FTIR), and scanning electron microscopy (SEM). The composites were used for the adsorption of methylene blue (MB) and methyl orange (MO) in aqueous solution. The results indicated that MIL-100(Fe) and GO formed a sandwich-like structure, and the crystal structure of MIL-100(Fe) was reserved in the composites. The attachment of GO layers to the MIL-100(Fe) decreased the surface area from 1690 to 1602 m2/g, and pore volume from 0.996 to 0.770 cm3/g when 5% (w/w) GO was added, due to the coating of MIL-100(Fe) by GO sheets. The addition of 5% (w/w) GO increased the adsorption capacity for MB (from 1019 to 1231 mg/g) and MO (from 667 to 1189 mg/g). The composites showed a better thermal stability than MIL-100(Fe); the decomposition temperature increased from 280 to 350 °C. The addition of GO improved the properties of MIL-100(Fe) as an adsorbent for MO/MB from aqueous solution.
Ultrathin Graphene Oxide Encapsulated in Uniform MIL-88A(Fe) for Enhanced Visible Light-Driven Photodegradation of RhB

Ning Liu,Wenyuan Huang,Xiaodong Zhang,Liang Tang,Liang Wang,Yuxin Wang,Minghong Wu

DOI: https://doi.org/10.1016/j.apcatb.2017.09.020

2018-01-01

Abstract:It is very important to design excellent heterojunction structure for the improvement of the photocatalytic performance. In this study, we report a facile approach of polymerizing the ultrathin graphene oxide on the surface of the MIL-88A(Fe) to form MIL-88A(Fe)/grapheme oxide composite for enhancing the photocatalytic efficiency of organic molecules degradation. The optical grapheme oxide doping content in MIL-88A(Fe)/grapheme oxide hybrid is determined to be 9.0 wt%, which increases the surface area of the MOFs from 15.9 m(2)g(-1) to 408.9 M(2)g(-1) due to the emerging micropores, and the corresponding photocatalytic rate for RhB is 8.4 times higher than that of pure MIL-88A(Fe). Meanwhile, DMF-free MOF-based heterostructure could avoid secondary contamination in the photocatalytic application process, and the degree of RhB removal is maintained at about 100% after the five cycles of the reaction. Integrating the related electrochemical analysis and the active species trapping experiments, the decisive factors for the improved photocatalytic efficiency of MIL-88A(Fe)/grapheme oxide may be the unique structural advantages of ultrathin grapheme oxide sheets, compact and uniform interface contact, more adsorption sites and more reaction sites. This work provides a novel sight for preparing high-efficient and environment-stable photocatalysts by designing the surface heterojunction structure.
The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

Minmin Sun,Chengxian Wang

DOI: https://doi.org/10.1016/j.heliyon.2024.e24772

IF: 3.776

2024-02-02

Heliyon

Abstract:In this work, the ferrous (Fe 2+ ) and graphitic N modified graphene-based composite cathode materials (N-rGO/Fe 3 O 4 ) were developed through an in-situ reduction method, aiming to facilitate the two-electron pathway in the oxidation-reduction process. This approach generated a specific concentration of H 2 O 2 , enabling the construction of a sediment bio-electro-Fenton system using Fe 2+ released from the cathode materials. Notably, this system operates without the need for proton exchange membranes. During the cathode material preparation, the utilization of Fe 2+ as a reduction agent for graphene oxide (GO), triggered ammonia water to form graphitic N in graphene sheets. This addition enhanced the two-electron pathway, resulting in increased H 2 O 2 production. Specifically, when the Fe 2+ concentration was maintained at 0.1 mol/L, precise preparation of N-rGO/Fe 3 O 4 occurred, leading to a maximum output voltage of 0.528 V and a maximum power density of 178.17 mW/m 2 . The degradation of methyl orange (MO) reached 68.91% within a 25-h period, a phenomenon contributed to the presence of graphitic N in the graphene sheets. H 2 O 2 , a byproduct of the two-electron pathway in cathode oxidation reduction reaction, played a crucial role in constructing the bio-electro-Fenton system. This system, in conjunction with Fe 2+ released from N-rGO/Fe 3 O 4 , facilitated the complete degradation process of MO.
Facile Self-Assembly Synthesis of Γ-Fe2o3 /graphene Oxide for Enhanced Photo-Fenton Reaction.

