Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Investigation Of Non-Negativity Constraint On Basis Images In Half-Rotation Data Reconstruction In Spectral Ct

An Investigation of Regularization for Basis Image Reconstruction in Spectral CT

Investigation of the Linearized Spectral Contribution in the Simultaneous Estimation of Spectra and Basis Images in Multispectral CT Reconstruction

Basis-image reconstruction directly from sparse-view data in spectral CT

Accurate Reconstruction of Multiple Basis Images Directly from Dual Energy CT Data

TU‐G‐110‐09: Spectral CT (SCT) Reconstruction Using Tight Wavelet Frames

Optimization-based Reconstruction for Correcting Non-Linear Partial Volume Artifacts in CT

Non-convex primal-dual algorithm for image reconstruction in spectral CT

Spectral CT reconstruction via low-rank representation and structure preserving regularization

Spectral CT reconstruction via Spectral-Image Tensor and Bidirectional Image-gradient minimization

An Investigation of Direct Image Reconstruction in DECT with Physical Data

Image reconstruction and scan configurations enabled by optimization-based algorithms in multispectral CT

A Preliminary Study on Explicit Compensation for the Non-Linear-partial-volume Effect in CT

Preliminary Study of Image Reconstruction from Sparse-View Data in Phase-Contrast CT

A Novel Image Optimization Method for Dual-Energy Computed Tomography

Analysis of Solution Existence, Uniqueness, and Stability of Discrete Basis Sinograms in Multispectral CT

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

Investigation of Iterative Image Reconstruction in Low-Dose Breast CT

Experimental study to optimize configurations of PCD Spectral CT.

High resolution image reconstruction with constrained, total-variation minimization

Image Domain Multi-Material Decomposition Noise Suppression Through Basis Transformation and Selective Filtering