Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Robotic polishing with force controlled end effector and multi-step path planning

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Surface polishing by industrial robots: a review

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Development and Polishing Process of a Mobile Robot Finishing Large Mold Surface

Region-adaptive Path Planning for Precision Optical Polishing with Industrial Robots

Optimization of the Polishing Efficiency and Torque by Using Taguchi Method and ANOVA in Robotic Polishing

Active Compliance Smart Control Strategy of Hybrid Mechanism for Bonnet Polishing

Development of Sensorless Force-Control-Based End-Effector for Automated Robot Polishing

Research and application on force control of industrial robot polishing concave curved surfaces

Ultra-precision Robotic Sub-Aperture Polishing of Curved Mirrors

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Robot Precision Machining System with Ultrasonic Polishing for Free-form Surfaces

Design of Passive Constant-Force End-Effector for Robotic Polishing of Optical Reflective Mirrors

Kinematics Simulation of Adaptive Polishing Robot for Large Freeform Surface

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Design and Analysis of a Compliant End-Effector for Robotic Polishing Using Flexible Beams

A polishing force control strategy for robot pneumatic end-effector based on adaptive sliding mode backstepping algorithm

Review on robot-assisted polishing: Status and future trends

Robotic Magnetorheological Finishing Technology Based on Constant Polishing Force Control