Feifei Wang,Xiaolin Yu,Maofa Ge,Sujun Wu,Juan Guan,Junwang Tang,Xiao Wu,Robert O Ritchie

DOI: https://doi.org/10.1016/j.envpol.2019.01.018

2019-01-01

Abstract:A novel self-assembly method was developed to prepare a γ-Fe2O3/graphene oxide (GO) heterogeneous catalyst that showed excellent synergy between photocatalysis and Fenton-like reactions. The γ-Fe2O3/GO catalyst prepared on the iron plates demonstrated efficient and reproducible catalytic activities for water treatment. It takes only 80 min to degrade 50 mg L-1 methylene (MB) completely, which is the main non-biodegradable dye in wastewater from the textile industry. The heterogeneous catalyst is stable over a wide range of pH (from 2.0 to 10.2) for MB degradation, and can be easily extracted from solution and repeatedly used with little loss of catalytic activity. The high activity and stability of the catalyst system can be attributed to charge separation between γ-Fe2O3 and GO, which could accelerate Fenton-like process and photocatalysis. In addition, the dominant reactive oxidant species responsible for the MB degradation, including the hydroxyl radicals (•OH) and holes (h+), were trapped on the surface of the γ-Fe2O3/GO composite, as proved by a free-radical quenching experiment. The γ-Fe2O3/GO heterogeneous catalyst could potentially provide a solution for removal of non-biodegradable dyes from wastewater in the textile industry.
TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Yang Li,Huijie Zhao,Mujie Yang

DOI: https://doi.org/10.1016/j.jcis.2017.08.076

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:In this paper, a photocatalyst composed of TiO2 nanoparticles supported on the nanofibers of poly(methyl methacrylate) (PMMA) was successfully prepared by hydrothermally treating the electrospun PMMA nanofibers containing titanium n-butoxide precursor at 135°C for 8h. As-prepared composite was characterized by field-emission scanning electron microscopy, X-ray diffraction pattern, thermal gravimetric analysis and Brunauer–Emmett–Teller (BET) surface area measurements. It is revealed that high content (42%) of tetragonal anatase TiO2 nanoparticles are uniformly loaded on the PMMA nanofibers to constitute the composite (TiO2@PMMA) photocatalyst with BET surface area of 21.4m2g−1. The photocatalytic activity of TiO2@PMMA towards the degradation of methyl orange (MO), a model pollutant, has been investigated. It is observed that 0.1g of the composite could degrade 100mL of MO (10mg/L) completely within 50min under UV illumination, exhibiting a high catalytic activity. Moreover, the composite could be easily separated from the reaction system by filtration, and maintain high photocatalytic activity in five consecutive cycles of the degradation of MO, suggesting its potentials in recycling use. The work provides a new approach for the development of novel supported photocatalysts with high catalytic activity and good reusability.
Preparation of Fe 3 O 4 @GO@MIL-101 nanocomposites and efficient degradation of oxytetracycline hydrochloride by promoting charge separation during the photo-Fenton process

Lin He,Jiabin Zhou,Dan Liu,Yajie Wen,Yuxin Gan

DOI: https://doi.org/10.1016/j.mssp.2023.108050

IF: 4.1

2023-12-17

Materials Science in Semiconductor Processing

Abstract:The combination of photocatalysis and Fenton oxidation technology is an efficient strategy to improve the efficiency of oxytetracycline hydrochloride (OTC-HCl) degradation. Herein, a Fe 3 O 4 @GO@MIL-101 composite catalyst bridged with graphene oxide (GO) was obtained by a two-stage hydrothermal method. The introduced graphene oxide layer could inhibit the recombination of electron hole (e − - h + ) pairs by attracting photo-generated electrons from MIL-101 and transferring them to Fe 3 O 4 , observably enhancing the photocatalytic performance of the composite Fe 3 O 4 /MOFs. Under the optimal conditions (initial pH, 10 mmol H 2 O 2 , 0.01 g/L catalyst), the Fe 3 O 4 @GO@MIL-101 + H 2 O 2 +Vis system could achieve a degradation effect of 97.26 % on 70 mg/L OTC-HCl within 50 min Fe 3 O 4 @GO@MIL-101 nanocomposites exhibited good recyclability, were easy to recover after multiple uses, and maintained excellent removal efficiency for pollutants. A series of data demonstrated that in Fe 3 O 4 @GO@MIL-101 + H 2 O 2 +Vis system, the primary active substances involved in OTC-HCl degradation were holes and superoxide radicals, while the contributions of hydroxyl radicals and photo generated electrons were relatively weak. Finally, based on various characterization results and catalyst activity performance, a feasible mechanism for the removal of OTC-HCl by Fenton-like system was proposed.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
A novel Fe/Mo co-catalyzed graphene-based nanocomposite to activate peroxymonosulfate for highly efficient degradation of organic pollutants

Hao Liu,Chao Huang,Ping Wang,Su Huang,Xiong Yang,Haiyin Xu,Jian Zhu,Dingxun Ling,Chonglin Feng,Zhiming Liu

DOI: https://doi.org/10.1016/j.envres.2022.114233

IF: 8.3

2022-12-01

Environmental Research

Abstract:A novel 3D α-FeOOH@MoS2/rGO nanocomposite was successfully fabricated by a simple in situ hydrothermal method. It is a highly efficient heterogeneous catalyst in activation of peroxymonosulfate (PMS) for rapid degradation of rhodamine B (RhB), with 99.9% of RhB removed within 20 min. The introduction of rGO contributes to uniform dispersion and sufficient contact of α-FeOOH and MoS2 nanosheets. Highly active Mo(IV) enhances the reduction of Fe(III), improves Fe(III)/Fe(II) conversion and promotes the generation of O21, which ensures an improved catalytic activity. MoS2/rGO hybrid can effectively solve the problem of material reunion and make α-FeOOH exhibit excellent catalytic performance. The α-FeOOH@MoS2-rGO/PMS system is a co-catalytic system based on the active components of α-FeOOH and MoS2. The main reactive oxygen species in the α-FeOOH@MoS2-rGO/PMS system are O21, SO4.− and ⋅O2−, which contribute to a high reactivity over a wide range of pH (5–9). Besides, this system is highly resistant to anions (Cl−, SO42−) and natural organic matter (humic acid), and can be widely used for degradation of common organic pollutants. The α-FeOOH@MoS2/rGO is a promising Fenton-like catalyst for refractory organic wastewater treatment.

environmental sciences,public, environmental & occupational health
Fenton-like degradation of methyl orange over CeO2 loaded on porous Al2O3: Catalyst preparation, efficiency and mechanism

Xue-Qiang Yuan,Huan-Yan Xu,Bo Li,Li-Yuan Dai,Wei-Song Wang,Yang Li

DOI: https://doi.org/10.1016/j.jpcs.2023.111314

IF: 4.383

2023-07-01

Journal of Physics and Chemistry of Solids

Abstract:In this work, the CeO2/Al2O3 composites were prepared by in situ growth method and developed as the heterogeneous Fenton-like catalyst for efficiently catalytic degradation of methyl orange (MO). Porous Al2O3 was firstly prepared by an evaporation-sintering method, and then the CeO2/Al2O3 composites were constructed by the in situ growth of CeO2 onto porous Al2O3. The phases and morphologies of the porous Al2O3 and CeO2/Al2O3 composites were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and specific surface area and pore size analyzer. The results indicated that the higher amount of the porogenic agent (NH4Cl) could make the specific surface area of porous Al2O3 larger and the Fenton-like reaction efficiency of CeO2/Al2O3 better. Free radical trapping experiments showed that the singlet oxygen (1O2) was the main reactive oxygen species responsible for the MO degradation. Finally, the possible mechanism of the Fenton-like reaction catalyzed by CeO2/Al2O3 was proposed and discussed.

physics, condensed matter,chemistry, multidisciplinary
Magnetic Fe 3 O 4 nanoparticles supported on carbonized corncob as heterogeneous Fenton catalyst for efficient degradation of methyl orange

Chen Chen,Zeming Yan,Zhuoli Ma,Dianjie Ma,Shijun Xing,Wenping Li,Jiazhi Yang,Qiaofeng Han

DOI: https://doi.org/10.1016/j.cjche.2024.09.029

IF: 3.8

2024-11-24

Chinese Journal of Chemical Engineering

Abstract:The pollution especially organic dyes pollution of water resources is an urgent issue to be solved. It is crucial to develop highly efficient, low cost and recyclable heterogeneous catalysts for wastewater treatment. In this study, a heterogeneous Fenton catalyst loaded with Fe 3 O 4 nanoparticles was prepared by one step pyrolysis using natural crop waste corncob as carbon source. The prepared porous carbon catalyst can effectively degrade methyl orange (MO, 25 mg·L –1 ) at room temperature, and the degradation rate is 99.7%. In addition to high catalytic degradation activity, the layered porous carbon structure of the catalyst also provides high stability and reusability. The degradation rate can be maintained above 93% after 10 cycles. Furthermore, the prepared catalyst is magnetic, which makes the catalyst easy to recycle in practical applications. In addition, the prepared Fe 3 O 4 /RCC catalyst has efficient Fenton degradation activity for bisphenol A (BPA) (96.9%) and antibiotic tetracycline hydrochloride (TC-HCl) (95.5%), which proves that it has universal applicability for the degradation of most organic pollutants. This study provides a feasible and scalable strategy to prepare a heterogeneous Fenton catalyst treating wastewater and high-value utilization of biomass waste.

engineering, chemical
MOF-5/Graphene Oxide Composite Photocatalyst for Enhanced Photocatalytic Activity of Methylene Blue Degradation Under Solar Light

DOI: https://doi.org/10.1007/s10904-023-02668-y

IF: 3.518

2023-05-03

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:This work focuses on the degradation of methylene blue dye using graphene oxide and metal–organic frameworks (MOFs). In particular, the performance of these materials towards the photocatalytic of methylene blue dye (MB) under sun irradiation was investigated. To this aim, graphene oxide (GO) and metal–organic framework (MOF-5) were synthesized using the modified Hummer's method and room temperature method respectively. Our resulting composites MOF-5/GO contain 5 and 10 wt% of GO. X-Ray Diffraction (XRD), FTIR spectroscopy, Thermogravimetric Analysis (TGA), and UV–Vis spectroscopy were used to characterize the structure and the thermal stability of the synthesized materials. The degradation of methylene blue was performed under varying conditions of pH and mass ratio. Our results indicate that, for the degradation of methylene blue dye under 390 min of solar exposure, the hybrid materials MOF-5/GO exhibit a remarkable photocatalytic efficiency when compared to the pure MOF-5. MOF-5/GO achieved 92% degradation at pH = 6.8 of MB. The reduced band gap, various functional groups and an adequate supply of active sites also are additional advantages in this design. The kinetic indicates that the Langmuir–Hinshelwood (L–H) model is well adapted to the experimental data. We demonstrated, using a linear fit that the degradation obeys a pseudo-first-order kinetic with apparent constants of 0.0369 and 0.0396 min −1 for MOF-5/GO5 and MOF-5/GO10 respectively. In contrast, in the case of a reaction with the highest activity, a nonlinear technique method was used to obtain the apparent reaction rate constants. Finally, the improved photocatalytic mechanism over MOF-5/GO was also suggested. The hybrid combination of MOF-5 and GO confers a synergistic effect that is crucial for delaying the rate of photogenerated electron–hole recombination and maximizing charge transfer throughout the entire hybrid system structure, leading to a high efficiency photocatalytic performance.

polymer science
Preparation of a GO/MIL-101(Fe) Composite for the Removal of Methyl Orange from Aqueous Solution

Zhuannian Liu,Wenwen He,Qingyun Zhang,Habiba Shapour,Mohammad Fahim Bakhtari

DOI: https://doi.org/10.1021/acsomega.0c05091

IF: 4.1

2021-02-08

ACS Omega

Abstract:The composite material graphene oxide (GO)/MIL-101(Fe) was prepared by a simple one-pot reaction method. MIL-101(Fe) grown on the surface of a GO layer was confirmed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The adsorption performance and the mechanism of MIL-101(Fe) and GO/MIL-101(Fe) for methyl orange (MO) were studied. The results have shown that the adsorption capacity of GO/MIL-101(Fe) for MO was significantly better than that of MIL-101(Fe), and its capacity was the highest when 10% GO was added. The Langmuir specific surface areas of MIL-101(Fe) and GO/MIL-101(Fe) were 1003.47 and 888.289 m2·g–1, respectively. The maximum adsorption capacities of MO on MIL-101 (Fe) and 10% GO/MIL-101 (Fe) were 117.74 and 186.20 mg·g–1, respectively. The adsorption isotherms were described by the Langmuir model, and the adsorption kinetic data suggested the pseudo-second order to be the best fit model. GO/MIL-101(Fe) can be reused at least three times.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Accelerating Fe(Iii)/Fe(Ii) Cycle Via Fe(Ii) Substitution For Enhancing Fenton-Like Performance Of Fe-Mofs

Taoyu Yang,Deyou Yu,Dong Wang,Tao Yang,Zexiong Li,Minghua Wu,Michal Petru,John Crittenden

DOI: https://doi.org/10.1016/j.apcatb.2020.119859

2021-01-01

Abstract:Metal-organic frameworks (MOFs), especially iron-based MOFs (Fe-MOFs), are deemed as promising Fenton-like catalysts due to their well-developed pores and accessible active sites. However, the Fenton-like performance of Fe-MOFs is limited by the relatively low redox rate of Fe(III)/Fe(II) couples and density of coordinatively unsaturated iron centers (CUICs), which depend on the intrinsic structure of iron-oxo nodes in Fe-MOFs. Herein, we manipulated the structure of iron-oxo nodes in MIL-53(Fe) via a Fe(II) substitution method, affording a mixed-valence (i.e., Fe(II)/Fe(III)) material (denoted as Fe-II-MIL-53(Fe)) with highly improved Fenton-like performance. The substituted Fe(II) centers could serve as stronger active sites, where Fe(II)-> Fe(III) half-reaction occurs, over original Fe(III) centers to rapidly activate H2O2 for efficient destruction of 4-nitrophenol (4-NP). Meanwhile, Fe(II) substitution induced the formation of a larger amount of Fe(III) CUICs, which was proven by the increased Lewis acidity of MIL-53(Fe). The increased density of Fe(III) CUICs promoted the interaction between Fe(III) centers and H2O2 and thus rendered another half-reaction, Fe(III)-> Fe(II), with a greater rate. Accordingly, the accelerated cycle of Fe(III)/Fe(II) couples favored (OH)-O-center dot generation for improving 4-NP degradation. As a result, the 4-NP degradation and rate on Fe-II-MIL-53(Fe) were 1.39 and 9.48 times higher than that on pristine MIL-53(Fe). Moreover, Fe-II-MIL-53(Fe) showed a good stability and reusability over multiple cycles. Our work provides insights into the rational design of Fe-MOFs as promising Fenton-like catalysts for advanced water/wastewater treatment.
Highly photocatalytic activity of novel Fe-MIL-88B/GO nanocomposite in the degradation of reactive dye from aqueous solution

Tuan A Vu,Giang H Le,Hoa T Vu,Kien T Nguyen,Trang T T Quan,Quang K Nguyen,Hoa T K Tran,Phuong T Dang,Loi D Vu,Gun D Lee

DOI: https://doi.org/10.1088/2053-1591/aa6079

IF: 2.025

2017-03-28

Materials Research Express

Abstract:An Fe-MIL-88B/graphene oxide (GO) composite was successfully synthesized by the hydrofluoric acid (HF) free-solvothermal method. The sample was characterized by x-ray diffraction (XRD), N2 adsorption–desorption Brunauer−Emmett−Teller (BET) method, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and x-ray photoelectron spectroscopy (XPS). BET shows that Fe-MIL-88B/GO is of a mesoporous structure, while XRD and XPS results reveal that besides the Fe-MIL-88B phase, a new α-FeOOH phase in the novel Fe-MIL-88B/GO composite is formed. The as-prepared Fe-MIL-88B/GO nanocomposite was used to test the photocatalytic degradation of reactive dye (reactive red-RR195) from aqueous solution. This novel metal-organic framework (MOF)/GO composite exhibited excellent photocatalytic activity. Thus, after 25 min of reaction under simulated sunlight irradiation, removal efficiency reached 98%. Moreover, this composite still maintained high photocatalytic activity after three cycles of reaction runs, indicating its high stability and reusability. This opens a new application potential for MOF/GO as a highly efficient photo-Fenton catalyst.

materials science, multidisciplinary
Toward efficient removal of organic pollutants in water: A tremella-like iron containing metal-organic framework in Fenton oxidation

Jiyang Liu,Haojie Yu,Li Wang

DOI: https://doi.org/10.1080/09593330.2021.1903564

IF: 3.475

2021-03-25

Environmental Technology

Abstract:The treatment of wastewater containing organic pollutants has become a serious issue, and one of the advanced oxidation process, Fenton oxidation is recognized as an ideal way owing to its universality and environmental friendliness, thus efficient and economic catalysts are in great demand. Herein by incorporating Fe2+ containing compound as ligand, a tremella-like iron containing metal–organic framework (TFMOF) was synthesized with zirconium acetate and 1,1′-ferrocene-dicarboxylic acid though a facile solvothermal method. The TFMOF combined the merits of both ferrocene moiety with well dispersed Fe2+ sites in the molecular level and MOF films with large surface areas and exposed sites. And the morphology and crystal structure of TFMOF were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Moreover, employed as an effective catalyst in Fenton oxidation, over 99%, 95% and 97% of rhodamine B, methyl orange and reactive black V were rapidly degraded without the assistance of additional irradiation, and degradation conditions like pH, H2O2 and initial pollutant concentrations as well as the reaction kinetic was investigated, indicating the hydroxyl radical generated in the presence of TFMOF and H2O2 was able to degrade the pollutants into non-toxic molecular. Besides, the catalytic activity of TFMOF maintained well after three cycles. The good activity and universality of TFMOF make it a promising catalyst for the treatment of wastewater.GRAPHICAL

environmental sciences
Synthesis of Uniformly Covered Fe-MOF@COF Heterostructures for Boosting Photo-Fenton Catalysis

Xue-Feng Zhang,Tian-Long Chang,Na Guo,Guo-Liang Jia,Xiao-Bing Li,Zhao-Ye Zhao,Hui Wang,Jun-Chuan Wang,Xiang-Feng Wu,Cheng-Si Pan,Lei Liu,Lin-Lin Yang

DOI: https://doi.org/10.1007/s10904-023-02893-5

IF: 3.518

2023-10-25

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:Fe-based MOFs (Fe-MOFs) are excellent photocatalysts and have synergy well with Fenton reagents relative to other MOFs. In this work, a series of uniformly covered NH2-Fe-MIL-88B@TpPa-1-COF composites were synthesized using an in-situ anchoring growth strategy, which used F127 as functional molecule to decorate NH2-Fe-MIL-88B nanoparticles to eliminate their surface electrostatic repulsion with Tp molecules during the subsequent coating procedure. Meanwhile, the -NH2 groups in the skeleton of NH2-Fe-MIL-88B could also be used as anchors to covalently connect TpPa-1-COF shell and migration channels for effective charge transfer. This uniformly covered core–shell structure would endow these composites with much more contact area and imine bond linkage between the Fe-MOFs core and COFs shell. Compared with the random packing structure, the uniformly covered Fe-MOF@COF-3 composite possessed a higher proportion of Fe2+ to Fe3+. As a result, the optimized Fe-MOF@COF-3 catalyst could achieve the highest photo-Fenton degradation efficiency of 93.9% for tetracycline hydrochloride (TC⋅HCl), which was much higher than 54.8% of pure NH2-Fe-MIL-88B. In addition, the uniform TpPa-1-COF shell could further effectively enhance the stability of NH2-Fe-MIL-88B by protecting Fe ions from leaching, and the toxicity of the water samples treated with our photo-Fenton degradation process declined obviously. All these merits will endow Fe-MOF@COF-3 photo-Fenton catalyst great potential application value as in the field of environmental governance.

polymer science
Removal of water-soluble lignin model pollutants with graphene oxide loaded ironic sulfide as an efficient adsorbent and heterogeneous Fenton catalyst

Junjian An,Shanshan Wang,Mengxuan Huang,Jian Zhang,Peng Wang

DOI: https://doi.org/10.1016/j.arabjc.2022.104338

IF: 6.212

2022-12-01

Arabian Journal of Chemistry

Abstract:Advanced oxidation processes (AOPs) have gained extensive attentions in organic decontamination in past decades. Iron-contained compound is an interesting material due to its adsorptive and catalytic performance, which has been applied widely in AOPs. Thus, graphene oxide (GO)-Fe3S4 composite was synthesized by a solvothermal process and assessed as an effective adsorptive and catalytic dual functional material in this work. The composite displayed prominent adsorptive and heterogeneous Fenton-like catalytic performance, which was affected by preparation condition and the reactive parameters in catalytic system. Under optimized reactive conditions, the GO-Fe3S4 composite yielded rapid degradation of vanillic acid, which the corresponding apparent rate constant was 1.81 × 10−1 min−1. Catalytic mechanism analysis revealed that the main oxygen species was hydroxyl radicals bounded on the surface of the composite. And the generation of •O2– was contributed to the conversion of H2O2 to •OH. The analysis of degradation intermediates of vanillic acid and p-hydroxybenzoic showed that these compounds could be mineralized to small molecules. The prominent enhanced heterogeneous Fenton-like catalytic performance of GO-Fe3S4 was due to a larger specific surface area, plenty of reductive active sites in the composite and a high mass transfer efficiency of oxidizing radicals in the reactive system.

chemistry, multidisciplinary
Enhancing the Fenton Catalytic Activity of Fe-MOFs by Incorporation of Carbon Nanotubes: the Crucial Role of C-O-Fe Coordination Structure

Jingjing Tang,Hongchao Li,Xuan Zhang,Jieshu Qian,Bingcai Pan

DOI: https://doi.org/10.1016/j.seppur.2024.129655

IF: 8.6

2025-01-01

Separation and Purification Technology

Abstract:Fe-based metal-organic frameworks (MOFs) have garnered significant attention as catalysts for heterogeneous Fenton reactions, while the limited efficiency of the Fe(III)/Fe(II) redox cycle hinders their widespread use in wastewater treatment. Herein, we successfully incorporated carbon nanotubes (CNTs) into MIL-101(Fe) to modulate the coordination environment of Fe for achieving better catalytic activity. The MIL-101(Fe)/CNTs/ H2O2 system shows outstanding performance in degrading various pollutants, with the catalytic activity of the MIL-101(Fe)/CNTs composites (98.8%) significantly surpassing that of MIL-101(Fe) alone (26.4%) or CNTs alone (3.5%). Multiple experimental findings suggest that this synergistic effect is primarily attributed to the C-O-Fe bridge bonds resulting from the interaction of surface carboxyl groups on CNTs with Fe in MIL-101(Fe). This unique coordination structure accelerates the redox cycle of Fe(III)/Fe(II), thereby promoting the generation of hydroxyl radicals (HO center dot). Furthermore, the MIL-101(Fe)/CNTs composites demonstrate excellent reusability and stability, maintaining effectiveness over a wide pH range from 3.0 to 6.5. This study provides new insights into regulating the microstructure of Fe-based MOFs to enhance their Fenton catalytic activity.
High performance photocatalyst TiO2@UiO-66 applied to degradation of methyl orange

Jingyi Yang,Xue Chang,Fang Wei,Zixiao Lv,Huiling Liu,Zhan Li,Wangsuo Wu,Lijuan Qian

DOI: https://doi.org/10.1186/s11671-023-03894-6

2023-09-11

Abstract:MOFs have considerable adsorption capacity due to their huge specific surface area. They have the characteristics of photocatalysts for their organic ligands can absorb photons and produce electrons. In this paper, the photodegradation properties of TiO2 composites loaded with UiO-66 were investigated for the first time for MO. A series of TiO2@UiO-66 composites with different contents of TiO2 were prepared by a solvothermal method. The photocatalytic degradation of methyl orange (MO) was performed using a high-pressure mercury lamp as the UV light source. The effects of TiO2 loading, catalyst dosage, pH value, and MO concentration were investigated. The results showed that the degradation of MO by TiO2@UiO-66 could reach 97.59% with the addition of only a small amount of TiO2 (5 wt%). TiO2@UiO-66 exhibited significantly enhanced photoelectron transfer capability and inhibited efficient electron-hole recombination compared to pure TiO2 in MO degradation. The composite catalyst indicated good stability and reusability when they were recycled three times, and the photocatalytic reaction efficiencies were 92.54%, 88.76%, and 86.90%. The results provide a new option to design stable, high-efficiency MOF-based photocatalysts.
Magnetic COFs As Catalyst for Fenton-like Degradation of Sulfamethazine.

Shuting Zhuang,Jianlong Wang

DOI: https://doi.org/10.1016/j.chemosphere.2020.128561

IF: 8.8

2021-01-01

Chemosphere

Abstract:A novel magnetic covalent organic frameworks (COFs) (Fe2O3@COFs) composite was fabricated by restricting the growth of Fe2O3 in the nanoscale channel of COFs, which can be used as the Fenton-like catalyst for sulfamethazine (SMT) degradation in aqueous solution. The as-prepared catalyst had good crystallinity, porosity and nano-flower-shaped morphology, and the encapsulated Fe2O3 particles were well-distributed and restrained in the nano-channels of COFs. Furthermore, magnetic COFs could not only adsorb SMT, but also catalyze the Fenton-like degradation of SMT in the presence of H2O2 (about 100% of removal efficiency). Acidic condition (pH = 3) facilitated SMT degradation in Fe2O3@COFs/H2O2. system. In consecutive 5 cycles, the catalyst showed a good stability and reusability with a high removal efficiency (>96%), a good mineralization rate (about 35%), and a very low Fe2+ leaching (below 0.1 mg L-1). Electron spin resonance (ESR) and quenching tests proved that hydroxyl radicals were the main reactive species generated in the Fe2O3@COFs/H2O2 system for the degradation of SMT. In conclusion, Fe2O3@COFs is a promising Fenton-like catalyst for the degradation of SMT and other toxic organic pollutants in water and wastewater. (C) 2020 Elsevier Ltd. All rights reserved.

Fe-based Metal Organic Framework/graphene Oxide Composite As an Efficient Catalyst for Fenton-like Degradation of Methyl Orange

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

MOF/graphene Oxide Composite As an Efficient Adsorbent for the Removal of Organic Dyes from Aqueous Solution.

Ultrathin Graphene Oxide Encapsulated in Uniform MIL-88A(Fe) for Enhanced Visible Light-Driven Photodegradation of RhB

The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

Facile Self-Assembly Synthesis of Γ-Fe2o3 /graphene Oxide for Enhanced Photo-Fenton Reaction.

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Preparation of Fe 3 O 4 @GO@MIL-101 nanocomposites and efficient degradation of oxytetracycline hydrochloride by promoting charge separation during the photo-Fenton process

A novel Fe/Mo co-catalyzed graphene-based nanocomposite to activate peroxymonosulfate for highly efficient degradation of organic pollutants

Fenton-like degradation of methyl orange over CeO2 loaded on porous Al2O3: Catalyst preparation, efficiency and mechanism

Magnetic Fe 3 O 4 nanoparticles supported on carbonized corncob as heterogeneous Fenton catalyst for efficient degradation of methyl orange

MOF-5/Graphene Oxide Composite Photocatalyst for Enhanced Photocatalytic Activity of Methylene Blue Degradation Under Solar Light

Preparation of a GO/MIL-101(Fe) Composite for the Removal of Methyl Orange from Aqueous Solution

Accelerating Fe(Iii)/Fe(Ii) Cycle Via Fe(Ii) Substitution For Enhancing Fenton-Like Performance Of Fe-Mofs

Highly photocatalytic activity of novel Fe-MIL-88B/GO nanocomposite in the degradation of reactive dye from aqueous solution

Toward efficient removal of organic pollutants in water: A tremella-like iron containing metal-organic framework in Fenton oxidation

Synthesis of Uniformly Covered Fe-MOF@COF Heterostructures for Boosting Photo-Fenton Catalysis

Removal of water-soluble lignin model pollutants with graphene oxide loaded ironic sulfide as an efficient adsorbent and heterogeneous Fenton catalyst

Enhancing the Fenton Catalytic Activity of Fe-MOFs by Incorporation of Carbon Nanotubes: the Crucial Role of C-O-Fe Coordination Structure

High performance photocatalyst TiO2@UiO-66 applied to degradation of methyl orange

Magnetic COFs As Catalyst for Fenton-like Degradation of Sulfamethazine.